I have a 1970 sl70 engine that is completely rebuilt. I had it rebuilt to use on my '98 z50 for a street legal project, but i have lost interest and since bought a 91 ct70. The engine has been completely disassembled and every nut and bolt has been gone over. The cases were split and everything was glass beaded and the necessary parts were painted. Every hole was tapped and bolt die'd. The bottom end was gone through and rebuilt using the original gears, the clutch was rebuilt, cylinder was bored 2nd over (.5mm), cylinder head was completley gone through, valves lapped, new keepers and new stem seal, a new did cam chain, new oil seals, carb was gone through and rebuilt. This is a show quality rebuild, the only thing that is not original is the cases were put back together with allen head screws instead of phillips, and the flywheel cover has been cut-out where the counter shaft is. The valves have been set, it has spark and compression, carb is good, but i have not run the motor. I havent had time to finish it in months. All it needs is a kickstarter seal and a round cam cover. Other than those small things it is ready to go. It includes the intake and carb, and airbox, clutch and throttle cable, and coil. I would like $250 plus shipping for it. If there is any interest i can get some pics. If not i will eventually finish it and put it on ebay.
My email is
bass-taper@hotmail.com