Planet Minis - View Single Post

s_10onbagz · 07-08-2009, 05:04 PM

Yup, I did keep that in mind. I was basically looking to see if a CR85 rear master cylinder and caliper would work since NSR parts are such a pain to find but it looks like the CR85 master cylinder is 50mm and the CR85 caliper is about 64mm. I guess that is a big no go without some fab work.

I would use the complete rear caliper bracket as well, but the CR85 has an offset tab that keeps the caliper from spinning where as the NSR tab is in line with the axle. The CR85 also uses a 14mm axle and a 190mm rear rotor, so you would have to press a sleeve into the axle hole, and order up an aftermarket 190mm rotor. The NSR rear caliper and bracket is like $120, which isn't horrible. I guess I will have to see if they are still available.

07-08-2009, 05:04 PM	#4 (permalink)
s_10onbagz 3rd Gear Member Join Date: Sep 2007 Location: Connecticut. Posts: 1,550	Re: NSR Rear Caliper. Yup, I did keep that in mind. I was basically looking to see if a CR85 rear master cylinder and caliper would work since NSR parts are such a pain to find but it looks like the CR85 master cylinder is 50mm and the CR85 caliper is about 64mm. I guess that is a big no go without some fab work. I would use the complete rear caliper bracket as well, but the CR85 has an offset tab that keeps the caliper from spinning where as the NSR tab is in line with the axle. The CR85 also uses a 14mm axle and a 190mm rear rotor, so you would have to press a sleeve into the axle hole, and order up an aftermarket 190mm rotor. The NSR rear caliper and bracket is like $120, which isn't horrible. I guess I will have to see if they are still available.