Planet Minis

Z

Available aftermarket.

Pimpindahoes

i ran the Kitaco one. works alright.

but the 5 row that Z posted is a nice piece.

run an oil temp on the bike and watch the temp with your current cooler. You probably dont need anything more unless your really riding the bike hard most of the time or dont change oil religiously.

cdoublejj

How does any one get those speeds out of a bike i have 125 and people are doing 50 with 70cc mine does 40 at almost wot then i have to lets cool if i go over a mile or 3. what kind of gearing should i get? also does any one know how tall in inches the TB cooler is?

Adam z50+R

i'm currently using a Daytona 7 core cooler on my Z - 124 take'
it gets hot ,so does the lines
am very interested in an inline thermostat
as Firepower said "Lockhart thermo" does any one have a link to this???

nielspbr

Close to home MOCAL - OIL THERMOSTAT 3/8 PUSH ON - M-OT-6PO

Or if you want to go bling you can use an active thermostat
Loading...
or
Thermostat Kit for Oil Coolers - Thomas Geisler Tuningteam - Artikeldetailansicht

I am running a jialing 138 without oilcooler in a pbr(st90).
And a small skyteam stock oilcooler on a lifan 150 in a monkey clone until I can figure out where to mount a daytona 7-row cooler. (The earls core and the valve cap breather are clashing)

Adam z50+R

cheers niels
the active ones are very nice
but the mocal suits my purpose too and priced much better

firepower354

Lockhart is dead, but others have inlines.


Mocal push-fit is sized nicely. The tricker A/N one has huge -8/10/12 fittings.

__________________
If it has my name on it I did it;)

FirepowerMinis.com
Custom FPM parts and engines.
Parts and service for all makes.
Honda Trail Bikes parts and accessories.
Pitster/Piranha/Thumpstar bikes, parts, engines and accessories.

Adam z50+R

cheerz firepower
mocal it is then.

firepower354

Prolly can take it apart and ID tap the inlets for a more mini-sized set of lines.

__________________
If it has my name on it I did it;)

FirepowerMinis.com
Custom FPM parts and engines.
Parts and service for all makes.
Honda Trail Bikes parts and accessories.
Pitster/Piranha/Thumpstar bikes, parts, engines and accessories.

zack250

Perma-Cool makes an inline thermostat that has NPT ends so that you could thread whatever fitting you wish into them.

Remote Oil Thermostats



I'm toying around getting one since I think my TB oil cooler cools my TB 117 too much since I'm running at 55 mph most of the time and I'm not running in the efficient part of the engine temps. The oil cooler always feels too cool.

Z

There are japanese thermostats that come on at 70 degrees celsius and run $160-$300 depending on how fancy you want the 6AN fittings and anodizing to be. Work like a charm with earl's 6AN Hose.

50r

not street legal but heres a pic of my oil cooler.i have an extra takegawa thermostat bolt for sale too,pm me if interested.
oil cooler and lines from chp for $235.
Attachment 50682

dsrt4

Yikes! I am just running the Cheapy oil cooler that came with My iron barrell 140cc kit from tbolt. I have 400 or so miles on the engine with it so it must be ok..I re sealed the ends before I installed it but it seems to be working very well.I have had some 50 mph 30 minute runs with it and Its always ran like a champ..I'm running rotella t in it..