Planet Minis - View Single Post

507 brett · 11-01-2009, 01:38 PM

try taking it out and turning it 180 degrees. there should be a groove on one side and a slit on the other.. the groove goes all the way down the slide and shout line up with an alignment tab on the inside of the carb. the slit lines up with the idle screw inside the carb. when they are switched (or when the slides turned wrong) the tab holds the slide up.

11-01-2009, 01:38 PM	#4 (permalink)
507 brett 3rd Gear Member Join Date: Jan 2007 Location: mt. pleasant, NC Posts: 2,529	Re: throttle help try taking it out and turning it 180 degrees. there should be a groove on one side and a slit on the other.. the groove goes all the way down the slide and shout line up with an alignment tab on the inside of the carb. the slit lines up with the idle screw inside the carb. when they are switched (or when the slides turned wrong) the tab holds the slide up.