Planet Minis

pitbike120 · 11-02-2009, 06:02 AM

I checked the slide in the carb and it is in all the way. I took the filter off and looked at it. and i droped the needle, still nothing.

pitbike120 · 11-02-2009, 06:20 AM

ok i checked the slide and it is closed all the way. I took the air filter off and looked in it. I still cant get it to start.

pitbike120 · 11-02-2009, 07:04 AM

ok i checked the slide and it is closed all the way. I took the air filter off and looked in it. I still cant get it to start.

pitbike120 · 11-03-2009, 06:12 PM

Ok i took my bike to a shop in town today. he cant get it to start. he re timed it, set the valves, and went through the carb. Does any body have any more ideas. please

Paxracing · 11-03-2009, 06:16 PM

You pay shipping and i will make it run .

pitbike120 · 11-03-2009, 06:29 PM

I'm about to take you up on that. lol. I might go as far too say you pay shipping you can have the piece of s**t... lmao

Paxracing · 11-03-2009, 06:30 PM

pm if you need my address.

foster212 · 11-03-2009, 06:37 PM

take the bowl off blow where the fuel line is and lift the floats up and half way they should cut ur air off if u can still blow then ur needle is backwards or warn

pitbike120 · 11-03-2009, 06:39 PM

Quote:

Originally Posted by Paxracing

pm if you need my address.

K I'LL let you know. this is a dum question but do you know if i have the cam in backward. I did a cam for my friend and his come from CHP and the cam was built 180 out... do you know if TB kits do the same thing. I have the race cam for the race head. I had to modify the stock head for it to fit.

Paxracing · 11-03-2009, 06:41 PM

pull the cam gear off the cam, can you move the cam with your hand ?

pitbike120 · 11-03-2009, 06:45 PM

Quote:

Originally Posted by Paxracing

pull the cam gear off the cam, can you move the cam with your hand ?

Yea but it will only move about half a rotation. but it did spin really good and free till the lifters went back in. lol

Paxracing · 11-03-2009, 06:47 PM

If you can move the cam its right.

pitbike120 · 11-03-2009, 06:48 PM

Quote:

Originally Posted by pitbike120

Yea but it will only move about half a rotation. but it did spin really good and free till the lifters went back in. lol

lol you no what i mean it feels like the stock cam did. before i tore it down

pitbike120 · 11-03-2009, 06:51 PM

Quote:

Originally Posted by Paxracing

If you can move the cam its right.

ok. what the hell then. I hade it running out of time. I was 2 teeth to the F side of the timing mark. it did'nt feel right so i tore it down and found that i was out so i fixed it. now nothing

BORN2RIDE#56 · 11-03-2009, 07:19 PM

Im going to dinner but when i get back i will tear my carb off the bike & post all the settings in here for you. (i had my carb on a 143/stock head) As in jets/needle setting/air& fuel mixture & if all your setting are right send it to don @ pax & he will get it done for you.

pitbike120 · 11-03-2009, 07:25 PM

Quote:

Originally Posted by BORN2RIDE#56

Im going to dinner but when i get back i will tear my carb off the bike & post all the settings in here for you. (i had my carb on a 143/stock head) As in jets/needle setting/air& fuel mixture & if all your setting are right send it to don @ pax & he will get it done for you.

Thank you. But if you dont have time that's cool. That is alot of BS to go through.

BORN2RIDE#56 · 11-03-2009, 07:27 PM

Quote:

Originally Posted by pitbike120

Thank you. But if you dont have time that's cool. That is alot of BS to go through.

its cool i get to clean it after...

pitbike120 · 11-03-2009, 07:35 PM

Quote:

Originally Posted by BORN2RIDE#56

its cool i get to clean it after...

LMAO!!! Ok then... Thanks

mtbracer · 11-03-2009, 07:47 PM

jet 160/17.5

conant19 · 11-03-2009, 09:54 PM

crazy idea but change your spark plug i had a motor that did the same thing as yours pull the plug it would spark put it back in and cause the compression would keep it from sparking in the head. so try a plug b4 you ship it off. could be could not be but that my 2 cents

11-02-2009, 06:02 AM	#21 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Re: Help!!! Me please I checked the slide in the carb and it is in all the way. I took the filter off and looked at it. and i droped the needle, still nothing.

11-02-2009, 06:20 AM	#22 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Re: Help!!! Me please ok i checked the slide and it is closed all the way. I took the air filter off and looked in it. I still cant get it to start.

11-02-2009, 07:04 AM	#23 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Re: Help!!! Me please ok i checked the slide and it is closed all the way. I took the air filter off and looked in it. I still cant get it to start.

11-03-2009, 06:12 PM	#24 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Re: Help!!! Me please Ok i took my bike to a shop in town today. he cant get it to start. he re timed it, set the valves, and went through the carb. Does any body have any more ideas. please

11-03-2009, 06:16 PM	#25 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,518 My Mood:	Re: Help!!! Me please You pay shipping and i will make it run .

11-03-2009, 06:29 PM	#26 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Re: Help!!! Me please I'm about to take you up on that. lol. I might go as far too say you pay shipping you can have the piece of s**t... lmao

11-03-2009, 06:30 PM	#27 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,518 My Mood:	Re: Help!!! Me please pm if you need my address.

11-03-2009, 06:37 PM	#28 (permalink)
foster212 PM Newbie Join Date: Oct 2009 Location: anderson ca Posts: 79 My Mood:	Re: Help!!! Me please take the bowl off blow where the fuel line is and lift the floats up and half way they should cut ur air off if u can still blow then ur needle is backwards or warn

11-03-2009, 06:41 PM	#30 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,518 My Mood:	Re: Help!!! Me please pull the cam gear off the cam, can you move the cam with your hand ?

11-03-2009, 06:47 PM	#32 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,518 My Mood:	Re: Help!!! Me please If you can move the cam its right.

11-03-2009, 07:19 PM	#35 (permalink)
BORN2RIDE#56 3rd Gear Member Join Date: Apr 2008 Location: RIVERSIDE Posts: 3,348 My Mood:	Re: Help!!! Me please Im going to dinner but when i get back i will tear my carb off the bike & post all the settings in here for you. (i had my carb on a 143/stock head) As in jets/needle setting/air& fuel mixture & if all your setting are right send it to don @ pax & he will get it done for you.

11-03-2009, 07:47 PM	#39 (permalink)
mtbracer 2nd Gear Member Join Date: Mar 2005 Location: The 661 / 714 Posts: 912	Re: Help!!! Me please jet 160/17.5

11-03-2009, 09:54 PM	#40 (permalink)
conant19 1st Gear Member Join Date: Nov 2008 Location: Mtv Posts: 171 My Mood:	Re: Help!!! Me please crazy idea but change your spark plug i had a motor that did the same thing as yours pull the plug it would spark put it back in and cause the compression would keep it from sparking in the head. so try a plug b4 you ship it off. could be could not be but that my 2 cents

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)