Planet Minis

stevec · 09-21-2009, 10:50 PM

Are they made in Italy?

trackstar · 09-21-2009, 11:10 PM

Quote:

Originally Posted by motofox21

For this quality of a wheel I would think a local machinest or someone on the forum could machine a rotor and sprocket spacer/carrier to the necessary specs, relatively inexpensive.

The problem is that the wheels are too wide, you would have to machine nearly 1/2 inch off the wheel for the sprocket and rotor to fit.

J Pezzy · 09-21-2009, 11:14 PM

will these work on a marzocchi front end and a BBR v3 frame kit and supercomp swinger.

AHPminis · 09-22-2009, 07:36 AM

Quote:

Originally Posted by J Pezzy

will these work on a marzocchi front end and a BBR v3 frame kit and supercomp swinger.

They will work on a Marzocchi front end that has the 15mm axle carriers only. According to my information from Mobster they are made in Italy.

motofox21 · 09-22-2009, 10:52 AM

Quote:

Originally Posted by trackstar

The problem is that the wheels are too wide, you would have to machine nearly 1/2 inch off the wheel for the sprocket and rotor to fit.

My bad Trackstar...my brain was thinkin the 65 set up was wider, Doh! No longer worth the work.

AHPminis · 09-22-2009, 01:20 PM

Ok I am going to have 4 sets of these shortly, 1 set is spoken for, so I have 3 sets left so let me know who seriously wants a set.

nautha · 09-22-2009, 01:53 PM

Quote:

Originally Posted by J Pezzy

will these work on a marzocchi front end and a BBR v3 frame kit and supercomp swinger.

it will fit for sure the supercomp swinger, as far as for the front, it all depend by you triple clamp width, if it is regular marzocchi/klx110 clamp width i dont think so; here in Italy we always use wider triple clamps so to switch an mx front end into a motard set.
You better ask to Mark (ahp) or the guys at BBR, i've seen that they lately built a Klx V3 motard with a front Marzocchi triple clamp that seem to be the same that they sell along with the forks...

stevec · 09-22-2009, 06:34 PM

Quote:

Originally Posted by AHPminis

They will work on a Marzocchi front end that has the 15mm axle carriers only. According to my information from Mobster they are made in Italy.

That's a steal of a deal if they're really made in Italy.

AHPminis · 09-24-2009, 09:38 AM

Ok guys I am looking for one more person to commit to a set of these rims and then I am bringing them via UPS so they will get here in about 3-4 days. Let me know who wants to pick up the last set that will be available from these that I am bringing in.

AHPminis · 10-05-2009, 11:55 AM

All 4 sets coming in on Oct 7th are spoken for. Whoever wants to get in on the next batch let me know, I will need to get another 4 sets to have the UPS shipping from Italy worth it.

AHPminis · 10-08-2009, 10:32 AM

First few sets shipping out today to customers, these wheels are sick:

shw911 · 10-08-2009, 10:49 AM

Mark,
What is the width of the hubs?

Thanks.

AHPminis · 10-08-2009, 10:56 AM

Quote:

Originally Posted by shw911

Mark,
What is the width of the hubs?

Thanks.

Front - 2.75"
Rear - 5.25"

chester3000 · 10-08-2009, 01:49 PM

ask them to make a set that will work on the kx65

without any machine work....

AHPminis · 10-08-2009, 02:55 PM

Quote:

Originally Posted by chester3000

ask them to make a set that will work on the kx65

without any machine work....

Thats not happening, but I do know they are cranking out more of these already because they are selling like crazy in Italy. USA has to get on the buying sick motard wheel set bandwagon

muxster · 10-08-2009, 03:26 PM

would these work on a CT 70?

AHPminis · 10-08-2009, 04:41 PM

Quote:

Originally Posted by muxster

would these work on a CT 70?

Not without modification, these run a 15mm axle.

KLJ#24 · 10-09-2009, 07:15 AM

I Just put a set of these wheels on my bike the other day. And damn they look nice! Still haven't testet them yet thought. Engine needs replacing

Few pics for you guys:

nautha · 10-09-2009, 07:19 AM

Quote:

Originally Posted by KLJ#24

I Just put a set of these wheels on my bike the other day. And damn they look nice! Still haven't testet them yet thought. Engine needs replacing

Few pics for you guys:

Very nice bike&work!

Kurlon · 10-09-2009, 09:08 AM

Quote:

Originally Posted by KLJ#24

I Just put a set of these wheels on my bike the other day. And damn they look nice! Still haven't testet them yet thought. Engine needs replacing

Who's making floating rotors for SDG pattern wheels? Those look quite nice.

09-21-2009, 10:50 PM	#41 (permalink)
stevec 2nd Gear Member Join Date: Sep 2007 Posts: 425 My Mood:	Re: 12" tubeless motard wheels from Italy - 15mm axle Are they made in Italy?

09-21-2009, 11:14 PM	#43 (permalink)
J Pezzy 3rd Gear Member Join Date: Oct 2008 Location: vancouver Wa Posts: 1,160 My Mood:	Re: 12" tubeless motard wheels from Italy - 15mm axle will these work on a marzocchi front end and a BBR v3 frame kit and supercomp swinger.

09-22-2009, 01:20 PM	#46 (permalink)
AHPminis Advertiser Join Date: Aug 2004 Location: East Coast - PA Posts: 4,631	Re: 12" tubeless motard wheels from Italy - 15mm axle Ok I am going to have 4 sets of these shortly, 1 set is spoken for, so I have 3 sets left so let me know who seriously wants a set. __________________ Website - www.ahpminis.com Email - mark@ahpminis.com AHP - TB -Sano - RB - Kitaco - iShock - Fox - Marzocchi - F50s - Utopia - Takegawa - Crower

09-24-2009, 09:38 AM	#49 (permalink)
AHPminis Advertiser Join Date: Aug 2004 Location: East Coast - PA Posts: 4,631	Re: 12" tubeless motard wheels from Italy - 15mm axle Ok guys I am looking for one more person to commit to a set of these rims and then I am bringing them via UPS so they will get here in about 3-4 days. Let me know who wants to pick up the last set that will be available from these that I am bringing in. __________________ Website - www.ahpminis.com Email - mark@ahpminis.com AHP - TB -Sano - RB - Kitaco - iShock - Fox - Marzocchi - F50s - Utopia - Takegawa - Crower

10-05-2009, 11:55 AM	#50 (permalink)
AHPminis Advertiser Join Date: Aug 2004 Location: East Coast - PA Posts: 4,631	Re: 12" tubeless motard wheels from Italy - 15mm axle All 4 sets coming in on Oct 7th are spoken for. Whoever wants to get in on the next batch let me know, I will need to get another 4 sets to have the UPS shipping from Italy worth it. __________________ Website - www.ahpminis.com Email - mark@ahpminis.com AHP - TB -Sano - RB - Kitaco - iShock - Fox - Marzocchi - F50s - Utopia - Takegawa - Crower

10-08-2009, 10:32 AM	#51 (permalink)
AHPminis Advertiser Join Date: Aug 2004 Location: East Coast - PA Posts: 4,631	Re: 12" tubeless motard wheels from Italy - 15mm axle First few sets shipping out today to customers, these wheels are sick: __________________ Website - www.ahpminis.com Email - mark@ahpminis.com AHP - TB -Sano - RB - Kitaco - iShock - Fox - Marzocchi - F50s - Utopia - Takegawa - Crower

10-08-2009, 10:49 AM	#52 (permalink)
shw911 "Eating Ramen" Join Date: Feb 2007 Location: Los Angeles, CA Posts: 1,894	Re: 12" tubeless motard wheels from Italy - 15mm axle Mark, What is the width of the hubs? Thanks.

10-08-2009, 01:49 PM	#54 (permalink)
chester3000 2nd Gear Member Join Date: Jul 2006 Location: Portland, Or. Posts: 294	Re: 12" tubeless motard wheels from Italy - 15mm axle ask them to make a set that will work on the kx65 without any machine work....

10-08-2009, 03:26 PM	#56 (permalink)
muxster 2nd Gear Member Join Date: Sep 2008 Location: Redondo Beach, Ca. Posts: 471 My Mood:	Re: 12" tubeless motard wheels from Italy - 15mm axle would these work on a CT 70?

10-09-2009, 07:15 AM	#58 (permalink)
KLJ#24 PM Newbie Join Date: Jun 2008 Location: Denmark Posts: 30 My Mood:	Re: 12" tubeless motard wheels from Italy - 15mm axle I Just put a set of these wheels on my bike the other day. And damn they look nice! Still haven't testet them yet thought. Engine needs replacing Few pics for you guys:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)