Planet Minis

mxkid247 · 11-02-2009, 09:49 PM

im getting it back from the shop tomorrow and most likely shipping it out tomorrow hopefully

Staggs Racing · 11-02-2009, 09:51 PM

Quote:

Originally Posted by mxkid247

15/420 Counter shaft sprocket SPECS: Bore and Stroke: 60mm X 55mm (155.7cc)

its got all the pitster pro stamps on it im not bringing down pitster pro its actually my favorite company i want the lxr more then anything but i cant afford it when everything on my ssr breaks and motors dont work

I told you from the beginning to send back your original motor to us and we would see what was wrong or had gone wrong with it and try to warranty it for you and you refused and stated you will just buy a new motor. Other issues you had with your ssr such as a bent subframe from you flipping the bike backwards has nothing to do with the bike. Everytime you email me I reply wanting to help and in the end get a email stating you will just buy something new etc. I can understand your frustration to a point, how ever if you don't want our help that I offer then nothing can be done to fix the issue. We can help complete any warranty issues if you don't want to comply with them by sending back the defective product for us to inspect and take a look at.

Blackwoodz · 11-02-2009, 09:53 PM

Quote:

Originally Posted by mxkid247

timing does have something to do with firing tho go read a book

dude read your posts and mine...I said timing has nothing to do with wiring ..not firing... Your entire thread is misleading

mxkid247 · 11-02-2009, 09:55 PM

the throttle stuck and flipped it over....the mount for the ignition on the old motor is snapped... i dont wanna start fighting with you because you have been nothing but help to me with this thing and i had no problems with you

mxkid247 · 11-02-2009, 09:57 PM

alright guys a put this on here for some help didnt mean to start everyone fighting and getting different companys involved myy baddd just thought id get some help before i send the motor back

Staggs Racing · 11-02-2009, 09:58 PM

Quote:

Originally Posted by mxkid247

the throttle stuck and flipped it over....the mount for the ignition on the old motor is snapped... i dont wanna start fighting with you because you have been nothing but help to me with this thing and i had no problems with you

there's no fighting here turst me. But like I said we can only do so much over the internet or email. Why don't you send the original motor back as well? anyways I have some other questions for you about how his bike was or wasn't setup when you first got it. I will email you.

Pitster · 11-02-2009, 10:00 PM

Hmm seems strange you are asking for help for a Pitster Pro z155, but in fact its not a Pitster Pro z155? Did you purchase this engine from a vendor claiming it was one of our engines in a complete package, and not get what you thought? Very strange, I cant image a vendor would claim it is the same as ours when they are in fact are NOT a dealer for us. Anyway If you cant get the help you need from the vendor you purchased from, give our tech dept a call and we will see what we can do to walk you though getting it set up.
Thanks

Staggs Racing · 11-02-2009, 10:01 PM

Quote:

Originally Posted by Matified

does it come with a warranty?

Sure does buddy. Everything we sell comes with a warranty.

Staggs Racing · 11-02-2009, 10:15 PM

Quote:

Originally Posted by Pitster

Hmm seems strange you are asking for help for a Pitster Pro z155, but in fact its not a Pitster Pro z155? Did you purchase this engine from a vendor claiming it was one of our engines in a complete package, and not get what you thought? Very strange, I cant image a vendor would claim it is the same as ours when they are in fact are NOT a dealer for us. Anyway If you cant get the help you need from the vendor you purchased from, give our tech dept a call and we will see what we can do to walk you though getting it set up.
Thanks

So Professional of you. Here is a link to the motor so you can see there was no claim that it isa Pister motor or a complete Pister package(same motor though) http://www.sgr-usa.com/product_info.php?products_id=595 and don't worry we make it very clear we are not a Pitster Dealer for obviouse reasons. We do how ever sell a 155 Z Crate Engine. Thank You Gary and take care of your self.

Staggs Racing · 11-02-2009, 10:19 PM

Quote:

Originally Posted by firepower354

Put the ignition from the old motor on it?

Acording to what has been said to us the ignition is wired right and it did start and run once but will not restart. Jetting has been checked, it is getting fuel,has spark and the valves are correct. Brand new motor, so it is under warranty and he will ship it back so i can check it out.

mxkid247 · 11-02-2009, 10:21 PM

yup ran for about 5 minutes no sputtering or anything weird so i dont know shop doesnt know ill send it out asap

Matified · 11-02-2009, 10:23 PM

Quote:

Originally Posted by mxkid247

15/420 Counter shaft sprocket SPECS: Bore and Stroke: 60mm X 55mm (155.7cc)

its got all the pitster pro stamps on it im not bringing down pitster pro its actually my favorite company i want the lxr more then anything but i cant afford it when everything on my ssr breaks and motors dont work

Really? has Pitster stamps on it?? do you have a picture??
I am happy to hear pitster is your favorite company, that is why when I saw the title of the thread , I wanted to be sure your "pitster" engine was running .

mxkid247 · 11-02-2009, 10:26 PM

dude im done with this ill get my help from jeremiah and it will be done with i was mislead i thought it was the pitster motor but it wasnt its just a 155 motor thanks anyway man and pitster is my favorite company for bikes i like all companys

Pitster · 11-02-2009, 10:27 PM

Quote:

Originally Posted by Staggs Racing

So Professional of you. Here is a link to the motor so you can see there was no claim that it isa Pister motor or a complete Pister package(same motor though) sgr-usa.com and don't worry we make it very clear we are not a Pitster Dealer for obviouse reasons. We do how ever sell a 155 Z Crate Engine. Thank You Gary and take care of your self.

Please read the title of the thread Jer its fairly obvious why we would question what he got. I am sure you will get the kid handled. Thanks.

Good luck MXkid and let us know if we can help
Thanks

Staggs Racing · 11-02-2009, 10:29 PM

Quote:

Originally Posted by mxkid247

be done with i was mislead i thought it was the pitster motor but it wasnt its just a 155

I will send you a email about this comment ( I don't want Pitster to get upset) and if you read online no where on our site does it state pitster engine or pitster.

mxkid247 · 11-02-2009, 10:30 PM

i know i just mistaked cause it was a 155 motor and i didnt know anyone else made them im sorry man

Staggs Racing · 11-02-2009, 10:36 PM

Quote:

Originally Posted by mxkid247

i know i just mistaked cause it was a 155 motor and i didnt know anyone else made them im sorry man

email sent

Staggs Racing · 11-02-2009, 10:47 PM

Quote:

Originally Posted by Pitster

Please read the title of the thread Jer its fairly obvious why we would question what he got. I am sure you will get the kid handled. Thanks.

Good luck MXkid and let us know if we can help
Thanks

You reply has nothing to do with the title it was directed towards SGR as that we were misleading people or acting like we sell Pitster which we do not, again for all the right and obviouse reasons. I am not going to get into online fighting with you so carry on with what your doing.

mxkid247 · 11-02-2009, 10:53 PM

i didnt think you were selling pitster parts well actually i know you werent i just didnt know there was a difference in motors sorry guys my fault

Staggs Racing · 11-02-2009, 11:02 PM

Quote:

Originally Posted by mxkid247

i didnt think you were selling pitster parts well actually i know you werent i just didnt know there was a difference in motors sorry guys my fault

only difference is logos

11-02-2009, 09:49 PM	#41 (permalink)
mxkid247 1st Gear Member Join Date: Jul 2009 Location: vernon NJ Posts: 164 My Mood:	Re: pitster pro 155z crate motor im getting it back from the shop tomorrow and most likely shipping it out tomorrow hopefully

11-02-2009, 09:55 PM	#44 (permalink)
mxkid247 1st Gear Member Join Date: Jul 2009 Location: vernon NJ Posts: 164 My Mood:	Re: pitster pro 155z crate motor the throttle stuck and flipped it over....the mount for the ignition on the old motor is snapped... i dont wanna start fighting with you because you have been nothing but help to me with this thing and i had no problems with you

11-02-2009, 09:57 PM	#45 (permalink)
mxkid247 1st Gear Member Join Date: Jul 2009 Location: vernon NJ Posts: 164 My Mood:	Re: pitster pro 155z crate motor alright guys a put this on here for some help didnt mean to start everyone fighting and getting different companys involved myy baddd just thought id get some help before i send the motor back

11-02-2009, 10:00 PM	#47 (permalink)
Pitster Advertiser Join Date: Apr 2005 Location: Lindon, Utah Posts: 3,202	Re: pitster pro 155z crate motor Hmm seems strange you are asking for help for a Pitster Pro z155, but in fact its not a Pitster Pro z155? Did you purchase this engine from a vendor claiming it was one of our engines in a complete package, and not get what you thought? Very strange, I cant image a vendor would claim it is the same as ours when they are in fact are NOT a dealer for us. Anyway If you cant get the help you need from the vendor you purchased from, give our tech dept a call and we will see what we can do to walk you though getting it set up. Thanks __________________ Home of Pitster Pro Pitbikes and GPX Moto Engines. BIG BIKES AND SMALL BIKES, Dual sport, ATV, Parts and accessories! Check out the new Classic Pitster Pro and Street minis! Get Value and Performance ALL IN ONE! Import parts, accessories, fab shop, custom motor builds, classic ct 70 parts and more. www.pitsterpro.com contact@pitsterpro.com Tech Help and forum http://www.pitsterpro.com/forum/ 801.796.7416 Dealers Welcome http://www.facebook.com/pitster1 Last edited by Pitster; 11-02-2009 at 10:07 PM.

11-02-2009, 10:21 PM	#51 (permalink)
mxkid247 1st Gear Member Join Date: Jul 2009 Location: vernon NJ Posts: 164 My Mood:	Re: pitster pro 155z crate motor yup ran for about 5 minutes no sputtering or anything weird so i dont know shop doesnt know ill send it out asap

11-02-2009, 10:26 PM	#53 (permalink)
mxkid247 1st Gear Member Join Date: Jul 2009 Location: vernon NJ Posts: 164 My Mood:	Re: pitster pro 155z crate motor dude im done with this ill get my help from jeremiah and it will be done with i was mislead i thought it was the pitster motor but it wasnt its just a 155 motor thanks anyway man and pitster is my favorite company for bikes i like all companys

11-02-2009, 10:30 PM	#56 (permalink)
mxkid247 1st Gear Member Join Date: Jul 2009 Location: vernon NJ Posts: 164 My Mood:	Re: pitster pro 155z crate motor i know i just mistaked cause it was a 155 motor and i didnt know anyone else made them im sorry man

11-02-2009, 10:53 PM	#59 (permalink)
mxkid247 1st Gear Member Join Date: Jul 2009 Location: vernon NJ Posts: 164 My Mood:	Re: pitster pro 155z crate motor i didnt think you were selling pitster parts well actually i know you werent i just didnt know there was a difference in motors sorry guys my fault

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)