Planet Minis

slowracer · 02-10-2008, 08:06 PM

Quote:

Originally Posted by blackjer

Is it the same engine the pitsters are using?

Yes

blackjer · 02-10-2008, 08:36 PM

Quote:

Originally Posted by slowracer

Yes

Can you give more specs on the bike? How are those forks compared to the X4R zokes? Hows the rear shock?

slowracer · 02-10-2008, 10:31 PM

Quote:

Originally Posted by blackjer

Can you give more specs on the bike? How are those forks compared to the X4R zokes? Hows the rear shock?

Rear shock is a DNM 8" travel
Forks (same as the X4) 8"travel
44" to 47" wheel base--just under minimoto 10" legal
Billet triples,pegs,hubs,brake pedal,motor mounts,throttle,gas cap
Chrommoly frame +1 over (stock crf70)cradle mount
ASV style levers
yx150 motor
rider campartment bigger than a klx

I do not have these for sale,when they become avalible you must go through SGR or a SSR dealer

slowracer · 02-10-2008, 10:32 PM

Quote:

Originally Posted by crf150r

Is that a akvapodic pipe? If thats how you spell it?

It is a akrapovic muffler with a custom header

noVtecHERE · 02-11-2008, 03:44 AM

goodjob Slowracer... and i think im ganna find some of the ssr forks for my bike...

SCAR8 · 02-11-2008, 08:09 AM

Quote:

Originally Posted by slowracer

Buy a set of x4 clamps,I will send you a stem for free then slide the forks up in the clamps like I told you.This is the 70 I just built and it has the same front end as yours but with the SSR/X4 tripple clamps

that bike is sick nasty! So this will be a production bike from SSR correct? Or just a one off proto type you built for them? I want one.

Grafixxs · 02-11-2008, 08:33 AM

For you lower budget guys, putting some "99" KTM65 forks on a 70 is a cake walk.

Call BBR, order a stem that they use in there SP5's ($54.00), then have the lower KTM clamp machined out for a press fit of the new stem and your done.

Total cost for us was under $400.00 and I gotta tell you, they dont seam too fade like I thought they would. Gotta love ebay.

blackjer · 02-11-2008, 08:59 AM

Quote:

Originally Posted by slowracer

Rear shock is a DNM 8" travel
Forks (same as the X4) 8"travel
44" to 47" wheel base--just under minimoto 10" legal
Billet triples,pegs,hubs,brake pedal,motor mounts,throttle,gas cap
Chrommoly frame +1 over (stock crf70)cradle mount
ASV style levers
yx150 motor
rider campartment bigger than a klx

I do not have these for sale,when they become avalible you must go through SGR or a SSR dealer

Will these have a zokes upgrade in the future?

slowracer · 02-11-2008, 09:04 AM

[QUOTE=Grafixxs;780191]For you lower budget guys, putting some "99" KTM65 forks on a 70 is a cake walk.

Call BBR, order a stem that they use in there SP5's ($54.00), then have the lower KTM clamp machined out for a press fit of the new stem and your done.

Total cost for us was under $400.00 and I gotta tell you, they dont seam too fade like I thought they would. Gotta love ebay.

QUOTE]

Anothe good idea!

slowracer · 02-11-2008, 09:07 AM

Quote:

Originally Posted by blackjer

Will these have a zokes upgrade in the future?

I don't think so,but you could always call pitster to get some zoke for legs.
Just pm if you have questions about the SSR we are getting to far off the fork fork topic
.

blackjer · 02-11-2008, 10:47 AM

Quote:

Originally Posted by slowracer

I don't think so,but you could always call pitster to get some zoke for legs.
Just pm if you have questions about the SSR we are getting to far off the fork fork topic
.

PM sent

paulc · 02-14-2008, 07:00 AM

a larger front wheel would look better
the bike looks jacked up on the front too
pc

BUZZ 50s BROTHERHOOD · 02-25-2008, 07:49 AM

the rear end need's to be lifted up to level it out a few inch's,,,,,,how do you make the ktm 65 fork's more adult proof as im going to be getting some soon for another bike im building...thank's

airboy808 · 03-06-2008, 08:01 AM

I had a set of KTM65 marz forks and I installed them on a klx110. On the klx it made it look like a chopper. Compared the ktm65 forks againist a set of "real" marz forks and the KTM ones were about 3/4" longer. So if you got to run them you will need to do two possible things:

1-Run the forks higher in the clamps than you would with real marz forks. I did this and had the forks almost touching the bars.

2-Get a rear end that lifts the rear really tall. I had a twobros long travel at first and that does not raise the bike as high as a BBR set-up.

3-Send the forks to suspension guy and have him cut the forks down about an inch.

4-Get a set of "real" marz clamps as the offset is different than the KTM clamps.

Paxracing · 03-06-2008, 08:06 AM

You no they make clamps now to put the ktm 65 front end in a crf 70.

ChainReactionR1 · 03-06-2008, 08:20 AM

Quote:

Originally Posted by Paxracing

You no they make clamps now to put the ktm 65 front end in a crf 70.

that would be the correct way, or shorten the forks. You need to know ride height on the front with the previous setupl, and the offset of the triples. Then you can determine what is different and what needs to be changed. I wouldn't go jacking up the rear and messing with other parts of the bike.

A25MX · 03-23-2008, 08:34 PM

Quote:

Originally Posted by Paxracing

You no they make clamps now to put the ktm 65 front end in a crf 70.

R u talking about the 70 marz clamp?

BUZZ 50s BROTHERHOOD · 05-15-2008, 12:06 PM

Marazochi Make Clamps To Fit Ktm Forks On A 70..???????

BUZZ 50s BROTHERHOOD · 05-15-2008, 12:06 PM

Marazochi Make Clamps To Fit Ktm Forks On A 70..???????

lillyspeedway911 · 02-10-2010, 08:57 PM

are those ktm 65 front forks, or are you just using the ktm triples

02-11-2008, 03:44 AM	#65 (permalink)
noVtecHERE 3rd Gear Member Join Date: Nov 2007 Location: Gilbert AZ Posts: 1,512	Re: How I put ktm 65 triples on 70 goodjob Slowracer... and i think im ganna find some of the ssr forks for my bike...

02-11-2008, 08:33 AM	#67 (permalink)
Grafixxs Old Fart Join Date: Apr 2007 Location: Marshall,MI Posts: 2,010 My Mood:	Re: How I put ktm 65 triples on 70 For you lower budget guys, putting some "99" KTM65 forks on a 70 is a cake walk. Call BBR, order a stem that they use in there SP5's ($54.00), then have the lower KTM clamp machined out for a press fit of the new stem and your done. Total cost for us was under $400.00 and I gotta tell you, they dont seam too fade like I thought they would. Gotta love ebay.

02-11-2008, 09:04 AM	#69 (permalink)
slowracer 3rd Gear Member Join Date: Jun 2005 Location: So-Cal Posts: 4,068 My Mood:	Re: How I put ktm 65 triples on 70 [QUOTE=Grafixxs;780191]For you lower budget guys, putting some "99" KTM65 forks on a 70 is a cake walk. Call BBR, order a stem that they use in there SP5's ($54.00), then have the lower KTM clamp machined out for a press fit of the new stem and your done. Total cost for us was under $400.00 and I gotta tell you, they dont seam too fade like I thought they would. Gotta love ebay. QUOTE] Anothe good idea!

02-14-2008, 07:00 AM	#72 (permalink)
paulc 2nd Gear Member Join Date: Dec 2007 Location: N.e of england and sometimes Cairo GA Posts: 321	Re: How I put ktm 65 triples on 70 a larger front wheel would look better the bike looks jacked up on the front too pc

02-25-2008, 07:49 AM	#73 (permalink)
BUZZ 50s BROTHERHOOD 3rd Gear Member Join Date: Oct 2006 Location: south wales..uk Posts: 1,102 My Mood:	Re: How I put ktm 65 triples on 70 the rear end need's to be lifted up to level it out a few inch's,,,,,,how do you make the ktm 65 fork's more adult proof as im going to be getting some soon for another bike im building...thank's

03-06-2008, 08:01 AM	#74 (permalink)
airboy808 2nd Gear Member Join Date: Sep 2005 Location: honolulu, hi Posts: 505	Re: How I put ktm 65 triples on 70 I had a set of KTM65 marz forks and I installed them on a klx110. On the klx it made it look like a chopper. Compared the ktm65 forks againist a set of "real" marz forks and the KTM ones were about 3/4" longer. So if you got to run them you will need to do two possible things: 1-Run the forks higher in the clamps than you would with real marz forks. I did this and had the forks almost touching the bars. 2-Get a rear end that lifts the rear really tall. I had a twobros long travel at first and that does not raise the bike as high as a BBR set-up. 3-Send the forks to suspension guy and have him cut the forks down about an inch. 4-Get a set of "real" marz clamps as the offset is different than the KTM clamps.

03-06-2008, 08:06 AM	#75 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,748 My Mood:	Re: How I put ktm 65 triples on 70 You no they make clamps now to put the ktm 65 front end in a crf 70.

05-15-2008, 12:06 PM	#78 (permalink)
BUZZ 50s BROTHERHOOD 3rd Gear Member Join Date: Oct 2006 Location: south wales..uk Posts: 1,102 My Mood:	Re: How I put ktm 65 triples on 70 Marazochi Make Clamps To Fit Ktm Forks On A 70..???????

05-15-2008, 12:06 PM	#79 (permalink)
BUZZ 50s BROTHERHOOD 3rd Gear Member Join Date: Oct 2006 Location: south wales..uk Posts: 1,102 My Mood:	Re: How I put ktm 65 triples on 70 Marazochi Make Clamps To Fit Ktm Forks On A 70..???????

02-10-2010, 08:57 PM	#80 (permalink)
lillyspeedway911 PM Newbie Join Date: Feb 2010 Location: new jersey Posts: 27	Re: How I put ktm 65 triples on 70 are those ktm 65 front forks, or are you just using the ktm triples

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)