Planet Minis

whippy431 · 11-01-2009, 09:08 PM

i actually just had my friends 50 start having issues like this.. and then stopped running all together.. his cdi box went bad... changed it.. worked ike a charm...
luckly we had an extra

PitRacerVince · 11-01-2009, 10:40 PM

I still think that u gotta "clean" the jets poke them with a lil wire or needle, cleaning sprays dont get everything out.

also wit does the plug look like? tan/white/black?

35mastr · 11-02-2009, 12:14 AM

Quote:

Originally Posted by PitRacerVince

I still think that u gotta "clean" the jets poke them with a lil wire or needle, cleaning sprays dont get everything out.

also wit does the plug look like? tan/white/black?

Plug is a tan color.

35mastr · 11-02-2009, 12:15 AM

Quote:

Originally Posted by PitRacerVince

I still think that u gotta "clean" the jets poke them with a lil wire or needle, cleaning sprays dont get everything out.

also wit does the plug look like? tan/white/black?

Jets are all squeaky clean.

35mastr · 11-02-2009, 12:17 AM

Quote:

Originally Posted by whippy431

i actually just had my friends 50 start having issues like this.. and then stopped running all together.. his cdi box went bad... changed it.. worked ike a charm...
luckly we had an extra

I am beggining to wonder,I had to relocate it just the other day. Wired tied it off and it looked a little squished with the ties. Wondering if it has internal problems now??

35mastr · 11-02-2009, 12:19 AM

Quote:

Originally Posted by mopitdevil

might try runnin a non-resitor plug, ngk c7hsa and not the cr7hsa. could also be clogged air filter, air leak or faulty cdi or connection.

None of the above as I have those plus and the only other thing is the CDI unit itself.

35mastr · 11-02-2009, 12:20 AM

Quote:

Originally Posted by arlindsay1992

Did you check your ground connection?

Its all tight with no rust or any other issues.

35mastr · 11-02-2009, 12:24 AM

Quote:

Originally Posted by Blackwoodz

raise the needle all the way see if that helps. what ignition does it have on it?

Please explain how you go about this. Pic's would be great.

It has all stock coil and ignition harness. Only running the key with no kill switch. due to the BBR bars.

Was all ok until yesterday.

35mastr · 11-02-2009, 08:34 AM

Just checked the timing and it is right on the money. Running out of stuff to check.

Blackwoodz · 11-02-2009, 08:43 AM

Quote:

Please explain how you go about this. Pic's would be great.

Unscrew the carb cap....lift the slider out....compress the spring and remove the cable from slider.....inside slider is a retaining clip holding the needle inplace....remove the reataing clip pull out the needle......on the needle is a very small E-clip.

To richen..lower the E-clip to bottom notch on needle.
To lean it.....raise E-clip to highest notch.
I am not saying this is your problem...but it sounds like it is running out of fuel.....or it has an electrical issue.

Blackwoodz · 11-02-2009, 08:43 AM

Quote:

Please explain how you go about this. Pic's would be great.

Unscrew the carb cap....lift the slider out....compress the spring and remove the cable from slider.....inside slider is a retaining clip holding the needle inplace....remove the reataing clip pull out the needle......on the needle is a very small E-clip.

To richen..lower the E-clip to bottom notch on needle.
To lean it.....raise E-clip to highest notch.
I am not saying this is your problem...but it sounds like it is running out of fuel.....or it has an electrical issue.

35mastr · 11-02-2009, 12:24 PM

Here is a list of what i have tried..

Pulled carb again and checked all jets and cleaned everything that you can.

Installed another CDI.

Installed another Coil.

Installed a complete new Harness.

Replaced all fuel in tank.

Installed another brand new plug.

Still no change.

What the hell can this be???

arlindsay1992 · 11-02-2009, 12:28 PM

Between the last time it worked, and the first time it didn't work, what changed?

35mastr · 11-02-2009, 12:37 PM

All I did was install BBR SP-5 front end and a longer swinger and I Shock.

Went to test ride it and noticed that It wont take any more than half throttle.

Very Very Frustrating

I have run out of things to check or replace chasing this down.

arlindsay1992 · 11-02-2009, 12:38 PM

Weird. Did it sit for a long time or something?

35mastr · 11-02-2009, 12:41 PM

No rode it earlier in the week.

Could this be an issue with the stator?? Also how would I check it??

35mastr · 11-02-2009, 12:53 PM

Anyone else got any ideas.

Terry can you help me out??

fiveho · 11-02-2009, 01:10 PM

pop the flywheel off and clean it up and check for any foreign debris floating around your stator

35mastr · 11-02-2009, 01:59 PM

This motor is clean and has not been in the mud. I have the side cover off and there is nothing in there beside the parts that belong in there.

35mastr · 11-02-2009, 04:08 PM

Just came in from the shop and I am still stumped on this one.

11-01-2009, 09:08 PM	#21 (permalink)
whippy431 1st Gear Member Join Date: May 2009 Location: Lacombe, LA Posts: 196	Re: Got an issue i actually just had my friends 50 start having issues like this.. and then stopped running all together.. his cdi box went bad... changed it.. worked ike a charm... luckly we had an extra

11-01-2009, 10:40 PM	#22 (permalink)
PitRacerVince 2nd Gear Member Join Date: Oct 2008 Location: Lancaster, CA Posts: 959 My Mood:	Re: Got an issue I still think that u gotta "clean" the jets poke them with a lil wire or needle, cleaning sprays dont get everything out. also wit does the plug look like? tan/white/black?

11-02-2009, 08:34 AM	#29 (permalink)
35mastr 2nd Gear Member Join Date: Sep 2009 Location: Newark,Ca. Posts: 566 My Mood:	Re: Got an issue Just checked the timing and it is right on the money. Running out of stuff to check.

11-02-2009, 12:24 PM	#32 (permalink)
35mastr 2nd Gear Member Join Date: Sep 2009 Location: Newark,Ca. Posts: 566 My Mood:	Re: Got an issue Here is a list of what i have tried.. Pulled carb again and checked all jets and cleaned everything that you can. Installed another CDI. Installed another Coil. Installed a complete new Harness. Replaced all fuel in tank. Installed another brand new plug. Still no change. What the hell can this be???

11-02-2009, 12:28 PM	#33 (permalink)
arlindsay1992 "High Speed Record Guy" Join Date: Mar 2006 Location: Northern Virginia Posts: 4,369	Re: Got an issue Between the last time it worked, and the first time it didn't work, what changed?

11-02-2009, 12:37 PM	#34 (permalink)
35mastr 2nd Gear Member Join Date: Sep 2009 Location: Newark,Ca. Posts: 566 My Mood:	Re: Got an issue All I did was install BBR SP-5 front end and a longer swinger and I Shock. Went to test ride it and noticed that It wont take any more than half throttle. Very Very Frustrating I have run out of things to check or replace chasing this down. Last edited by 35mastr; 11-02-2009 at 12:40 PM.

11-02-2009, 12:38 PM	#35 (permalink)
arlindsay1992 "High Speed Record Guy" Join Date: Mar 2006 Location: Northern Virginia Posts: 4,369	Re: Got an issue Weird. Did it sit for a long time or something?

11-02-2009, 12:41 PM	#36 (permalink)
35mastr 2nd Gear Member Join Date: Sep 2009 Location: Newark,Ca. Posts: 566 My Mood:	Re: Got an issue No rode it earlier in the week. Could this be an issue with the stator?? Also how would I check it??

11-02-2009, 12:53 PM	#37 (permalink)
35mastr 2nd Gear Member Join Date: Sep 2009 Location: Newark,Ca. Posts: 566 My Mood:	Re: Got an issue Anyone else got any ideas. Terry can you help me out??

11-02-2009, 01:10 PM	#38 (permalink)
fiveho 2nd Gear Member Join Date: Jan 2006 Location: indiana,pa Posts: 910	Re: Got an issue pop the flywheel off and clean it up and check for any foreign debris floating around your stator

11-02-2009, 01:59 PM	#39 (permalink)
35mastr 2nd Gear Member Join Date: Sep 2009 Location: Newark,Ca. Posts: 566 My Mood:	Re: Got an issue This motor is clean and has not been in the mud. I have the side cover off and there is nothing in there beside the parts that belong in there.

11-02-2009, 04:08 PM	#40 (permalink)
35mastr 2nd Gear Member Join Date: Sep 2009 Location: Newark,Ca. Posts: 566 My Mood:	Re: Got an issue Just came in from the shop and I am still stumped on this one.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)