| | shmalphy 06-11-2009 06:41 PM
I found a way to fix broke plastic when glue is not strong enough. You drill holes in each side of the plastic and stitch it up with wire. You can add glue if you need to make it stronger. It worked on my fender and my visor.http://i650.photobucket.com/albums/uu222/shmalphy/SANY0045.jpg... 8 Comments shmalphy 06-05-2009 11:34 PM
When one of your plastics breaks, you can drill holes along each side of the broken edge. Then use wire to stich the plastic together. Go over the whole thing with epoxy and you have a sturdy repair that looks like hell, but your pockets are as full as before your bike broke. 2 Comments chasetheface123 05-21-2009 07:24 PM
If you ever want to de anodize anything, their are many ways to do it. The easiest it go pick up some "Greased Lightning" cleaner at lowes though. Just soak the part in it and the anodizing comes right off. Let it sit for a while, then wipe it right off. You have to wash the part with water after... Z50King 05-20-2009 11:04 PM
For use with manual clutch. Use this mod to bumpstart your klx/drz 110 while it is in gear!
Note, i have the ignition cover off the engine in these pictures. there is no need to remove the ignition cover
Tools Needed:
8 mm T-handle
electric tape
electric fitting (sitting atop tape)
#2... 30 Comments | |
