Planet Minis

Zachmotox179 · 10-22-2009, 08:15 PM

I have a custom, one of 3 ever made, BBR perimeter 70 frames. This one is gloss black. Just trying to see the interest in this, thinking about selling it. Frame is absolutely gorgeous. not pictured with shock nor exhaust mounted due to them being shipped to me at the moment.

alrighty guys im strapped for cash, $900 firm for frame, subframe, swingarm, gas tank, and foot peg mounts. Would need exhaust and shock to complete!BUY TODAY!!

Zachlubinski@me.com

crfrider2 · 10-22-2009, 08:16 PM

Pow

Zachmotox179 · 10-22-2009, 08:23 PM

would be the ultimate vegas bike!

Zachmotox179 · 10-22-2009, 08:24 PM

Quote:

Originally Posted by crfrider2

Pow

...?

Brach19 · 10-22-2009, 09:10 PM

do you have any pictures with plastics mounted?

USERNAME · 10-22-2009, 09:21 PM

I am interested for sure!!! Is the rake angle fixed or is it like the billetware frames?

What rear wheel would I run with that brake setup then the bbr wheel?

No partial trade for a reeg frame, shock, swingarm setup?

Big Daddy P · 10-22-2009, 10:08 PM

I would like to see it in complete form...

Zachmotox179 · 10-22-2009, 10:46 PM

As in complete with shock and exhaust? or like fully built?. a bbr crfrear brake system and hub would need to be laced to a 12 or 10" wheel. This uses midsize forks such as the marzocchi's i have being sent to me but would need to use a crf50 stem. I have a picture of one of the other 3 fully built so you guys can see what they look like full.

Zachmotox179 · 10-22-2009, 10:47 PM

Quote:

Originally Posted by USERNAME

I am interested for sure!!! Is the rake angle fixed or is it like the billetware frames?

What rear wheel would I run with that brake setup then the bbr wheel?

No partial trade for a reeg frame, shock, swingarm setup?

same rake angle as a bbr perimeter 50 frame and no i cant take any trades. need to buy my new camera!

USERNAME · 10-23-2009, 03:11 PM

So its not raked out like billetware frames are then correct? Also so you need a 110 zoch front end with a 50 stem pressed in or a set of 50 zoch clamps with stem. I assume they used a 50 size headtube on the frame hence needing the 50 stem.

i am interested for sure but would not have the cash for a couple of weeks so let me know when you get all of the rest of the parts and send me some pics of everything.

Zachmotox179 · 10-23-2009, 03:39 PM

yea reeg makes 70 clamps but you could also just use a crf50 stem pressed into 110 clamps. I will post up pics when everything else comes in. I do need this stuff gone asap though.

Zachmotox179 · 10-25-2009, 09:04 AM

Ttt

chasetheface123 · 10-25-2009, 11:07 AM

You could get tristar clamps also, they can make you anytihing, call up pax and he can get them for you.

Zachmotox179 · 10-25-2009, 03:35 PM

Quote:

Originally Posted by chasetheface123

You could get tristar clamps also, they can make you anytihing, call up pax and he can get them for you.

Thanks for the info! I completely forgot about tri-star!

Zachmotox179 · 10-26-2009, 03:28 PM

Bump

Zachmotox179 · 10-26-2009, 06:00 PM

Throw out some realistic offers people!!

LongMooie · 10-27-2009, 12:59 AM

Who made the subframe? its a bbr frame for a 50 but with a subframe fabed up for a 70?

Zachmotox179 · 10-27-2009, 09:17 AM

Quote:

Originally Posted by LongMooie

Who made the subframe? its a bbr frame for a 50 but with a subframe fabed up for a 70?

a few other mods to it as well.

slowracer · 10-27-2009, 12:46 PM

Quote:

Originally Posted by USERNAME

I am interested for sure!!! Is the rake angle fixed or is it like the billetware frames?

What rear wheel would I run with that brake setup then the bbr wheel?

No partial trade for a reeg frame, shock, swingarm setup?

It is a BBR 50 frame with a custom subframe to mount 70 plastics and longer swingarm.
It doesn't have tha 70 size or geometry
You can run any 50 rear wheel or aftermarket wheel/brake kit

Zachmotox179 · 10-28-2009, 08:11 AM

Ttt

10-22-2009, 08:15 PM	#1 (permalink)
Zachmotox179 3rd Gear Member Join Date: Jan 2007 Location: NH 03051 Posts: 3,073	BBR Perimeter Crf70 I have a custom, one of 3 ever made, BBR perimeter 70 frames. This one is gloss black. Just trying to see the interest in this, thinking about selling it. Frame is absolutely gorgeous. not pictured with shock nor exhaust mounted due to them being shipped to me at the moment. alrighty guys im strapped for cash, $900 firm for frame, subframe, swingarm, gas tank, and foot peg mounts. Would need exhaust and shock to complete!BUY TODAY!! Zachlubinski@me.com Last edited by Zachmotox179; 11-03-2009 at 09:03 AM.

10-22-2009, 08:16 PM	#2 (permalink)
crfrider2 2nd Gear Member Join Date: Nov 2006 Location: new york Posts: 283 My Mood:	Re: BBR Perimeter Crf70 Pow

10-22-2009, 08:23 PM	#3 (permalink)
Zachmotox179 3rd Gear Member Join Date: Jan 2007 Location: NH 03051 Posts: 3,073	Re: BBR Perimeter Crf70 would be the ultimate vegas bike!

10-22-2009, 09:10 PM	#5 (permalink)
Brach19 1st Gear Member Join Date: Aug 2007 Location: rosamond, CA Posts: 120	Re: BBR Perimeter Crf70 do you have any pictures with plastics mounted?

10-22-2009, 09:21 PM	#6 (permalink)
USERNAME 2nd Gear Member Join Date: Jul 2006 Location: Monee, IL. Posts: 983	Re: BBR Perimeter Crf70 I am interested for sure!!! Is the rake angle fixed or is it like the billetware frames? What rear wheel would I run with that brake setup then the bbr wheel? No partial trade for a reeg frame, shock, swingarm setup?

10-22-2009, 10:08 PM	#7 (permalink)
Big Daddy P 2nd Gear Member Join Date: Dec 2008 Location: San Juan Capistrano, Ca Posts: 448 My Mood:	Re: BBR Perimeter Crf70 I would like to see it in complete form...

10-22-2009, 10:46 PM	#8 (permalink)
Zachmotox179 3rd Gear Member Join Date: Jan 2007 Location: NH 03051 Posts: 3,073	Re: BBR Perimeter Crf70 As in complete with shock and exhaust? or like fully built?. a bbr crfrear brake system and hub would need to be laced to a 12 or 10" wheel. This uses midsize forks such as the marzocchi's i have being sent to me but would need to use a crf50 stem. I have a picture of one of the other 3 fully built so you guys can see what they look like full.

10-23-2009, 03:11 PM	#10 (permalink)
USERNAME 2nd Gear Member Join Date: Jul 2006 Location: Monee, IL. Posts: 983	Re: BBR Perimeter Crf70 So its not raked out like billetware frames are then correct? Also so you need a 110 zoch front end with a 50 stem pressed in or a set of 50 zoch clamps with stem. I assume they used a 50 size headtube on the frame hence needing the 50 stem. i am interested for sure but would not have the cash for a couple of weeks so let me know when you get all of the rest of the parts and send me some pics of everything.

10-23-2009, 03:39 PM	#11 (permalink)
Zachmotox179 3rd Gear Member Join Date: Jan 2007 Location: NH 03051 Posts: 3,073	Re: BBR Perimeter Crf70 yea reeg makes 70 clamps but you could also just use a crf50 stem pressed into 110 clamps. I will post up pics when everything else comes in. I do need this stuff gone asap though.

10-25-2009, 09:04 AM	#12 (permalink)
Zachmotox179 3rd Gear Member Join Date: Jan 2007 Location: NH 03051 Posts: 3,073	Re: BBR Perimeter Crf70 Ttt

10-25-2009, 11:07 AM	#13 (permalink)
chasetheface123 Chuck Norris for president! Join Date: Nov 2007 Location: Boyne City Michigan Posts: 4,817 My Mood:	Re: BBR Perimeter Crf70 You could get tristar clamps also, they can make you anytihing, call up pax and he can get them for you.

10-26-2009, 03:28 PM	#15 (permalink)
Zachmotox179 3rd Gear Member Join Date: Jan 2007 Location: NH 03051 Posts: 3,073	Re: BBR Perimeter Crf70 Bump

10-26-2009, 06:00 PM	#16 (permalink)
Zachmotox179 3rd Gear Member Join Date: Jan 2007 Location: NH 03051 Posts: 3,073	Re: BBR Perimeter Crf70 Throw out some realistic offers people!!

10-27-2009, 12:59 AM	#17 (permalink)
LongMooie 3rd Gear Member Join Date: Jun 2005 Location: originaly UK! now Central valley, Cali Posts: 1,114 My Mood:	Re: BBR Perimeter Crf70 Who made the subframe? its a bbr frame for a 50 but with a subframe fabed up for a 70?

10-28-2009, 08:11 AM	#20 (permalink)
Zachmotox179 3rd Gear Member Join Date: Jan 2007 Location: NH 03051 Posts: 3,073	Re: BBR Perimeter Crf70 Ttt

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)