Planet Minis

moosehunter · 06-17-2009, 12:10 PM

For Sale:

The heart and soul from SuMo 1...

Built using a donor from a NEW Honda 2006 bike, this engine is equipped as follows...

- TB 117 stroker kit with newer model, large valved head. Please see TBParts.Com further details on this complete kit.
- Takegawa Special clutch (Included are all the misc. extra parts and support pieces)
- Takegawa JDM stator cover.
- Red Baron Extra HD engine studs.
- AHP styled 4 speed trans. (1D, 3U and has NEVER skipped a beat!)
- Baja Designs Stator (Already set up for lights!!, no neutral switch)
- 17 Tooth C-Shaft sprocket from Dragon Racing.
- Bottom end case boring and trans set up by Jeff at MiniGunz.
- VERY well maintained!! (I changed oil so much, I put 3 OPEC kids through school!!)

Also included:

- Kitaco Kick Starter to get the fire lit.
- CHP Aluminum Shift Lever.
- Takegawa Clutch Cable.
- Throttle cable shown is NOT included.

To say this engine is strong is an understatement!! It was built right and treated VERY well! This has been a street engine all of it's life and has never been exposed to the harshness of dirt!

The only possible flaws would be it's a bit under carbed. If I were to keep it, I would upgrade the carb to the next size up (28mm ?) or to a big Yosh carb set up.

PRICING: Complete as pictured/Listed: $1100 (Plus actual shipping)

Note: The original 26mm Mikuni carb and rubber adapter was accidentally damaged during prep work prior to the sale. PLEASE don't ask how as I really feel like a BIG TIME bonehead!! Rest assured, NO damage was sustained by the engine itself. Only the carb, my knee and my ego took the hit!

I'd be happy to pull a duplicate carb set up and cable off a different engine (and jet it accordingly) for an additional $75.00.

Feel free to ask any questions you may have.... PM me here. Or for a much faster response, email me at kneedragger5150@embarqmail.com

This is a PERFECT set up for the street!! With 17/31 gearing, it hauled me around comfortably at 55 to 60mph. With a top speed of 76.4mph. Ths engine has never been subjected to dyno pulls so the horsepower is unknown. But my "Butt dyno" reads consistantly in the "VERY STRONG" range!!

big pete · 06-17-2009, 12:28 PM

Sweet motor. This guy keeps his stuff minty fresh

moosehunter · 06-17-2009, 01:23 PM

Quote:

Originally Posted by big pete

Sweet motor. This guy keeps his stuff minty fresh

Thanks Pete!! And this engine is no exception to that rule!! Minty fresh and runs strong!!

mikev · 06-17-2009, 01:49 PM

supernes550 · 06-17-2009, 08:12 PM

clean looking motor. if i didn't already have too many motors i would have jumped on this in an instant.

if you sell the motor with out the oil cooler i'd be interested in the setup with lines and thermostat.

26gregory · 06-17-2009, 08:30 PM

shiny

Big Daddy P · 06-17-2009, 09:49 PM

How much for the oil cooler system?

moosehunter · 06-17-2009, 09:57 PM

It seems like there's more interest in the cooler set up rather than the engine...

Just so everyone is on the same page... I may remove the cooler system and sell it by itself. Be advised, with the cooler itself, the custom made lines, fittings and adapters, I've got better than $425.00 into this system...

I have yet to figure out a firm price, but it will be in the $350+ range seeing as it was only used a couple hours and is in "next to new" condition.

To be fair to everyone interested, I have begun a list and will be contacting each of you in order... When/IF that time comes.

Thanks!!!

big pete · 06-17-2009, 10:00 PM

I'll trade you my 124 Superhead

supernes550 · 06-17-2009, 10:06 PM

Quote:

Originally Posted by moosehunter

It seems like there's more interest in the cooler set up rather than the engine...

Just so everyone is on the same page... I may remove the cooler system and sell it by itself. Be advised, with the cooler itself, the custom made lines, fittings and adapters, I've got better than $425.00 into this system...

I have yet to figure out a firm price, but it will be in the $350+ range seeing as it was only used a couple hours and is in "next to new" condition.

To be fair to everyone interested, I have begun a list and will be contacting each of you in order... When/IF that time comes.

Thanks!!!

ready with finger on the trigger. just say when.

moosehunter · 06-17-2009, 11:18 PM

Ad has been revised to reflect a different set up and lower pricing.

moosehunter · 06-18-2009, 10:05 AM

We're cookin' with gas now!!!

moosehunter · 06-18-2009, 10:55 AM

Sold pending funds!!!

Someone's ZB is gonna be VERY happy!!!

JIMMY · 06-18-2009, 11:08 AM

This may have been the quickest motor sale I've ever seen! looks great!

prokaw875 · 06-18-2009, 06:15 PM

Bump on the, "This guy keeps his stuff minty". I was very happy with my Ti-Force and 31 tooth sproket from him! Good luck with everything!

supernes550 · 06-18-2009, 07:30 PM

Quote:

Originally Posted by moosehunter

Sold pending funds!!!

Someone's ZB is gonna be VERY happy!!!

the motor or the cooler?

alright zb owner... speak up. which one of you has something new?

moosehunter · 06-18-2009, 08:01 PM

Quote:

Originally Posted by supernes550

the motor or the cooler?

alright zb owner... speak up. which one of you has something new?

Okay... I can't take it any longer... It was bought by

!!

EddieNewYork · 06-18-2009, 08:33 PM

Quote:

Originally Posted by supernes550

the motor or the cooler?

alright zb owner... speak up. which one of you has something new?

big pete · 06-18-2009, 08:43 PM

Quote:

Originally Posted by EddieNewYork

Great buy

dirttrackin280h · 06-18-2009, 09:18 PM

I'm jealous

Good buy Eddie

06-17-2009, 12:10 PM	#1 (permalink)
moosehunter Super Moderator Join Date: Aug 2005 Location: Cologne, Minnesota Posts: 2,734 My Mood:	F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch and more.. SPF For Sale: The heart and soul from SuMo 1... Built using a donor from a NEW Honda 2006 bike, this engine is equipped as follows... - TB 117 stroker kit with newer model, large valved head. Please see TBParts.Com further details on this complete kit. - Takegawa Special clutch (Included are all the misc. extra parts and support pieces) - Takegawa JDM stator cover. - Red Baron Extra HD engine studs. - AHP styled 4 speed trans. (1D, 3U and has NEVER skipped a beat!) - Baja Designs Stator (Already set up for lights!!, no neutral switch) - 17 Tooth C-Shaft sprocket from Dragon Racing. - Bottom end case boring and trans set up by Jeff at MiniGunz. - VERY well maintained!! (I changed oil so much, I put 3 OPEC kids through school!!) Also included: - Kitaco Kick Starter to get the fire lit. - CHP Aluminum Shift Lever. - Takegawa Clutch Cable. - Throttle cable shown is NOT included. To say this engine is strong is an understatement!! It was built right and treated VERY well! This has been a street engine all of it's life and has never been exposed to the harshness of dirt! The only possible flaws would be it's a bit under carbed. If I were to keep it, I would upgrade the carb to the next size up (28mm ?) or to a big Yosh carb set up. PRICING: Complete as pictured/Listed: $1100 (Plus actual shipping) Note: The original 26mm Mikuni carb and rubber adapter was accidentally damaged during prep work prior to the sale. PLEASE don't ask how as I really feel like a BIG TIME bonehead!! Rest assured, NO damage was sustained by the engine itself. Only the carb, my knee and my ego took the hit! I'd be happy to pull a duplicate carb set up and cable off a different engine (and jet it accordingly) for an additional $75.00. Feel free to ask any questions you may have.... PM me here. Or for a much faster response, email me at kneedragger5150@embarqmail.com This is a PERFECT set up for the street!! With 17/31 gearing, it hauled me around comfortably at 55 to 60mph. With a top speed of 76.4mph. Ths engine has never been subjected to dyno pulls so the horsepower is unknown. But my "Butt dyno" reads consistantly in the "VERY STRONG" range!! __________________ Moosehunter (aka: Dan) "When in doubt.... GAS IT!" Last edited by moosehunter; 06-18-2009 at 10:56 AM.

06-17-2009, 12:28 PM	#2 (permalink)
big pete 2nd Gear Member Join Date: Apr 2008 Location: Norcal Posts: 866	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch, Oil Cooler and more... Sweet motor. This guy keeps his stuff minty fresh

06-17-2009, 01:49 PM	#4 (permalink)
mikev 2nd Gear Member Join Date: Nov 2005 Location: Livermore, CA Posts: 614	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch, Oil Cooler and more...

06-17-2009, 08:12 PM	#5 (permalink)
supernes550 The Golden Ticket Join Date: May 2006 Location: 5outh 5an 0iego Posts: 3,616 My Mood:	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch, Oil Cooler and more... clean looking motor. if i didn't already have too many motors i would have jumped on this in an instant. if you sell the motor with out the oil cooler i'd be interested in the setup with lines and thermostat.

06-17-2009, 08:30 PM	#6 (permalink)
26gregory 2nd Gear Member Join Date: Nov 2008 Location: Canton oh Posts: 283	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch, Oil Cooler and more... shiny

06-17-2009, 09:49 PM	#7 (permalink)
Big Daddy P 2nd Gear Member Join Date: Dec 2008 Location: San Juan Capistrano, Ca Posts: 448 My Mood:	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch, Oil Cooler and more... How much for the oil cooler system?

06-17-2009, 09:57 PM	#8 (permalink)
moosehunter Super Moderator Join Date: Aug 2005 Location: Cologne, Minnesota Posts: 2,734 My Mood:	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch, Oil Cooler and more... It seems like there's more interest in the cooler set up rather than the engine... Just so everyone is on the same page... I may remove the cooler system and sell it by itself. Be advised, with the cooler itself, the custom made lines, fittings and adapters, I've got better than $425.00 into this system... I have yet to figure out a firm price, but it will be in the $350+ range seeing as it was only used a couple hours and is in "next to new" condition. To be fair to everyone interested, I have begun a list and will be contacting each of you in order... When/IF that time comes. Thanks!!! __________________ Moosehunter (aka: Dan) "When in doubt.... GAS IT!"

06-17-2009, 10:00 PM	#9 (permalink)
big pete 2nd Gear Member Join Date: Apr 2008 Location: Norcal Posts: 866	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch, Oil Cooler and more... I'll trade you my 124 Superhead

06-17-2009, 11:18 PM	#11 (permalink)
moosehunter Super Moderator Join Date: Aug 2005 Location: Cologne, Minnesota Posts: 2,734 My Mood:	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch and more.. Ad has been revised to reflect a different set up and lower pricing. __________________ Moosehunter (aka: Dan) "When in doubt.... GAS IT!"

06-18-2009, 10:05 AM	#12 (permalink)
moosehunter Super Moderator Join Date: Aug 2005 Location: Cologne, Minnesota Posts: 2,734 My Mood:	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch and more.. REDUCED PRICE We're cookin' with gas now!!! __________________ Moosehunter (aka: Dan) "When in doubt.... GAS IT!"

06-18-2009, 10:55 AM	#13 (permalink)
moosehunter Super Moderator Join Date: Aug 2005 Location: Cologne, Minnesota Posts: 2,734 My Mood:	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch and more.. REDUCED PRICE Sold pending funds!!! Someone's ZB is gonna be VERY happy!!! __________________ Moosehunter (aka: Dan) "When in doubt.... GAS IT!"

06-18-2009, 11:08 AM	#14 (permalink)
JIMMY 2nd Gear Member Join Date: Jun 2004 Location: temecula ca Posts: 572 My Mood:	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch and more.. SPF This may have been the quickest motor sale I've ever seen! looks great!

06-18-2009, 06:15 PM	#15 (permalink)
prokaw875 2nd Gear Member Join Date: Apr 2009 Location: Vernon, Connecticut Posts: 471 My Mood:	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch and more.. SPF Bump on the, "This guy keeps his stuff minty". I was very happy with my Ti-Force and 31 tooth sproket from him! Good luck with everything!

06-18-2009, 09:18 PM	#20 (permalink)
dirttrackin280h 3rd Gear Member Join Date: Aug 2006 Location: Oakley, California Posts: 1,008	Re: F/S: TB117 Engine from SuMo 1, 4spd., Tak Clutch and more.. SPF I'm jealous Good buy Eddie

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)