Planet Minis

yzf_nick56 · 02-23-2007, 02:06 PM

Now listed on ebay: http://cgi.ebay.com/ebaymotors/ws/eB...3065263&rd=1,1

Ok guys, I'm building my Kitaco 124SE and am going with the Kitaco clutch/trans setup and dont know if I should put this kit back on my 108cc motor or not. I bought it new from Powersportsstore less then a month ago and it literally has less than 2 hours ride time on it. This kit works great and really lets the motor rev faster since all the weight is off the crank. Its the kit that is used with the stock trans parts so no case splitting is required. I paid $580+ for it and its literally almost new yet so I was hoping to get close to $500 for it or else I'll just keep it. Email (yzf_nick56@yahoo.com) or post on here any questions. Thanks guys.

the only think not pictured but included is the oil filter and clutch cable.

Motarded · 02-23-2007, 02:40 PM

Considering any trading?

yzf_nick56 · 02-23-2007, 03:01 PM

Quote:

Originally Posted by Motarded

Considering any trading?

what ya got in mind? I'm currently building a 124SE and need a few stock parts to finish it up but I might consider some other stuff. I would also consider a Yosh pipe + some $$$ if you would happen to have one.

Motarded · 02-23-2007, 03:02 PM

E mail me at lowkow@aol.com lets try to work something out.

Crashkid · 02-23-2007, 03:40 PM

If you don't work anything out with motarded, look me up. I have a lot of stock parts off a 04 crf50, I am looking to upgrade my clutch.

yzf_nick56 · 02-23-2007, 06:57 PM

bump

yzf_nick56 · 02-24-2007, 05:22 AM

aparently nobody wants an awesome affordable clutch?

yzf_nick56 · 02-24-2007, 04:58 PM

bump....

calvinmx48 · 02-25-2007, 01:37 PM

with the kit do you keep the stock gear ratio?

yamaha · 02-25-2007, 01:40 PM

pm me.

aedwards07 · 02-25-2007, 02:00 PM

Ill vouch for how much time it has on it.I bet that thing doesnt even have an hour on it.

yzf_nick56 · 02-25-2007, 02:20 PM

Quote:

Originally Posted by calvinmx48

with the kit do you keep the stock gear ratio?

Honestly I dont know for sure if it changes the ratio or not. I looked around and did some research and couldnt find a definate answer.

Either way, this lets the motor rev a ton faster over stock or the econo-clutch setups.

yzf_nick56 · 02-27-2007, 06:07 PM

Quote:

Originally Posted by aedwards07

Ill vouch for how much time it has on it.I bet that thing doesnt even have an hour on it.

Is this not a good price for a practically new clutch?

SLOWPOKE · 02-27-2007, 09:08 PM

trying to come up with the money. PM me your best price.

Z · 02-27-2007, 09:16 PM

Ratio - Count how many teeth are on the gear that slips over crank, and count how many teeth are on the clutch basket and report the results and I'll tell you the ratio.

How did you manage to scratch the case with 1 hour or ride time?

chase775 · 02-28-2007, 01:25 PM

How did you manage to scratch the case with 1 hour or ride time?
haha this is what i was just thinkin

yzf_nick56 · 02-28-2007, 01:43 PM

Quote:

Originally Posted by z88R

How did you manage to scratch the case with 1 hour or ride time?

it was from trying to mount my AHP over the top brake pedal on the bike. I saw that scratch and took it off immediately. I could actually even try to get that to buff out if its really a deal-breaker for somebody.

yzf_nick56 · 03-02-2007, 06:19 PM

1 day left on ebay auction............

yzf_nick56 · 03-04-2007, 05:52 AM

no bids on the ebay auction so I re-listed it and put the new link up.

02-23-2007, 02:06 PM	#1 (permalink)
yzf_nick56 3rd Gear Member Join Date: Mar 2004 Location: Lewisburg PA Posts: 1,196	FS Feeler: Takegawa Special Clutch kit - CRF50 Now listed on ebay: http://cgi.ebay.com/ebaymotors/ws/eB...3065263&rd=1,1 Ok guys, I'm building my Kitaco 124SE and am going with the Kitaco clutch/trans setup and dont know if I should put this kit back on my 108cc motor or not. I bought it new from Powersportsstore less then a month ago and it literally has less than 2 hours ride time on it. This kit works great and really lets the motor rev faster since all the weight is off the crank. Its the kit that is used with the stock trans parts so no case splitting is required. I paid $580+ for it and its literally almost new yet so I was hoping to get close to $500 for it or else I'll just keep it. Email (yzf_nick56@yahoo.com) or post on here any questions. Thanks guys. the only think not pictured but included is the oil filter and clutch cable. Last edited by yzf_nick56; 03-04-2007 at 05:51 AM.

02-25-2007, 01:37 PM	#9 (permalink)
calvinmx48 1st Gear Member Join Date: May 2006 Location: ontario canada Posts: 116	stock with the kit do you keep the stock gear ratio?

02-23-2007, 02:40 PM	#2 (permalink)
Motarded 3rd Gear Member Join Date: Aug 2004 Location: RIVERCIDE SO CAL 951 Posts: 4,977	Considering any trading?

02-23-2007, 03:02 PM	#4 (permalink)
Motarded 3rd Gear Member Join Date: Aug 2004 Location: RIVERCIDE SO CAL 951 Posts: 4,977	E mail me at lowkow@aol.com lets try to work something out.

02-23-2007, 03:40 PM	#5 (permalink)
Crashkid 3rd Gear Member Join Date: Dec 2005 Location: Warren, Ohio Posts: 1,096	If you don't work anything out with motarded, look me up. I have a lot of stock parts off a 04 crf50, I am looking to upgrade my clutch.

02-23-2007, 06:57 PM	#6 (permalink)
yzf_nick56 3rd Gear Member Join Date: Mar 2004 Location: Lewisburg PA Posts: 1,196	bump

02-24-2007, 05:22 AM	#7 (permalink)
yzf_nick56 3rd Gear Member Join Date: Mar 2004 Location: Lewisburg PA Posts: 1,196	aparently nobody wants an awesome affordable clutch?

02-24-2007, 04:58 PM	#8 (permalink)
yzf_nick56 3rd Gear Member Join Date: Mar 2004 Location: Lewisburg PA Posts: 1,196	bump....

02-25-2007, 01:40 PM	#10 (permalink)
yamaha 3rd Gear Member Join Date: Jul 2006 Location: locust grove, va Posts: 2,056	pm me.

02-25-2007, 02:00 PM	#11 (permalink)
aedwards07 3rd Gear Member Join Date: Jan 2004 Location: Kissimmee,FL Posts: 5,888	Ill vouch for how much time it has on it.I bet that thing doesnt even have an hour on it.

02-27-2007, 09:08 PM	#14 (permalink)
SLOWPOKE 2nd Gear Member Join Date: Feb 2007 Location: Riverside, Rhode Island Posts: 616 My Mood:	trying to come up with the money. PM me your best price.

02-27-2007, 09:16 PM	#15 (permalink)
Z 5th Gear Member Join Date: Sep 2003 Location: KANSAS Posts: 8,791	Ratio - Count how many teeth are on the gear that slips over crank, and count how many teeth are on the clutch basket and report the results and I'll tell you the ratio. How did you manage to scratch the case with 1 hour or ride time?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

02-28-2007, 01:25 PM	#16 (permalink)
chase775 3rd Gear Member Join Date: May 2006 Location: minot,ND Posts: 1,212	How did you manage to scratch the case with 1 hour or ride time? haha this is what i was just thinkin

03-02-2007, 06:19 PM	#18 (permalink)
yzf_nick56 3rd Gear Member Join Date: Mar 2004 Location: Lewisburg PA Posts: 1,196	1 day left on ebay auction............

03-04-2007, 05:52 AM	#19 (permalink)
yzf_nick56 3rd Gear Member Join Date: Mar 2004 Location: Lewisburg PA Posts: 1,196	no bids on the ebay auction so I re-listed it and put the new link up.