Planet Minis

Roosey2 · 05-26-2006, 10:27 AM

I have a 1985 Z50 that will run with a brand new spark plug in it but it ends up makeing the spark plug have eradical spark and the bike wont start unless i get a new plug, ive played around with the jets and also cleaned the carb but nothing seams to work please help

theeechozen1 · 05-26-2006, 11:46 AM

coil maybe?
you can find a new one at hondatrailbikes.com

racerx351 · 05-26-2006, 11:56 AM

ck grounds !!!

dirtbkr188 · 05-26-2006, 06:38 PM

Make sure you have a good connection with the spark plug boot and the plug wire. Sometimes, the strands break, and taking the boot on and off the plug may cause intermittent spark. You can carefully cut the insulation back 1/4" all the way around, then twist the insulation off, and fan out the wire strands. Then, re-thread your plug boot back on.

Roosey2 · 06-08-2006, 08:07 PM

I think that I have pin poinnted the problem and it was I had the wrong spark plug in it I had a CR6HSA in it but then i got a CR6HS and it seems to work fine

05-26-2006, 10:27 AM	#1 (permalink)
Roosey2 PM Newbie Join Date: Apr 2006 Location: Glencoe Posts: 11	1985 Honda z50 runs sometimes I have a 1985 Z50 that will run with a brand new spark plug in it but it ends up makeing the spark plug have eradical spark and the bike wont start unless i get a new plug, ive played around with the jets and also cleaned the carb but nothing seams to work please help

05-26-2006, 11:46 AM	#2 (permalink)
theeechozen1 1st Gear Member Join Date: Aug 2005 Location: SOUTHERN LAND OF HOES & POKER Posts: 143	coil maybe? you can find a new one at hondatrailbikes.com

05-26-2006, 11:56 AM	#3 (permalink)
racerx351 3rd Gear Member Join Date: Nov 2005 Posts: 2,774	ck grounds !!!

05-26-2006, 06:38 PM	#4 (permalink)
dirtbkr188 3rd Gear Member Join Date: May 2004 Location: New Jersey Posts: 2,972	Make sure you have a good connection with the spark plug boot and the plug wire. Sometimes, the strands break, and taking the boot on and off the plug may cause intermittent spark. You can carefully cut the insulation back 1/4" all the way around, then twist the insulation off, and fan out the wire strands. Then, re-thread your plug boot back on.

06-08-2006, 08:07 PM	#5 (permalink)
Roosey2 PM Newbie Join Date: Apr 2006 Location: Glencoe Posts: 11	I think that I have pin poinnted the problem and it was I had the wrong spark plug in it I had a CR6HSA in it but then i got a CR6HS and it seems to work fine

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)