Planet Minis

Radboy · 12-14-2006, 02:08 PM

Getting a 69' hard tail and want to do something cool.. looking for cool exhaust for it.. can find all types of other stuff but not a cool exhaust Thanks

arlindsay1992 · 12-14-2006, 02:43 PM

Beatrice Cycle has this downswept exhaust. I like the look of it. It won't work with a foot brake though.

http://dragonracingparts.com/cobra.html

Fullthrottle · 12-14-2006, 06:58 PM

-two brothers racing is NO LONGER AVAILABLE

-minigunz will be available only at the end of feburary

-kitaco looks cool but no ones could says if it fitt...

what's your budjet?
maybe you could go to a local guys who works fine metal...

Hardtail · 12-14-2006, 07:13 PM

$255 but real nice

http://dratv.com/rlcoexctorz5.html

I think its what I'm getting for my hardtail?

Z · 12-14-2006, 08:26 PM

Besides the minigunz, I'd run this one. See attached.

millbillyfiddy · 12-14-2006, 09:42 PM

That bike is sick^^^^^^^^^^^

Hardtail · 12-15-2006, 09:40 AM

Love that under the seat exhaust

Is that available? or a custom job Dilligaf?

My next project is going to be a lot of custom work. Have come up with a few cool ideas putting this daily rider together.

--X-- · 12-15-2006, 10:37 AM

Quote:

Originally Posted by Dilligaf

G'Day,

COOL PARTS = fabricate your own!

Nice rims... what kind are they? Is the frame nickel plated, chrome, or just paint? I like the thought of nickel plating one of my K0 frames.

Any worries about heat issues with that exhaust? Looks like it might burn the seat, unless there is a heat shield that I can't see.

~E · 12-15-2006, 08:27 PM

I love aluminum fabrication, but that weld is awful. Looks like steel. Maybe it is an attempt at 'smooth welding' but I am just not into it.

... this is a weld on my beach cruiser I just put together... and what I feel a good looking aluminum weld should be:

Hardtail · 12-15-2006, 09:44 PM

Quote:

Originally Posted by Dutch

Is the frame nickel plated, chrome, or just paint? I like the thought of nickel plating one of my K0 frames.

Did you see that episode of American Chopper recently too?

Where they nickel-plated everything on an oldskool build?

Nickel does look sweet

minirdr · 12-15-2006, 09:59 PM

Quote:

Originally Posted by Dilligaf

G'Day,

ALLOY frame (Belgium)..... see pics below.....

use a 2-3mm stainless steel heatshield... no seat burning.....

i am in love w/ that bike.

--X-- · 12-15-2006, 10:31 PM

Quote:

Originally Posted by Hardtail

Did you see that episode of American Chopper recently too?

Where they nickel-plated everything on an oldskool build?

Nickel does look sweet

No I didn't. I just like the idea, I guess because I used to be into old school bmx bikes and the really old ones where often nickel plated instead of chrome.

sandrider · 12-15-2006, 11:35 PM

i will still wait for the Minigunz exhaust in feb. they are clean and they in the stock position , stainless steel head pipe and chrome muffler assy. $225.00ready to bolt on and i have one prototype on the sample bike i loaned them. rocking the world. i have two bikes waiting for that new pipe and i will be happy to wait, thanks

SprNtrl · 12-16-2006, 11:14 AM

Quote:

Originally Posted by Dilligaf

G'Day,

MINNIGUNZ uses stainless steel now? asked them a long time ago.... only chromed steel.... we do not work with stainless steel was the answer.

I second Dilligaf's concern. I thought their pipes were purely chromed steel.

~E · 12-16-2006, 11:22 AM

Minigunz uses chromed steel, not stainless.

SkinDonor · 12-16-2006, 07:58 PM

I have the R&L exhuast on my K2 it performs great and sounds very nice but it is not a bolt on ready I had to cut and turn my header flange and reweld it to fit and the exhuast tip will require a bracket too. I have a 124cc stroker motor with a Kitaco SE crank and a TB HC piston with alot of other stuff done pretty fast for a hard tail on eights I need some tens.

I'm going to be buying a Minigunz once I can get one from Jeff. then I will put a 88cc in her to make it more rider friendly.

fatcaaat · 12-16-2006, 08:06 PM

Go to www.winmc.com and look at all the exhausts on that site. You'll find something you'll like I am sure.

12-14-2006, 02:08 PM	#1 (permalink)
Radboy PM Newbie Join Date: Sep 2005 Location: Rockford IL. Posts: 38	69' Hard Tail exhaust Getting a 69' hard tail and want to do something cool.. looking for cool exhaust for it.. can find all types of other stuff but not a cool exhaust Thanks Last edited by Radboy; 12-14-2006 at 02:10 PM.

12-14-2006, 08:26 PM	#5 (permalink)
Z 5th Gear Member Join Date: Sep 2003 Location: KANSAS Posts: 8,539	Besides the minigunz, I'd run this one. See attached. Attached Thumbnails

12-15-2006, 08:27 PM	#9 (permalink)
~E perpetratin' Join Date: Nov 2003 Location: San Juan Capo, CA Posts: 1,973	I love aluminum fabrication, but that weld is awful. Looks like steel. Maybe it is an attempt at 'smooth welding' but I am just not into it. ... this is a weld on my beach cruiser I just put together... and what I feel a good looking aluminum weld should be: Last edited by ~E; 12-15-2006 at 08:52 PM.

12-14-2006, 02:43 PM	#2 (permalink)
arlindsay1992 "High Speed Record Guy" Join Date: Mar 2006 Location: Northern Virginia Posts: 4,369	Beatrice Cycle has this downswept exhaust. I like the look of it. It won't work with a foot brake though. http://dragonracingparts.com/cobra.html

12-14-2006, 06:58 PM	#3 (permalink)
Fullthrottle 2nd Gear Member Join Date: Aug 2005 Location: Montréal, Québec, Canada Posts: 424	-two brothers racing is NO LONGER AVAILABLE -minigunz will be available only at the end of feburary -kitaco looks cool but no ones could says if it fitt... what's your budjet? maybe you could go to a local guys who works fine metal...

12-14-2006, 07:13 PM	#4 (permalink)
Hardtail PM Newbie Join Date: Dec 2006 Location: Orygun Posts: 19	$255 but real nice http://dratv.com/rlcoexctorz5.html I think its what I'm getting for my hardtail?

12-14-2006, 09:42 PM	#6 (permalink)
millbillyfiddy 3rd Gear Member Join Date: Dec 2003 Location: Cape Cod Mass Posts: 2,372 My Mood:	That bike is sick^^^^^^^^^^^

12-15-2006, 09:40 AM	#7 (permalink)
Hardtail PM Newbie Join Date: Dec 2006 Location: Orygun Posts: 19	Love that under the seat exhaust Is that available? or a custom job Dilligaf? My next project is going to be a lot of custom work. Have come up with a few cool ideas putting this daily rider together.

12-15-2006, 11:35 PM	#13 (permalink)
sandrider PM Newbie Join Date: Dec 2005 Location: los angeles Posts: 8	i will still wait for the Minigunz exhaust in feb. they are clean and they in the stock position , stainless steel head pipe and chrome muffler assy. $225.00ready to bolt on and i have one prototype on the sample bike i loaned them. rocking the world. i have two bikes waiting for that new pipe and i will be happy to wait, thanks

12-16-2006, 11:22 AM	#15 (permalink)
~E perpetratin' Join Date: Nov 2003 Location: San Juan Capo, CA Posts: 1,973	Minigunz uses chromed steel, not stainless.

12-16-2006, 07:58 PM	#16 (permalink)
SkinDonor 3rd Gear Member Join Date: Oct 2003 Location: Lake Elsinore CA. Posts: 1,387	I have the R&L exhuast on my K2 it performs great and sounds very nice but it is not a bolt on ready I had to cut and turn my header flange and reweld it to fit and the exhuast tip will require a bracket too. I have a 124cc stroker motor with a Kitaco SE crank and a TB HC piston with alot of other stuff done pretty fast for a hard tail on eights I need some tens. I'm going to be buying a Minigunz once I can get one from Jeff. then I will put a 88cc in her to make it more rider friendly.

12-16-2006, 08:06 PM	#17 (permalink)
fatcaaat 3rd Gear Member Join Date: Sep 2004 Location: Arlington, VA Posts: 3,778	Go to www.winmc.com and look at all the exhausts on that site. You'll find something you'll like I am sure.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)