Planet Minis

yzf_nick56 · 09-06-2008, 02:28 PM

Well, do they? I'm building a 70 and had a Yosh CRF50 pipe in mind and need to know if they fit before I order. Thanks.

makotosun · 09-06-2008, 03:59 PM

I welded up a custom heat shield from the stocker and part of a stock CT70. The only mounting mod was I needed to make a small strap (about 2.5" long to go from the shock bolt to the CRF mounting tab.

Sounds nice and mellow too.

dirttrackin280h · 09-06-2008, 05:30 PM

I fitted my Pro Circuit T-4 Exhaust from my CRF50 onto my CT70 yesterday. All I would need for it to work would be a bracket like makotosun made. Other than that, it looked good.

yzf_nick56 · 09-06-2008, 05:46 PM

OK good, now I can order my yosh system. YAY!!!!

Motarded · 09-06-2008, 06:08 PM

What about crf70 pipes? anybody used one?

dirttrackin280h · 09-06-2008, 06:23 PM

Quote:

Originally Posted by yzf_nick56

OK good, now I can order my yosh system. YAY!!!!

Since the Yosh system is a bit larger than your typical exhaust, you may run into clearance issues with the rear shock.

Motarded- This i would like to know as well. Maybe the CRF70 pipes fit without any bracket needed

yzf_nick56 · 09-06-2008, 07:00 PM

I know that the CRF70 pipes have way more bends then the 50 pipes. They have some bends to tuck inside of the rear subframe that the 50s dont have. The 50 pipes are amuch straighter shot from front to rear.

makotosun · 09-06-2008, 09:46 PM

The CRF50 pipe I used is pretty wide where it passes the shock, unlike the stock exhaust that has an indent built in to go around it. It does sit out a bit, but it is not a problem without a passenger.

If you ride one 2 up much, you may need to do some footpeg relocating or something.

Motarded · 09-06-2008, 09:56 PM

I am so dumb...I have been waiting for my ct to be far enough along to mock up my crf70 pipe to see if it will work...LOL SOOO DUMBB!! I have 3 stock ct's in the garage I can try it on! lol I feel so dumb right now.

yzf_nick56 · 09-07-2008, 06:25 AM

Quote:

Originally Posted by makotosun

The CRF50 pipe I used is pretty wide where it passes the shock, unlike the stock exhaust that has an indent built in to go around it. It does sit out a bit, but it is not a problem without a passenger.

If you ride one 2 up much, you may need to do some footpeg relocating or something.

I dont plan on any passengers so thats not an issue

09-06-2008, 02:28 PM	#1 (permalink)
yzf_nick56 3rd Gear Member Join Date: Mar 2004 Location: Lewisburg PA Posts: 1,183	CRF/XR 50 pipes fit on a CT70?? Well, do they? I'm building a 70 and had a Yosh CRF50 pipe in mind and need to know if they fit before I order. Thanks.

09-06-2008, 03:59 PM	#2 (permalink)
makotosun 2nd Gear Member Join Date: Apr 2005 Location: Washington (southwest) Posts: 510 My Mood:	Re: CRF/XR 50 pipes fit on a CT70?? I welded up a custom heat shield from the stocker and part of a stock CT70. The only mounting mod was I needed to make a small strap (about 2.5" long to go from the shock bolt to the CRF mounting tab. Sounds nice and mellow too.

09-06-2008, 05:30 PM	#3 (permalink)
dirttrackin280h 3rd Gear Member Join Date: Aug 2006 Location: Oakley, California Posts: 1,008	Re: CRF/XR 50 pipes fit on a CT70?? I fitted my Pro Circuit T-4 Exhaust from my CRF50 onto my CT70 yesterday. All I would need for it to work would be a bracket like makotosun made. Other than that, it looked good.

09-06-2008, 05:46 PM	#4 (permalink)
yzf_nick56 3rd Gear Member Join Date: Mar 2004 Location: Lewisburg PA Posts: 1,183	Re: CRF/XR 50 pipes fit on a CT70?? OK good, now I can order my yosh system. YAY!!!!

09-06-2008, 06:08 PM	#5 (permalink)
Motarded 3rd Gear Member Join Date: Aug 2004 Location: RIVERCIDE SO CAL 951 Posts: 4,972	Re: CRF/XR 50 pipes fit on a CT70?? What about crf70 pipes? anybody used one?

09-06-2008, 07:00 PM	#7 (permalink)
yzf_nick56 3rd Gear Member Join Date: Mar 2004 Location: Lewisburg PA Posts: 1,183	Re: CRF/XR 50 pipes fit on a CT70?? I know that the CRF70 pipes have way more bends then the 50 pipes. They have some bends to tuck inside of the rear subframe that the 50s dont have. The 50 pipes are amuch straighter shot from front to rear.

09-06-2008, 09:46 PM	#8 (permalink)
makotosun 2nd Gear Member Join Date: Apr 2005 Location: Washington (southwest) Posts: 510 My Mood:	Re: CRF/XR 50 pipes fit on a CT70?? The CRF50 pipe I used is pretty wide where it passes the shock, unlike the stock exhaust that has an indent built in to go around it. It does sit out a bit, but it is not a problem without a passenger. If you ride one 2 up much, you may need to do some footpeg relocating or something.

09-06-2008, 09:56 PM	#9 (permalink)
Motarded 3rd Gear Member Join Date: Aug 2004 Location: RIVERCIDE SO CAL 951 Posts: 4,972	Re: CRF/XR 50 pipes fit on a CT70?? I am so dumb...I have been waiting for my ct to be far enough along to mock up my crf70 pipe to see if it will work...LOL SOOO DUMBB!! I have 3 stock ct's in the garage I can try it on! lol I feel so dumb right now.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)