Planet Minis

redrider78 · 03-01-2008, 01:17 PM

would i be able to fit a gpx 150 motor into my 1999 z50 and if so would it be alot of mods to make it work or will it just bolt in wit wide footpeg mounts?

patman · 03-01-2008, 04:14 PM

As far as I know you would need wide foot pegs,and you would have to cut the front fender down.Other than that it should bolt right up.I THINK that's it.

firepower354 · 03-01-2008, 06:49 PM

You'll have to tweak or cut & weld a pipe, maybe mess with some intake options, and fill the front tire with cement.

patman · 03-01-2008, 06:53 PM

Oh ya,I forgot about the cement

.Custom exhaust is a given.Minigunz might work though.

Dan_Lorenze · 03-02-2008, 09:50 AM

Quote:

Originally Posted by redrider78

would i be able to fit a gpx 150 motor into my 1999 z50 and if so would it be alot of mods to make it work or will it just bolt in wit wide footpeg mounts?

Where can I find wide footpeg mounts?

Thanks.......

patman · 03-02-2008, 10:16 AM

Dogpile search?

firepower354 · 03-02-2008, 10:26 AM

The gal ain't that wide. I have a stock peg bar on mine.

Dan_Lorenze · 03-02-2008, 12:09 PM

I'm have CT70s, the stock pegs don't work with the YX150/160's, I also need kickstand mounts.

JohnnyB · 03-02-2008, 09:18 PM

Quote:

Originally Posted by Dan_Lorenze

Where can I find wide footpeg mounts?

Thanks.......

Staggs or T-BOLT

Oh ya ..., ya may also want ta run hd springs and at least +1 or even +2 Xr50 lower fork legs .

Dan_Lorenze · 03-03-2008, 09:22 AM

Quote:

Originally Posted by JohnnyB

Staggs or T-BOLT

Oh ya ..., ya may also want ta run hd springs and at least +1 or even +2 Xr50 lower fork legs .

Thanks.... Not running the stock front end..

03-01-2008, 01:17 PM	#1 (permalink)
redrider78 PM Newbie Join Date: Sep 2007 Location: long island,ny Posts: 59	engine?? would i be able to fit a gpx 150 motor into my 1999 z50 and if so would it be alot of mods to make it work or will it just bolt in wit wide footpeg mounts?

03-01-2008, 04:14 PM	#2 (permalink)
patman 3rd Gear Member Join Date: Aug 2006 Location: Minnesota Posts: 2,211	Re: engine?? As far as I know you would need wide foot pegs,and you would have to cut the front fender down.Other than that it should bolt right up.I THINK that's it.

03-01-2008, 06:49 PM	#3 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 10,997 My Mood:	Re: engine?? You'll have to tweak or cut & weld a pipe, maybe mess with some intake options, and fill the front tire with cement. __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories.

03-01-2008, 06:53 PM	#4 (permalink)
patman 3rd Gear Member Join Date: Aug 2006 Location: Minnesota Posts: 2,211	Re: engine?? Oh ya,I forgot about the cement.Custom exhaust is a given.Minigunz might work though.

03-02-2008, 10:16 AM	#6 (permalink)
patman 3rd Gear Member Join Date: Aug 2006 Location: Minnesota Posts: 2,211	Re: engine?? Dogpile search?

03-02-2008, 10:26 AM	#7 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 10,997 My Mood:	Re: engine?? The gal ain't that wide. I have a stock peg bar on mine. __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories.

03-02-2008, 12:09 PM	#8 (permalink)
Dan_Lorenze 2nd Gear Member Join Date: Mar 2006 Location: Moorpark CA Posts: 451	Re: engine?? I'm have CT70s, the stock pegs don't work with the YX150/160's, I also need kickstand mounts.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)