Planet Minis

tepco · 11-29-2009, 10:44 PM

Get an exhaust like this EXHAUST PIPE HONDA XR50 CRF50 XR CRF 50 125CC PIT BIKES:eBay Motors (item 330286210912 end time Dec-07-09 18

25 PST)and cut the header down to fit the Z50R or is the routing too different on the CRF? Its hard to tell how the silencer attaches from the pics and i know someone on here has this very one.

ducatilover · 11-29-2009, 11:53 PM

i have the same pipe for my ct70. The angle is too high for the Z. You could bend the pipe as long as ou dont kink it.

tcr0148 · 11-30-2009, 12:46 AM

a little kink in the bend wont really make a noticable difference in the performance......and being that it's only like $25 you can cut, weld, and fit it to fit without breaking the bank. I'm sure if you were to take it to a muffler shop really early in the morning, the person there would be able to make a few cuts and fit it properly for little next to nothing

thebrandon · 11-30-2009, 01:07 AM

I have a 1985 z50r with a zongshen 124 with that exact exhaust, it bolted right up to my motor which used to have the stock z50r exhaust on it. I don't think you would have any problems except for how long the head pipe is. With that pipe the muffler wont fit unless you cut the head pipe. Then it should fit, might be a tight squeeze but it should still fit.

If you do decide to get that one you can get it from the same seller I got it from for 40 shipped. I got it with in a couple days of ordering it, but I am also only 1 state over from the seller.

MUFFLER PIPE HONDA XR50 CRF50 XR CRF 50 125CC PIT BIKES:eBay Motors (item 380124167026 end time Dec-09-09 19:41:18 PST)

tepco · 11-30-2009, 07:59 AM

Quote:

Originally Posted by thebrandon

I have a 1985 z50r with a zongshen 124 with that exact exhaust, it bolted right up to my motor which used to have the stock z50r exhaust on it. I don't think you would have any problems except for how long the head pipe is. With that pipe the muffler wont fit unless you cut the head pipe. Then it should fit, might be a tight squeeze but it should still fit.

If you do decide to get that one you can get it from the same seller I got it from for 40 shipped. I got it with in a couple days of ordering it, but I am also only 1 state over from the seller.

MUFFLER PIPE HONDA XR50 CRF50 XR CRF 50 125CC PIT BIKES:eBay Motors (item 380124167026 end time Dec-09-09 19:41:18 PST)

I saw that one as well. So i guess the silencer just slides on to the header? What secures it?
I have a friend that works in a muffler shop so minor bends are not a problem.
Do you have a pic of it mounted up to your Zongshen?

firepower354 · 11-30-2009, 08:17 AM

Yup

tepco · 11-30-2009, 08:20 AM

Ah i see, i like the shock protector..That's one way of handling the problem...lol.

thebrandon · 11-30-2009, 10:34 AM

There it is on my bike, I haven't had the time to cut it yet, but with the way the pipe sits on my bike the end up the muffler should be to the inside of the shock and not directly on it.

Also when the muffler slides on to the pipe you need a set screw to hold it in place. My package didn't come with one but I have more extra screws nuts and bolts than I count laying around the place.

firepower354 · 11-30-2009, 12:05 PM

Quote:

Originally Posted by tepco

Ah i see, i like the shock protector..That's one way of handling the problem...lol.

Of hiding the uglyazz streetbike shock needed to hold my wide side up? lol

zeeman · 11-30-2009, 02:55 PM

What intake is that on the Zongshen? I am still looking for one to fit my Lifan 125 on a Z50a. What carb do you run, and do you like it? Zeeman

Bizzel · 11-30-2009, 05:22 PM

"tepco"
Sorry to thread Jack!

Simalar question, My buddy has a stock xr50 exaust that I was thinking about putting on my 96' z50r, would it make any differance and would it fit?

Thanks

Bizzel

Driller · 11-30-2009, 05:29 PM

Not meaning to hijack this.
Is the diameter of the stock header pipe smaller than these?
If the same, can the stock unit be modified to allow better flow?
Smack me if this has been covered before.

Driller

axrginder6 · 12-01-2009, 06:02 AM

heres mine..i think its the same pipe.make it up before u cut it

tepco · 12-01-2009, 07:22 PM

Quote:

Originally Posted by Driller

Not meaning to hijack this.
Is the diameter of the stock header pipe smaller than these?
If the same, can the stock unit be modified to allow better flow?
Smack me if this has been covered before.

Driller

The stock pipe diameter is much smaller then these.

11-29-2009, 10:44 PM	#1 (permalink)
tepco 1st Gear Member Join Date: Dec 2005 Location: Greensboro N.C. Posts: 152	Exhaust, Would it be possible to.. Get an exhaust like this EXHAUST PIPE HONDA XR50 CRF50 XR CRF 50 125CC PIT BIKES:eBay Motors (item 330286210912 end time Dec-07-09 1825 PST)and cut the header down to fit the Z50R or is the routing too different on the CRF? Its hard to tell how the silencer attaches from the pics and i know someone on here has this very one.

11-29-2009, 11:53 PM	#2 (permalink)
ducatilover 2nd Gear Member Join Date: May 2008 Location: Peoria, AZ Posts: 675 My Mood:	Re: Exhaust, Would it be possible to.. i have the same pipe for my ct70. The angle is too high for the Z. You could bend the pipe as long as ou dont kink it.

11-30-2009, 12:46 AM	#3 (permalink)
tcr0148 2nd Gear Member Join Date: Jan 2006 Location: Houston, tx lafayette, la every other wknd Posts: 284	Re: Exhaust, Would it be possible to.. a little kink in the bend wont really make a noticable difference in the performance......and being that it's only like $25 you can cut, weld, and fit it to fit without breaking the bank. I'm sure if you were to take it to a muffler shop really early in the morning, the person there would be able to make a few cuts and fit it properly for little next to nothing

11-30-2009, 01:07 AM	#4 (permalink)
thebrandon PM Newbie Join Date: Nov 2009 Posts: 34	Re: Exhaust, Would it be possible to.. I have a 1985 z50r with a zongshen 124 with that exact exhaust, it bolted right up to my motor which used to have the stock z50r exhaust on it. I don't think you would have any problems except for how long the head pipe is. With that pipe the muffler wont fit unless you cut the head pipe. Then it should fit, might be a tight squeeze but it should still fit. If you do decide to get that one you can get it from the same seller I got it from for 40 shipped. I got it with in a couple days of ordering it, but I am also only 1 state over from the seller. MUFFLER PIPE HONDA XR50 CRF50 XR CRF 50 125CC PIT BIKES:eBay Motors (item 380124167026 end time Dec-09-09 19:41:18 PST)

11-30-2009, 08:17 AM	#6 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 11,858 My Mood:	Re: Exhaust, Would it be possible to.. Yup __________________ If it has my name on it I did it;) FirepowerMinis.com 810-237-9537 M-F 9-6 Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Piranha/Medina/Thumpstar bikes, parts, engines and accessories.

11-30-2009, 08:20 AM	#7 (permalink)
tepco 1st Gear Member Join Date: Dec 2005 Location: Greensboro N.C. Posts: 152	Re: Exhaust, Would it be possible to.. Ah i see, i like the shock protector..That's one way of handling the problem...lol.

11-30-2009, 10:34 AM	#8 (permalink)
thebrandon PM Newbie Join Date: Nov 2009 Posts: 34	Re: Exhaust, Would it be possible to.. There it is on my bike, I haven't had the time to cut it yet, but with the way the pipe sits on my bike the end up the muffler should be to the inside of the shock and not directly on it. Also when the muffler slides on to the pipe you need a set screw to hold it in place. My package didn't come with one but I have more extra screws nuts and bolts than I count laying around the place.

11-30-2009, 02:55 PM	#10 (permalink)
zeeman PM Newbie Join Date: Oct 2009 Location: Cartersville, GA Posts: 69 My Mood:	Re: Exhaust, Would it be possible to.. What intake is that on the Zongshen? I am still looking for one to fit my Lifan 125 on a Z50a. What carb do you run, and do you like it? Zeeman

11-30-2009, 05:22 PM	#11 (permalink)
Bizzel PM Newbie Join Date: Oct 2009 Posts: 39 My Mood:	Re: Exhaust, Would it be possible to.. *"tepco"* *Sorry to thread Jack!* Simalar question, My buddy has a stock xr50 exaust that I was thinking about putting on my 96' z50r, would it make any differance and would it fit? Thanks Bizzel

11-30-2009, 05:29 PM	#12 (permalink)
Driller PM Newbie Join Date: Nov 2009 Location: Tryon, NC Posts: 5	Re: Exhaust, Would it be possible to.. Not meaning to hijack this. Is the diameter of the stock header pipe smaller than these? If the same, can the stock unit be modified to allow better flow? Smack me if this has been covered before. Driller

12-01-2009, 06:02 AM	#13 (permalink)
axrginder6 PM Newbie Join Date: Jul 2009 Location: rocky mount n.c. Posts: 17 My Mood:	Re: Exhaust, Would it be possible to.. heres mine..i think its the same pipe.make it up before u cut it Attached Thumbnails

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)