Planet Minis

yadihonda · 11-01-2009, 06:40 PM

I am literally in my garage with a 69 z50a motor pulled apart. I had to take the studs out to do a better job at removing the base gasket. Now I forget which side the longer studs are suppose to go on. I believe it is the side that kickstart is on (right crankcase). Someone please confirm this?

yadihonda · 11-01-2009, 07:07 PM

.....aarrggh. I'm all over the internet and can't figure this out.

HaiSpeedZ50R · 11-01-2009, 07:50 PM

Looking at the crank case hole head on it's the right side ones..number 7 on the schematic. Number 7's are 196mm and number 8's are 188mm.

yadihonda · 11-01-2009, 07:50 PM

I think I figured it out and here is how I have it: The longer ones have a small shoulder and are on the spark plug/kickstart side of the motor. The shoulder is still visible above above the block when they are installed. The shorter ones have the big shoulder that actually dissapears down into the block. If someone could check me on this I'd be grateful.....

dirtbkr188 · 11-01-2009, 07:50 PM

The two studs with the fatter base go on the left side of the engine, alongside the cam chain. They are the studs that have the dowel pins in place before sliding the cylinder into place.

yadihonda · 11-01-2009, 07:53 PM

I got it wrong..... Just to confirm...the long ones are the #7 on the schematic?

HaiSpeedZ50R · 11-01-2009, 07:54 PM

Quote:

Originally Posted by yadihonda

I got it wrong..... Just to confirm...the long ones are the #7 on the schematic?

Yep

yadihonda · 11-01-2009, 07:55 PM

Got it. Thanks to both of you for the save....

HaiSpeedZ50R · 11-01-2009, 07:56 PM

1969 Honda Z50A OEM Parts, 1969 Honda Z50A OEM Motorcycle Parts - BikeBandit.com

11-01-2009, 06:40 PM	#1 (permalink)
yadihonda 1st Gear Member Join Date: Jun 2009 Location: Eastern PA Posts: 102 My Mood:	Help....I forget which head stud goes where... I am literally in my garage with a 69 z50a motor pulled apart. I had to take the studs out to do a better job at removing the base gasket. Now I forget which side the longer studs are suppose to go on. I believe it is the side that kickstart is on (right crankcase). Someone please confirm this?

11-01-2009, 07:07 PM	#2 (permalink)
yadihonda 1st Gear Member Join Date: Jun 2009 Location: Eastern PA Posts: 102 My Mood:	Re: Help....I forget which head stud goes where... .....aarrggh. I'm all over the internet and can't figure this out.

11-01-2009, 07:50 PM	#3 (permalink)
HaiSpeedZ50R PM Newbie Join Date: Jun 2009 Location: Palm Beach Posts: 92 My Mood:	Re: Help....I forget which head stud goes where... Looking at the crank case hole head on it's the right side ones..number 7 on the schematic. Number 7's are 196mm and number 8's are 188mm. Last edited by HaiSpeedZ50R; 11-01-2009 at 07:52 PM.

11-01-2009, 07:50 PM	#4 (permalink)
yadihonda 1st Gear Member Join Date: Jun 2009 Location: Eastern PA Posts: 102 My Mood:	Re: Help....I forget which head stud goes where... I think I figured it out and here is how I have it: The longer ones have a small shoulder and are on the spark plug/kickstart side of the motor. The shoulder is still visible above above the block when they are installed. The shorter ones have the big shoulder that actually dissapears down into the block. If someone could check me on this I'd be grateful.....

11-01-2009, 07:50 PM	#5 (permalink)
dirtbkr188 3rd Gear Member Join Date: May 2004 Location: New Jersey Posts: 2,970	Re: Help....I forget which head stud goes where... The two studs with the fatter base go on the left side of the engine, alongside the cam chain. They are the studs that have the dowel pins in place before sliding the cylinder into place.

11-01-2009, 07:53 PM	#6 (permalink)
yadihonda 1st Gear Member Join Date: Jun 2009 Location: Eastern PA Posts: 102 My Mood:	Re: Help....I forget which head stud goes where... I got it wrong..... Just to confirm...the long ones are the #7 on the schematic?

11-01-2009, 07:55 PM	#8 (permalink)
yadihonda 1st Gear Member Join Date: Jun 2009 Location: Eastern PA Posts: 102 My Mood:	Re: Help....I forget which head stud goes where... Got it. Thanks to both of you for the save....

11-01-2009, 07:56 PM	#9 (permalink)
HaiSpeedZ50R PM Newbie Join Date: Jun 2009 Location: Palm Beach Posts: 92 My Mood:	Re: Help....I forget which head stud goes where... 1969 Honda Z50A OEM Parts, 1969 Honda Z50A OEM Motorcycle Parts - BikeBandit.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)