Planet Minis

supernes550 · 08-22-2006, 09:37 AM

Picked up a Jincheng Panda which needs a new 6 volt stator assembly. Anyone know where I can get one? I know that monkeybikeuk has the parts but didn't want to go through the hassle of ordering from them. I want to see if i can replace it first before even thinking of swaping out a new 12v motor. Other wise there's going to be a 88cc 6volt motor for sale in the near future. So in the mean time if any one has and tips or info on swaping it out please share. Thanks

lowbike1 · 08-22-2006, 09:46 AM

dratv? or maybe hoopers

supernes550 · 08-22-2006, 10:10 AM

my main concern about buying one is trying to match up the stator wiring to the stock wire harness. i'm sure they'll have different color coding. thanks for the suggestion. i have an email out to dratv.
keep em coming

dayj1 · 08-22-2006, 05:52 PM

Quote:

Originally Posted by supernes550

Picked up a Jincheng Panda which needs a new 6 volt stator assembly. Anyone know where I can get one? I know that monkeybikeuk has the parts but didn't want to go through the hassle of ordering from them. I want to see if i can replace it first before even thinking of swaping out a new 12v motor. Other wise there's going to be a 88cc 6volt motor for sale in the near future. So in the mean time if any one has and tips or info on swaping it out please share. Thanks

Are the Jincheng stators like the original Honda 6V parts or is the configuration totally different? Just a thought since the Honda parts are still available.

If you could post a picture of it, I can check at the local import bike shop around here. I know they sell Lifan parts but I'm not positive about Jincheng stuff.

/dayj1

Pimpindahoes · 08-22-2006, 07:23 PM

does that TB stator not work? looked the same to me....but i only took a few minutes to look.

i wish i had more sources for the 6V stuff or the jincheng stuff......

let me know if you need some help.

supernes550 · 08-22-2006, 08:00 PM

Quote:

Originally Posted by FactoryMotorsports

does that TB stator not work? looked the same to me....but i only took a few minutes to look.

i wish i had more sources for the 6V stuff or the jincheng stuff......

let me know if you need some help.

I didn't want to mess with trying to get the rivets off of the old stator and figure out wiring. What I'd like to do is buy a whole replacement and just swap it out and be done with it. I'll take you up on the offer if i do. Thanks man

Pimpindahoes · 08-22-2006, 08:49 PM

the new stator you have is pretty much all of it.......what else do you need?

supernes550 · 08-22-2006, 11:40 PM

Quote:

Originally Posted by FactoryMotorsports

the new stator you have is pretty much all of it.......what else do you need?

just my keys for now!

I wanted to find a whole jincheng stator assembly and just swap that out, but I may just have to suck it up and work with what i have.

supernes550 · 08-23-2006, 11:04 PM

so i pull the stator off (which required the use of an easy out on those dang srews) and what do i find? pieces of rubber from the upper cam chain roller. check it out? what do you think needs to be done? split the cases? or can i just change out the roller?

supernes550 · 08-25-2006, 12:39 AM

looked at it more tonight and the arm holding the roller was bent. any idea how that would have happened? what else could have been affected?

08-22-2006, 09:37 AM	#1 (permalink)
supernes550 The Golden Ticket Join Date: May 2006 Location: 5outh 5an 0iego Posts: 3,616 My Mood:	Jincheng Panda stator needed Picked up a Jincheng Panda which needs a new 6 volt stator assembly. Anyone know where I can get one? I know that monkeybikeuk has the parts but didn't want to go through the hassle of ordering from them. I want to see if i can replace it first before even thinking of swaping out a new 12v motor. Other wise there's going to be a 88cc 6volt motor for sale in the near future. So in the mean time if any one has and tips or info on swaping it out please share. Thanks

08-23-2006, 11:04 PM	#9 (permalink)
supernes550 The Golden Ticket Join Date: May 2006 Location: 5outh 5an 0iego Posts: 3,616 My Mood:	so i pull the stator off (which required the use of an easy out on those dang srews) and what do i find? pieces of rubber from the upper cam chain roller. check it out? what do you think needs to be done? split the cases? or can i just change out the roller? Attached Thumbnails

08-22-2006, 09:46 AM	#2 (permalink)
lowbike1 3rd Gear Member Join Date: Oct 2004 Location: Maple Ridge BC Canada Posts: 2,125	dratv? or maybe hoopers

08-22-2006, 10:10 AM	#3 (permalink)
supernes550 The Golden Ticket Join Date: May 2006 Location: 5outh 5an 0iego Posts: 3,616 My Mood:	my main concern about buying one is trying to match up the stator wiring to the stock wire harness. i'm sure they'll have different color coding. thanks for the suggestion. i have an email out to dratv. keep em coming

08-22-2006, 07:23 PM	#5 (permalink)
Pimpindahoes 3rd Gear Member Join Date: Apr 2004 Location: Ontario, California Posts: 8,160 My Mood:	does that TB stator not work? looked the same to me....but i only took a few minutes to look. i wish i had more sources for the 6V stuff or the jincheng stuff...... let me know if you need some help.

08-22-2006, 08:49 PM	#7 (permalink)
Pimpindahoes 3rd Gear Member Join Date: Apr 2004 Location: Ontario, California Posts: 8,160 My Mood:	the new stator you have is pretty much all of it.......what else do you need?

08-25-2006, 12:39 AM	#10 (permalink)
supernes550 The Golden Ticket Join Date: May 2006 Location: 5outh 5an 0iego Posts: 3,616 My Mood:	looked at it more tonight and the arm holding the roller was bent. any idea how that would have happened? what else could have been affected?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)