Planet Minis

cdoublejj · 11-27-2008, 01:31 AM

CUSTOM*PARTS-7

any ideas? i need one of these.
doesn't have to be after market either and blinker switch would really nice.

goldie · 11-27-2008, 05:31 AM

Monkey JDM models has that switch.

tmas · 11-27-2008, 05:49 AM

Read this thread. Some good information.
tmas
http://www.planetminis.com/f14/g-cra...on-102142.html

makotosun · 11-27-2008, 12:22 PM

You could also get one of setups off of one of the clone pitbull types - around $35 complete with lever, etc. The Honda will be better quality, but you will spend a bit more with the lever, grips, etc, added in.

The 2007 Honda Metropolitan looks very close to that. Go to a Honda shop and look at one and see if that is what you are looking for.

cdoublejj · 11-27-2008, 05:08 PM

are there old bikes or parts off an old bike i could use? doesn't have to be fancy or anything.

EddieNewYork · 11-27-2008, 05:29 PM

Here's one from jincheng for $19 shipped. eBay Motors: Jincheng/JC50QT/ Left Handle switch/scooter parts (item 160215424340 end time Nov-30-08 09:16:01 PST)

cdoublejj · 11-27-2008, 06:18 PM

Quote:

Originally Posted by EddieNewYork

Here's one from jincheng for $19 shipped. eBay Motors: Jincheng/JC50QT/ Left Handle switch/scooter parts (item 160215424340 end time Nov-30-08 09:16:01 PST)

oooohhhh perfect same size handle as z50 i assume. Thanks Ed!!!

EddieNewYork · 11-27-2008, 06:28 PM

Quote:

Originally Posted by cdoublejj

oooohhhh perfect same size handle as z50 i assume. Thanks Ed!!!

No problem. You may want to ask the seller if it's for 7/8 bars first before ordering though.

mexicanyella · 11-27-2008, 08:04 PM

Honda NC50 Express "no-peds" had combined switchgear and perch like that. Maybe someone near you has one being parted out on Craigslist. I know a guy in St. Louis with 3 or 4 NC50 parts bikes; if you get really hard up and want to go used, let me know and I'll try to reach him and see what he'd want for the controls off one.

cdoublejj · 11-28-2008, 12:15 AM

well i want to get this i assume 7/8 is common almost will to risk the 20 bucks and hope it is 7/8 cause the sooner i get it the better. i'm feeling anxious and impatient. need to start the wiring on my z50.

EDIT just bought it looking at the one up top and the on ebay if you looke at the right side the bevel or curve where it steps down on to the bar are the same. if not hey i got parts to sell or keep.

stevec · 11-28-2008, 01:14 AM

Quote:

Originally Posted by mexicanyella

Honda NC50 Express "no-peds" had combined switchgear and perch like that. Maybe someone near you has one being parted out on Craigslist. I know a guy in St. Louis with 3 or 4 NC50 parts bikes; if you get really hard up and want to go used, let me know and I'll try to reach him and see what he'd want for the controls off one.

Same guy with the handlebar?

I want to experiment with a NC50 headlight and switch...

mexicanyella · 11-28-2008, 09:16 AM

No, different guy. PM me if you're still looking for a bar; I might see either or both of those guys in the next couple of weeks...

cdoublejj · 11-29-2008, 01:12 AM

also bought this.
eBay Motors: LEVER SWITCH ASSM CHINA BIKE LIFAN 100 125 150 200 250 (item 260322709324 end time Dec-26-08 12:43:25 PST)

stevec · 11-29-2008, 07:42 AM

Just grind them off. You only need the switches right?

FastMC · 11-29-2008, 08:03 AM

cdoublejj...If you wish to continue to post, you will keep the "F Bombs" to yourself.

cdoublejj · 11-29-2008, 02:19 PM

Quote:

Originally Posted by stevec

Just grind them off. You only need the switches right?

good idea, but i thought about my self i don't want to get to carried away i want this bike to keep it's character/stock appeal if you will and small detail like that count one of the reasons why i'm getting an up pipe too.i asked if i could cancel the order if not i just might consider grinding it off though i don't want too, they will still be pretty sweet on there.

btw the second set i purchased is for both sides and on my bike the perch is welded on, on one side. for those who didn't see my fbomb post before it got deletafied.

11-27-2008, 01:31 AM	#1 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	looking for this part CUSTOMPARTS-7 any ideas? i need one of these. doesn't have to be after market either and blinker switch would really nice. Last edited by cdoublejj; 11-27-2008 at 01:46 AM.*

11-27-2008, 05:31 AM	#2 (permalink)
goldie 1st Gear Member Join Date: Jan 2007 Location: LA Posts: 103 My Mood:	Re: looking for this part Monkey JDM models has that switch.

11-27-2008, 05:49 AM	#3 (permalink)
tmas ZB50 Jedi Join Date: Apr 2005 Location: Toronto Posts: 4,108	Re: looking for this part Read this thread. Some good information. tmas http://www.planetminis.com/f14/g-cra...on-102142.html

11-27-2008, 12:22 PM	#4 (permalink)
makotosun 2nd Gear Member Join Date: Apr 2005 Location: Washington (southwest) Posts: 510 My Mood:	Re: looking for this part You could also get one of setups off of one of the clone pitbull types - around $35 complete with lever, etc. The Honda will be better quality, but you will spend a bit more with the lever, grips, etc, added in. The 2007 Honda Metropolitan looks very close to that. Go to a Honda shop and look at one and see if that is what you are looking for.

11-27-2008, 05:08 PM	#5 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	Re: looking for this part are there old bikes or parts off an old bike i could use? doesn't have to be fancy or anything.

11-27-2008, 05:29 PM	#6 (permalink)
EddieNewYork Buck Fifteen Join Date: Oct 2007 Location: Los Angeles, CA Posts: 1,913 My Mood:	Re: looking for this part Here's one from jincheng for $19 shipped. eBay Motors: Jincheng/JC50QT/ Left Handle switch/scooter parts (item 160215424340 end time Nov-30-08 09:16:01 PST)

11-27-2008, 08:04 PM	#9 (permalink)
mexicanyella El rey de los puntos Join Date: Aug 2008 Location: Troy, MO Posts: 984	Re: looking for this part Honda NC50 Express "no-peds" had combined switchgear and perch like that. Maybe someone near you has one being parted out on Craigslist. I know a guy in St. Louis with 3 or 4 NC50 parts bikes; if you get really hard up and want to go used, let me know and I'll try to reach him and see what he'd want for the controls off one.

11-28-2008, 12:15 AM	#10 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	Re: looking for this part well i want to get this i assume 7/8 is common almost will to risk the 20 bucks and hope it is 7/8 cause the sooner i get it the better. i'm feeling anxious and impatient. need to start the wiring on my z50. EDIT just bought it looking at the one up top and the on ebay if you looke at the right side the bevel or curve where it steps down on to the bar are the same. if not hey i got parts to sell or keep. Last edited by cdoublejj; 11-28-2008 at 12:22 AM.

11-28-2008, 09:16 AM	#12 (permalink)
mexicanyella El rey de los puntos Join Date: Aug 2008 Location: Troy, MO Posts: 984	Re: looking for this part No, different guy. PM me if you're still looking for a bar; I might see either or both of those guys in the next couple of weeks...

11-29-2008, 01:12 AM	#13 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	Re: looking for this part also bought this. eBay Motors: LEVER SWITCH ASSM CHINA BIKE LIFAN 100 125 150 200 250 (item 260322709324 end time Dec-26-08 12:43:25 PST)

11-29-2008, 07:42 AM	#14 (permalink)
stevec 2nd Gear Member Join Date: Sep 2007 Posts: 425 My Mood:	Re: looking for this part Just grind them off. You only need the switches right?

11-29-2008, 08:03 AM	#15 (permalink)
FastMC Sporting the Merkin Join Date: Mar 2004 Location: boston area Posts: 5,072 My Mood:	Re: looking for this part cdoublejj...If you wish to continue to post, you will keep the "F Bombs" to yourself.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)