Planet Minis

stunami · 07-13-2008, 06:58 PM

ok problem #2
cant get the mag off because the threads are damaged is there a tool i can get or should i leave this one for the pros

SUZUKIRM12594 · 07-13-2008, 07:01 PM

I say leave it to the pro. Unless you're like me (I like to do it myself) then go ahead and drill it out and rethread it and get a new screw that will fit the new thread. You can find everything you need at your local hard ware store.

T313M · 07-13-2008, 07:10 PM

Or you can drill out the middle of the bolt, and run an easy out in it. Thats how I get most of my bolts out. Just don't snap the easy out in there, then it sucks drilling that out too.

BlackBeard · 07-13-2008, 07:40 PM

explain the problem for me a little more, the flywheel, cover, and by stripped do you mean the asctual threads on the shaft not allowing it to unscrew or the bolt heads?

07-13-2008, 06:58 PM	#1 (permalink)
stunami PM Newbie Join Date: Jul 2008 Location: LAKES REGION N.H. Posts: 46	messed up threads ok problem #2 cant get the mag off because the threads are damaged is there a tool i can get or should i leave this one for the pros

07-13-2008, 07:01 PM	#2 (permalink)
SUZUKIRM12594 3rd Gear Member Join Date: Jun 2008 Location: Glendale California Posts: 4,540 My Mood:	Re: messed up threads I say leave it to the pro. Unless you're like me (I like to do it myself) then go ahead and drill it out and rethread it and get a new screw that will fit the new thread. You can find everything you need at your local hard ware store.

07-13-2008, 07:10 PM	#3 (permalink)
T313M 3rd Gear Member Join Date: May 2005 Location: pa Posts: 1,330	Re: messed up threads Or you can drill out the middle of the bolt, and run an easy out in it. Thats how I get most of my bolts out. Just don't snap the easy out in there, then it sucks drilling that out too.

07-13-2008, 07:40 PM	#4 (permalink)
BlackBeard "ZBBT" Join Date: Oct 2007 Location: 50 riders Posts: 1,836 My Mood:	Re: messed up threads explain the problem for me a little more, the flywheel, cover, and by stripped do you mean the asctual threads on the shaft not allowing it to unscrew or the bolt heads?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)