Planet Minis

Pierce · 12-03-2007, 08:28 PM

What size sprockets are you guys running on your NSR wheels and where did you get them? I am thinking a low 30's tooth for my Ape but just wondering where you guys got them if they were in the states or if I need to put another order in for over seas. Thanks

reynolds_brad · 12-03-2007, 09:00 PM

running 16 35 on my ZB with Daytona 4 speed race trans and 124+R.

Same guy that made my stator cover made it, same design pattern.

Most of the major JDM shops made NSR sprockets though.

Pierce · 12-04-2007, 08:28 AM

Yeah I am running the 80cc Takegawa topend,haven't had a chance to go and count my current setup for teeth. I used a speed calculator to figure that I would like to run 14-33 for a nice top speed of 55-60 at about 9500rpm just not sure if the motor can pull that ratio or not.

Kurlon · 12-04-2007, 09:14 AM

Sprocket Specialists makes NSR50 sprockets. BEFORE you order, measure your bolt spacing. If your wheels are like mine and run tighter spacing than normal, I've already got a custom sprocket number setup with SS to match.

Pierce · 12-04-2007, 10:50 AM

what would the tighter spacing be? I don't have anything to measure against to know the difference....

Z · 12-04-2007, 10:53 AM

Dan - What kurlon is referring to is I think Sprocket Specialists has their NSR50 sprockets cut wrong. All NSR50 wheels, both 3 and 6 spoke all use the same sprockets. I've had 3 different pairs of wheels and the spacing is all the same between all years. Kurlon ordered one and it did not fit, so he sent them one and they made the correct sprocket for him.

Pierce · 12-04-2007, 10:56 AM

Ah exactly what you were saying before. I didn't think Honda would go out of their way and make two different versions.....

jmurray192 · 12-04-2007, 01:17 PM

Is that a new picture brad.. thats a sweeeet ass!

also, I order a sprocket from SS and had no fitment issues.

reynolds_brad · 12-04-2007, 01:23 PM

Quote:

Originally Posted by jmurray192

Is that a new picture brad.. thats a sweeeet ass!

also, I order a sprocket from SS and had no fitment issues.

Yeah the pic is pretty recent, Took it just about a month ago.

12-03-2007, 08:28 PM	#1 (permalink)
Pierce 2nd Gear Member Join Date: Feb 2006 Location: Evanston Il Posts: 728 My Mood:	NSR Sprockets on a four stroke What size sprockets are you guys running on your NSR wheels and where did you get them? I am thinking a low 30's tooth for my Ape but just wondering where you guys got them if they were in the states or if I need to put another order in for over seas. Thanks

12-03-2007, 09:00 PM	#2 (permalink)
reynolds_brad Advertiser Join Date: Dec 2003 Location: San Francisco, CA Posts: 2,719	Re: NSR Sprockets on a four stroke running 16 35 on my ZB with Daytona 4 speed race trans and 124+R. Same guy that made my stator cover made it, same design pattern. Most of the major JDM shops made NSR sprockets though. __________________ pecore nere ufficiose Motoshop Z - Honda50.com

12-04-2007, 08:28 AM	#3 (permalink)
Pierce 2nd Gear Member Join Date: Feb 2006 Location: Evanston Il Posts: 728 My Mood:	Re: NSR Sprockets on a four stroke Yeah I am running the 80cc Takegawa topend,haven't had a chance to go and count my current setup for teeth. I used a speed calculator to figure that I would like to run 14-33 for a nice top speed of 55-60 at about 9500rpm just not sure if the motor can pull that ratio or not.

12-04-2007, 09:14 AM	#4 (permalink)
Kurlon Super Moderator Join Date: Feb 2005 Location: Windham, ME Posts: 8,301	Re: NSR Sprockets on a four stroke Sprocket Specialists makes NSR50 sprockets. BEFORE you order, measure your bolt spacing. If your wheels are like mine and run tighter spacing than normal, I've already got a custom sprocket number setup with SS to match.

12-04-2007, 10:50 AM	#5 (permalink)
Pierce 2nd Gear Member Join Date: Feb 2006 Location: Evanston Il Posts: 728 My Mood:	Re: NSR Sprockets on a four stroke what would the tighter spacing be? I don't have anything to measure against to know the difference....

12-04-2007, 10:53 AM	#6 (permalink)
Z 5th Gear Member Join Date: Sep 2003 Location: KANSAS Posts: 8,538	Re: NSR Sprockets on a four stroke Dan - What kurlon is referring to is I think Sprocket Specialists has their NSR50 sprockets cut wrong. All NSR50 wheels, both 3 and 6 spoke all use the same sprockets. I've had 3 different pairs of wheels and the spacing is all the same between all years. Kurlon ordered one and it did not fit, so he sent them one and they made the correct sprocket for him.

12-04-2007, 10:56 AM	#7 (permalink)
Pierce 2nd Gear Member Join Date: Feb 2006 Location: Evanston Il Posts: 728 My Mood:	Re: NSR Sprockets on a four stroke Ah exactly what you were saying before. I didn't think Honda would go out of their way and make two different versions.....

12-04-2007, 01:17 PM	#8 (permalink)
jmurray192 2nd Gear Member Join Date: Aug 2006 Location: AZ Posts: 976	Re: NSR Sprockets on a four stroke Is that a new picture brad.. thats a sweeeet ass! also, I order a sprocket from SS and had no fitment issues.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)