Planet Minis

BRAWNYREBEL · 12-05-2006, 06:11 AM

Can i use my stock exaust with a 88cc kit or a 125 locin engine or will it be too restrictive?

dayj1 · 12-05-2006, 07:55 AM

Quote:

Originally Posted by BRAWNYREBEL

Can i use my stock exaust with a 88cc kit or a 125 locin engine or will it be too restrictive?

I have a stock exhaust on my z50ak5 with an 88cc kit and it runs OK. It appears to be way too restrictive, though. I think I would gain a considerable amount of power with a free flowing exhaust, which is next on my wish list.

/dayj1

davez · 12-05-2006, 09:40 AM

Your top end will suffer

BRAWNYREBEL · 12-05-2006, 02:17 PM

Is there a reasonably priced pipe out there? most of the ones i see cost more than i paid for the whole bike

BRAWNYREBEL · 12-05-2006, 02:18 PM

If i can find a stock pipe i may cut it in half and see if i can free it up a little.

turboglenn · 12-05-2006, 04:35 PM

i have a stock pipe on my 88 race head motor, but i have a custom tip similar to the commercial ones out there and the tip did wonders for the power... i made it on my lathe when i was bored one day

my friend has the exact same motor as me and bought a cheapo flyin'50's pipe for 79 bucks on ebay and it made a hell of a difference in the mid range top end, but sucked a little bottom end out of it...the thing is literally a monster on the top compared to mine now ( but he also has the new race head with teh bigger valves)

davez · 12-05-2006, 06:11 PM

Look at Tbolt or DrAtv for cheap pipes

12-05-2006, 06:11 AM	#1 (permalink)
BRAWNYREBEL 1st Gear Member Join Date: Nov 2006 Location: Taylor Mill ,KY Posts: 152	stock pipe on a 88cc kit Can i use my stock exaust with a 88cc kit or a 125 locin engine or will it be too restrictive?

12-05-2006, 09:40 AM	#3 (permalink)
davez 2nd Gear Member Join Date: Dec 2005 Posts: 769	Your top end will suffer

12-05-2006, 02:17 PM	#4 (permalink)
BRAWNYREBEL 1st Gear Member Join Date: Nov 2006 Location: Taylor Mill ,KY Posts: 152	Is there a reasonably priced pipe out there? most of the ones i see cost more than i paid for the whole bike

12-05-2006, 02:18 PM	#5 (permalink)
BRAWNYREBEL 1st Gear Member Join Date: Nov 2006 Location: Taylor Mill ,KY Posts: 152	If i can find a stock pipe i may cut it in half and see if i can free it up a little.

12-05-2006, 04:35 PM	#6 (permalink)
turboglenn 3rd Gear Member Join Date: Jul 2005 Location: Omaha, NE Posts: 1,941	i have a stock pipe on my 88 race head motor, but i have a custom tip similar to the commercial ones out there and the tip did wonders for the power... i made it on my lathe when i was bored one day my friend has the exact same motor as me and bought a cheapo flyin'50's pipe for 79 bucks on ebay and it made a hell of a difference in the mid range top end, but sucked a little bottom end out of it...the thing is literally a monster on the top compared to mine now ( but he also has the new race head with teh bigger valves)

12-05-2006, 06:11 PM	#7 (permalink)
davez 2nd Gear Member Join Date: Dec 2005 Posts: 769	Look at Tbolt or DrAtv for cheap pipes

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)