Planet Minis

cdoublejj · 11-16-2008, 01:58 PM

http://www.planetminis.com/f14/my-19...50a-98183.html
pics ^^^

been working my ass off at micky D's to get this thing up and running after the ignition failed finaly have **** loads of stuff coming in the mail. all i really need now is an exhaust i know down swept is good for street but i want an up swept to cover the gapping hole in the frame. i am looking for a pipe that isn't to close to the seat so if i have a rider squeezed on the back that she doesn't get burnt

butt i can't afford much i was hoping for a pipe under 200 dr.atv need to stock his **** cus he is out of most pipes.

PLEASE AND THANKS IN ADVANCE ALL HELP IS APPRECIATED!!!!

Edit does any one have pics of any z50's with down swept like fairly stock bike ie non extend swing arm. cause i don't want a pipe hanging off the back of the bike.

cdoublejj · 11-17-2008, 06:56 PM

any help or ideas at all infact putting prices a side any good up swept pipes routed like stock, i wanna ride people [girls] on the back? i bet some one might have one or know where one is?

so desperate!!!!

big pete · 11-17-2008, 07:05 PM

OVER Racing makes a sweet titanium up pipe

It's only about $600

tmas · 11-17-2008, 07:12 PM

Here is a thread on pipes. I'd go minigunz.
tmas

http://www.planetminis.com/f14/opini...ust-58724.html

big pete · 11-17-2008, 07:13 PM

G-Craft also makes one for a little cheaper ($550)

cdoublejj · 11-17-2008, 07:33 PM

wonder if i can afford this? Oh thanks for the comments every bit of knowledge adds up!

Hot Rod Parts for Z-50's

shw911 · 11-17-2008, 07:41 PM

Yoshimura Titanium TYPE-5 Tri-Oval two exit exhaust system

cdoublejj · 11-17-2008, 07:45 PM

N1766.jpg

Minigunz Performance

$245.00 shipped

****ING PERFECT DREAM COME TRUE

btw Shw911 that is a down pipe if i putthat on you'd be able to see the wires in and **** on the frame.

dirttrackin280h · 11-17-2008, 07:47 PM

Didn't Jeff stop making the Minigunz exhaust??

cdoublejj · 11-17-2008, 07:50 PM

Quote:

Originally Posted by dirttrackin280h

Didn't Jeff stop making the Minigunz exhaust??

if he did i will cry.

shw911 · 11-17-2008, 08:32 PM

No he did not. Call him up.

cdoublejj · 11-17-2008, 08:36 PM

Quote:

Originally Posted by shw911

No he did not. Call him up.

AAAAAAAAAAAAAHHHHHHHHHHHHHH yyyyyyyyyeeeeeeeeeeeeeeesssssssssss

can't wait till i get paid i'm gonna get that pipe.
i assume it will work just fine for a 125 as in not constrictive?

FastMC · 11-17-2008, 08:44 PM

This is another nice Z pipe you might consider. Not quite as loud as a minigunz and pretty well made.

Big Gun Exhaust

cdoublejj · 11-17-2008, 08:48 PM

I'm young and ignorant so loud is good. I have this thing cause i like the scream of engines i like it for some reason guess i'm a petrol head.

FastMC · 11-17-2008, 08:56 PM

Quote:

Originally Posted by cdoublejj

I'm young and ignorant so loud is good. I have this thing cause i like the scream of engines i like it for some reason guess i'm a petrol head.

I hear ya there. I have a minigunz on my race Z and a Big Gun on my neighborhood Z...

cdoublejj · 11-17-2008, 09:01 PM

i go on youtube, put my good head phones in, turn up the volume and look up dyno runs.

big pete · 11-18-2008, 04:37 PM

Found a Takegawa exhaust on fleabay
Honda Z50 Z50R Z50J Z50A Takegawa Z Style Exhaust - eBay (item 120333326111 end time Nov-23-08 01:14:13 PST)

RAZZO · 11-18-2008, 04:49 PM

Minigunz the way to go! Come on guys!!! The kid works at Mickey D's and your throwing $600 pipes at him?

cdoublejj · 11-18-2008, 06:09 PM

dude when i get that minigunz my eyes will water. my dad was saying something about the minigunz not making it faster but i said it was less restrictive than a stock 50 pipe. will it work with my 125 because with the stock pipe the mounting ear doesn't line to the bolt hole on the frame?

FastMC · 11-18-2008, 06:12 PM

Quote:

Originally Posted by cdoublejj

dude when i get that minigunz my eyes will water. my dad was saying something about the minigunz not making it faster but i said it was less restrictive than a stock 50 pipe. will it work with my 125 because with the stock pipe the mounting ear doesn't line to the bolt hole on the frame?

Where the pipe slips into the canister you have a little room for adjustment. I have one on my Z with a china motor and it fits fine.

11-16-2008, 01:58 PM	#1 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	trying to find up swept pipe for z50 http://www.planetminis.com/f14/my-19...50a-98183.html pics ^^^ been working my ass off at micky D's to get this thing up and running after the ignition failed finaly have ** loads of stuff coming in the mail. all i really need now is an exhaust i know down swept is good for street but i want an up swept to cover the gapping hole in the frame. i am looking for a pipe that isn't to close to the seat so if i have a rider squeezed on the back that she doesn't get burnt butt i can't afford much i was hoping for a pipe under 200 dr.atv need to stock his ** cus he is out of most pipes. PLEASE AND THANKS IN ADVANCE ALL HELP IS APPRECIATED!!!! Edit does any one have pics of any z50's with down swept like fairly stock bike ie non extend swing arm. cause i don't want a pipe hanging off the back of the bike. Last edited by cdoublejj; 11-16-2008 at 02:03 PM.

11-17-2008, 06:56 PM	#2 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	Re: trying to find up swept pipe for z50 any help or ideas at all infact putting prices a side any good up swept pipes routed like stock, i wanna ride people [girls] on the back? i bet some one might have one or know where one is? so desperate!!!!

11-17-2008, 07:05 PM	#3 (permalink)
big pete 2nd Gear Member Join Date: Apr 2008 Location: Norcal Posts: 866	Re: trying to find up swept pipe for z50 OVER Racing makes a sweet titanium up pipe It's only about $600

11-17-2008, 07:12 PM	#4 (permalink)
tmas ZB50 Jedi Join Date: Apr 2005 Location: Toronto Posts: 4,108	Re: trying to find up swept pipe for z50 Here is a thread on pipes. I'd go minigunz. tmas http://www.planetminis.com/f14/opini...ust-58724.html

11-17-2008, 07:13 PM	#5 (permalink)
big pete 2nd Gear Member Join Date: Apr 2008 Location: Norcal Posts: 866	Re: trying to find up swept pipe for z50 G-Craft also makes one for a little cheaper ($550)

11-17-2008, 07:33 PM	#6 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	Re: trying to find up swept pipe for z50 wonder if i can afford this? Oh thanks for the comments every bit of knowledge adds up! Hot Rod Parts for Z-50's Last edited by cdoublejj; 11-17-2008 at 07:47 PM.

11-17-2008, 07:41 PM	#7 (permalink)
shw911 "Eating Ramen" Join Date: Feb 2007 Location: Los Angeles, CA Posts: 1,894	Re: trying to find up swept pipe for z50 Yoshimura Titanium TYPE-5 Tri-Oval two exit exhaust system

11-17-2008, 07:45 PM	#8 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	Re: trying to find up swept pipe for z50 N1766.jpg Minigunz Performance $245.00 shipped **ING PERFECT DREAM COME TRUE btw Shw911 that is a down pipe if i putthat on you'd be able to see the wires in and ** on the frame. Last edited by cdoublejj; 11-17-2008 at 07:49 PM.

11-17-2008, 07:47 PM	#9 (permalink)
dirttrackin280h 3rd Gear Member Join Date: Aug 2006 Location: Oakley, California Posts: 1,008	Re: trying to find up swept pipe for z50 Didn't Jeff stop making the Minigunz exhaust??

11-17-2008, 08:32 PM	#11 (permalink)
shw911 "Eating Ramen" Join Date: Feb 2007 Location: Los Angeles, CA Posts: 1,894	Re: trying to find up swept pipe for z50 No he did not. Call him up.

11-17-2008, 08:44 PM	#13 (permalink)
FastMC Sporting the Merkin Join Date: Mar 2004 Location: boston area Posts: 5,072 My Mood:	Re: trying to find up swept pipe for z50 This is another nice Z pipe you might consider. Not quite as loud as a minigunz and pretty well made. Big Gun Exhaust

11-17-2008, 08:48 PM	#14 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	Re: trying to find up swept pipe for z50 I'm young and ignorant so loud is good. I have this thing cause i like the scream of engines i like it for some reason guess i'm a petrol head.

11-17-2008, 09:01 PM	#16 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	Re: trying to find up swept pipe for z50 i go on youtube, put my good head phones in, turn up the volume and look up dyno runs.

11-18-2008, 04:37 PM	#17 (permalink)
big pete 2nd Gear Member Join Date: Apr 2008 Location: Norcal Posts: 866	Re: trying to find up swept pipe for z50 Found a Takegawa exhaust on fleabay Honda Z50 Z50R Z50J Z50A Takegawa Z Style Exhaust - eBay (item 120333326111 end time Nov-23-08 01:14:13 PST)

11-18-2008, 04:49 PM	#18 (permalink)
RAZZO Old School Z50s Join Date: Jun 2005 Location: NEW JERSEY PINELANDS Posts: 1,971 My Mood:	Re: trying to find up swept pipe for z50 Minigunz the way to go! Come on guys!!! The kid works at Mickey D's and your throwing $600 pipes at him?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

11-18-2008, 06:09 PM	#19 (permalink)
cdoublejj 3rd Gear Member Join Date: Oct 2008 Location: St.Joe MO Posts: 1,371 My Mood:	Re: trying to find up swept pipe for z50 dude when i get that minigunz my eyes will water. my dad was saying something about the minigunz not making it faster but i said it was less restrictive than a stock 50 pipe. will it work with my 125 because with the stock pipe the mounting ear doesn't line to the bolt hole on the frame?