Planet Minis

Fullthrottle · 12-01-2006, 06:43 PM

whats the good one to put on coil spring fork? {fork without oil seal!

}

white grease water resistant?
brake pad grease?
tefflon one?
bellray type (spray can)?
prolab?
vaseline?
special gear grease {more thick}?

lot of choice... what's the better?

dirtbkr188 · 12-01-2006, 06:53 PM

I use the Bel-Ray Waterproof grease in the tub...

aedwards07 · 12-01-2006, 06:58 PM

^^^^Thats what I use as well.Its a cool green color as well.

Fullthrottle · 12-28-2006, 06:20 PM

finally i use Motul tech grease 300 extreme pressure lithium complex.

sub question...
is it possible to remove fork rubber boots without removing all the stuff for the right side of the fork?... left side no problemo... but right... any trick?

RcWannabe · 12-28-2006, 06:23 PM

I use white lithium grease in a spray can because you can re grease real easy just take out the top bolts that hold the springs and spray it down the bolt holes

arlindsay1992 · 12-28-2006, 07:56 PM

I don't think so. You have to pull it all apart. Unless you feel like cutting it off.

12-01-2006, 06:43 PM	#1 (permalink)
Fullthrottle 2nd Gear Member Join Date: Aug 2005 Location: Montréal, Québec, Canada Posts: 424	what kind of grease? 4 fork whats the good one to put on coil spring fork? {fork without oil seal! } white grease water resistant? brake pad grease? tefflon one? bellray type (spray can)? prolab? vaseline? special gear grease {more thick}? lot of choice... what's the better?

12-01-2006, 06:53 PM	#2 (permalink)
dirtbkr188 3rd Gear Member Join Date: May 2004 Location: New Jersey Posts: 2,973	I use the Bel-Ray Waterproof grease in the tub...

12-01-2006, 06:58 PM	#3 (permalink)
aedwards07 3rd Gear Member Join Date: Jan 2004 Location: Kissimmee,FL Posts: 5,875	^^^^Thats what I use as well.Its a cool green color as well.

12-28-2006, 06:20 PM	#4 (permalink)
Fullthrottle 2nd Gear Member Join Date: Aug 2005 Location: Montréal, Québec, Canada Posts: 424	finally i use Motul tech grease 300 extreme pressure lithium complex. sub question... is it possible to remove fork rubber boots without removing all the stuff for the right side of the fork?... left side no problemo... but right... any trick?

12-28-2006, 06:23 PM	#5 (permalink)
RcWannabe 3rd Gear Member Join Date: May 2006 Location: Erie, Pa Posts: 7,437	I use white lithium grease in a spray can because you can re grease real easy just take out the top bolts that hold the springs and spray it down the bolt holes

12-28-2006, 07:56 PM	#6 (permalink)
arlindsay1992 "High Speed Record Guy" Join Date: Mar 2006 Location: Northern Virginia Posts: 4,369	I don't think so. You have to pull it all apart. Unless you feel like cutting it off.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)