Planet Minis

d0n · 05-18-2006, 06:33 AM

I'm putting a 1984 z50r together. I got the rolling chassis from ebay for $81 and installed a stock ZB50 engine and wiring harness in it. Now I need a few things to get it running. If no one has what I need here, I'll troll ebay or resort to OEM parts from servicehonda.com

What I'm looking for...

Complete throttle assembly with on/off switch and front brake lever. Must have a decent throttle cable.

Rear fender

3 number panels (front and both sides) & 1 rubber keeper for front panel

Complate exhaust

used chain w/master link

Lemme know what you have and how much $

thanks!

racerx351 · 05-18-2006, 07:50 AM

looking good d0n!!!

Z · 05-18-2006, 07:55 AM

Do you have a chain cracker? If so, I have a couple of used chains with very low miles (less then 20) you can have for $5 plus actual shipping. I pulled it off my CT70 and it will need to have some links removed.

d0n · 05-18-2006, 08:30 AM

Dan, yes I do. That would be great.

reynolds_brad · 05-18-2006, 09:18 AM

I have a exhaust with almost no miles on it off of a 98 z50j (monkey) from japan

im looking for 70$ + shipping.

Its mint.

Z · 05-18-2006, 09:20 AM

Damn Brad, that's cheap! I sold mine for $150. I'd jump on that Don...

d0n · 05-18-2006, 09:45 AM

Brad thanks but I'm looking for the correct black one. I don't like the look of the chrome guard. I just missed one on ebay. It went for $46.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=4639663634

Outlaw Powersports · 05-18-2006, 09:52 AM

Brad I am interested in your pipe pm me.

racerx351 · 05-18-2006, 09:53 AM

Quote:

Originally Posted by d0n

I'm putting a 1984 z50r together. I got the rolling chassis from ebay for $81 and installed a stock ZB50 engine and wiring harness in it. Now I need a few things to get it running. If no one has what I need here, I'll troll ebay or resort to OEM parts from servicehonda.com

What I'm looking for...

Complete throttle assembly with on/off switch and front brake lever. Must have a decent throttle cable.

Rear fender

3 number panels (front and both sides) & 1 rubber keeper for front panel

Complate exhaust

used chain w/master link

Lemme know what you have and how much $

thanks!

d0n, shifter worked ok ???

Z · 05-18-2006, 09:55 AM

Don,

You are using a 12V coil on that bike, correct?

reynolds_brad · 05-18-2006, 10:07 AM

Quote:

Originally Posted by d0n

Brad thanks but I'm looking for the correct black one. I don't like the look of the chrome guard. I just missed one on ebay. It went for $46.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=4639663634

No worries d0n, wasnt sure what you were going for. just putting it up there. Good luck with the build.

d0n · 05-18-2006, 10:36 AM

racerx actually the shifter doesn't fit on very deep. It's hits the CDI cover when I slide it on the shifter shaft more than 3/8". I did tighten it down on the outside part of the shifter shaft and it does hold ok but it won't slide all the way on without hitting the side case.

Was this shifter from a ZB or another bike?

Dan, I got a complete ZB wiring harness from ebay and ziptied it on the backbone this z50r. It came with the coil, cdi, flasher, rear brake light switch etc etc. I could hook up all the lights in the future.

I'm wondering if I need to hook up a battery to run the bike as/is without any lights? Or do I need the battery to complete the circuit?

racerx351 · 05-18-2006, 10:41 AM

it was the st90 shifter!!

d0n · 05-18-2006, 10:49 AM

Quote:

Originally Posted by racerx351

it was the st90 shifter!!

ahhhhh that's why it doesn't really fit.

Z · 05-18-2006, 10:54 AM

Quote:

Originally Posted by d0n

racerx actually the shifter doesn't fit on very deep. It's hits the CDI cover when I slide it on the shifter shaft more than 3/8". I did tighten it down on the outside part of the shifter shaft and it does hold ok but it won't slide all the way on without hitting the side case.

Was this shifter from a ZB or another bike?

Dan, I got a complete ZB wiring harness from ebay and ziptied it on the backbone this z50r. It came with the coil, cdi, flasher, rear brake light switch etc etc. I could hook up all the lights in the future.

I'm wondering if I need to hook up a battery to run the bike as/is without any lights? Or do I need the battery to complete the circuit?

You don't need a battery, but it's not good for the CDI and coil to run without the battery or a bat pak.. The voltage can spike leading to failure of the electronic components.

racerx351 · 05-18-2006, 11:47 AM

Quote:

Originally Posted by d0n

ahhhhh that's why it doesn't really fit.

sorry dude.. it worked on my zb50 engine...

tmas · 05-18-2006, 12:39 PM

dOn
spend the $$ and get a performance pipe!
tmas

Z · 05-18-2006, 12:45 PM

Quote:

Originally Posted by tmas

dOn
spend the $$ and get a performance pipe!
tmas

It would cost more then he paid for the whole bike! Minigunz.com would be the pipe of choice..

d0n · 05-18-2006, 12:52 PM

Quote:

Originally Posted by racerx351

sorry dude.. it worked on my zb50 engine...

It does go on the shaft and I was able to tighten it so it'll work. It's just not 100% correct. I could drop it waaaay down and it might clear but I don't wanna rip it off on a rock or stump.

I'm glad to have it. I wouldn't have a shifter if you didn't send me this one! Thanks!

Z · 05-18-2006, 12:59 PM

Don,

Do you need a stock ZB shifter? I have one if you would like to purchase it. I have no need for it..

05-18-2006, 06:33 AM	#1 (permalink)
d0n 3rd Gear Member Join Date: Nov 2005 Location: Troy NY Posts: 2,172	Who's parting out a 1980's Z50R? I'm putting a 1984 z50r together. I got the rolling chassis from ebay for $81 and installed a stock ZB50 engine and wiring harness in it. Now I need a few things to get it running. If no one has what I need here, I'll troll ebay or resort to OEM parts from servicehonda.com What I'm looking for... Complete throttle assembly with on/off switch and front brake lever. Must have a decent throttle cable. Rear fender 3 number panels (front and both sides) & 1 rubber keeper for front panel Complate exhaust used chain w/master link Lemme know what you have and how much $ thanks!

05-18-2006, 10:36 AM	#12 (permalink)
d0n 3rd Gear Member Join Date: Nov 2005 Location: Troy NY Posts: 2,172	racerx actually the shifter doesn't fit on very deep. It's hits the CDI cover when I slide it on the shifter shaft more than 3/8". I did tighten it down on the outside part of the shifter shaft and it does hold ok but it won't slide all the way on without hitting the side case. Was this shifter from a ZB or another bike? Dan, I got a complete ZB wiring harness from ebay and ziptied it on the backbone this z50r. It came with the coil, cdi, flasher, rear brake light switch etc etc. I could hook up all the lights in the future. I'm wondering if I need to hook up a battery to run the bike as/is without any lights? Or do I need the battery to complete the circuit? Last edited by d0n; 05-18-2006 at 10:41 AM.

05-18-2006, 07:50 AM	#2 (permalink)
racerx351 3rd Gear Member Join Date: Nov 2005 Posts: 2,774	looking good d0n!!!

05-18-2006, 07:55 AM	#3 (permalink)
Z 5th Gear Member Join Date: Sep 2003 Location: KANSAS Posts: 8,541	Do you have a chain cracker? If so, I have a couple of used chains with very low miles (less then 20) you can have for $5 plus actual shipping. I pulled it off my CT70 and it will need to have some links removed.

05-18-2006, 08:30 AM	#4 (permalink)
d0n 3rd Gear Member Join Date: Nov 2005 Location: Troy NY Posts: 2,172	Dan, yes I do. That would be great.

05-18-2006, 09:18 AM	#5 (permalink)
reynolds_brad Advertiser Join Date: Dec 2003 Location: San Francisco, CA Posts: 2,719	I have a exhaust with almost no miles on it off of a 98 z50j (monkey) from japan im looking for 70$ + shipping. Its mint.

05-18-2006, 09:20 AM	#6 (permalink)
Z 5th Gear Member Join Date: Sep 2003 Location: KANSAS Posts: 8,541	Damn Brad, that's cheap! I sold mine for $150. I'd jump on that Don...

05-18-2006, 09:45 AM	#7 (permalink)
d0n 3rd Gear Member Join Date: Nov 2005 Location: Troy NY Posts: 2,172	Brad thanks but I'm looking for the correct black one. I don't like the look of the chrome guard. I just missed one on ebay. It went for $46. http://cgi.ebay.com/ebaymotors/ws/eB...tem=4639663634

05-18-2006, 09:52 AM	#8 (permalink)
Outlaw Powersports 3rd Gear Member Join Date: Oct 2005 Posts: 1,786	Brad I am interested in your pipe pm me.

05-18-2006, 09:55 AM	#10 (permalink)
Z 5th Gear Member Join Date: Sep 2003 Location: KANSAS Posts: 8,541	Don, You are using a 12V coil on that bike, correct?

05-18-2006, 10:41 AM	#13 (permalink)
racerx351 3rd Gear Member Join Date: Nov 2005 Posts: 2,774	it was the st90 shifter!!

05-18-2006, 12:39 PM	#17 (permalink)
tmas ZB50 Jedi Join Date: Apr 2005 Location: Toronto Posts: 4,108	dOn spend the $$ and get a performance pipe! tmas

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

05-18-2006, 12:59 PM	#20 (permalink)
Z 5th Gear Member Join Date: Sep 2003 Location: KANSAS Posts: 8,541	Don, Do you need a stock ZB shifter? I have one if you would like to purchase it. I have no need for it..