Planet Minis

larsdg · 02-14-2008, 09:59 AM

can anyone tell me what i need to swap to a newer engine like the 110 jobs on ebay etc. what has to be changed to make it run work etc. the bike
has no engine right now but all org wiring coil etc. it is a 1977 z50 roller:

AHPminis · 02-14-2008, 10:11 AM

You will need to use the 12V wiring harness that comes with the engine package.

larsdg · 02-14-2008, 10:37 AM

does that mean the coil and cdi box etc. with the new harness.
and can i hook up lights.
thanks

patman · 02-25-2008, 05:09 PM

Most engines come with wiring harness,CDI,and coil.As far as lights,it'll need a stator that is wrapped for lights.You will also need a voltage regulator.

larsdg · 02-26-2008, 12:17 PM

if i have the regulator and and engine with the wiring stator in it do you hook the wires to the reg or what and then run them to lights

patman · 02-26-2008, 12:28 PM

It depends on what kind of regulator you have.I suggest following the manufacturers instructions.Do a search here on PM too.Search for "voltage regulator".There have been several posts about the subject.I know I posted a wiring diagram for mine once.

02-14-2008, 09:59 AM	#1 (permalink)
larsdg PM Newbie Join Date: Feb 2008 Location: new jersey Posts: 85	z50 engine swap.(help) can anyone tell me what i need to swap to a newer engine like the 110 jobs on ebay etc. what has to be changed to make it run work etc. the bike has no engine right now but all org wiring coil etc. it is a 1977 z50 roller:

02-14-2008, 10:11 AM	#2 (permalink)
AHPminis Advertiser Join Date: Aug 2004 Location: East Coast - PA Posts: 4,632	Re: z50 engine swap.(help) You will need to use the 12V wiring harness that comes with the engine package. __________________ Website - www.ahpminis.com Email - mark@ahpminis.com AHP - TB -Sano - RB - Kitaco - iShock - Fox - Marzocchi - F50s - Utopia - Takegawa - Crower

02-14-2008, 10:37 AM	#3 (permalink)
larsdg PM Newbie Join Date: Feb 2008 Location: new jersey Posts: 85	Re: z50 engine swap.(help) does that mean the coil and cdi box etc. with the new harness. and can i hook up lights. thanks

02-25-2008, 05:09 PM	#4 (permalink)
patman 3rd Gear Member Join Date: Aug 2006 Location: Minnesota Posts: 2,211	Re: z50 engine swap.(help) Most engines come with wiring harness,CDI,and coil.As far as lights,it'll need a stator that is wrapped for lights.You will also need a voltage regulator.

02-26-2008, 12:17 PM	#5 (permalink)
larsdg PM Newbie Join Date: Feb 2008 Location: new jersey Posts: 85	Re: z50 engine swap.(help) if i have the regulator and and engine with the wiring stator in it do you hook the wires to the reg or what and then run them to lights

02-26-2008, 12:28 PM	#6 (permalink)
patman 3rd Gear Member Join Date: Aug 2006 Location: Minnesota Posts: 2,211	Re: z50 engine swap.(help) It depends on what kind of regulator you have.I suggest following the manufacturers instructions.Do a search here on PM too.Search for "voltage regulator".There have been several posts about the subject.I know I posted a wiring diagram for mine once.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)