Planet Minis

pitbike120 · 11-01-2009, 03:14 PM

I have just put in a new race cam from TB in my klx... I have the 143 and stock head. I just put a VM26 on. Now I can't get the bike to start. And i'm pouring gas out the over flow. It has a 190 main and 22.5 pilot. Can some one help. And yes i've checked the timing 3 times.

I got it... thank you all!!!!!!!

It was the flywheel key. I almost never found it... The flywheel was moving with the shaft so I still had spark but there for my timing was bad off. That is my luck...

Thanks again to all!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Kyle Cooper

zachvu · 11-01-2009, 03:19 PM

move the clip up the slide a notch at a time to allow less gas in the bowl

pitbike120 · 11-01-2009, 03:22 PM

I have. I have smaller jets. 180, 170, 150. will that help?

Paxracing · 11-01-2009, 03:26 PM

You have gas pouring out the over flow , check the float.

zachvu · 11-01-2009, 03:29 PM

hmmmm...like pax said, check to make sure the float is functioning properly and that the overflow needle isn't sticking?

mutinytattoo · 11-01-2009, 03:29 PM

yea your floats are probably stuck

pitbike120 · 11-01-2009, 03:30 PM

it only pours out when i'm trying to start the bike

pitbike120 · 11-01-2009, 03:32 PM

Quote:

Originally Posted by pitbike120

it only pours out when i'm trying to start the bike

it dont leak when it is just sitting there

pitbike120 · 11-01-2009, 03:55 PM

am i missing something. is my pilot to big. i have bruised my foot kicking this dam thing. and i just checked the float it does not seem to be sticking. i cleaned them and the pin any way. and it seems like it is flooding. I cant get it to do any thing.

Paxracing · 11-01-2009, 03:56 PM

check it for spark

pitbike120 · 11-01-2009, 04:08 PM

Quote:

Originally Posted by Paxracing

check it for spark

yea. I have fuel fire and compression. I bumped the magnet on the flywheel when it was on the lathe. Could this by my problem. it looks like it is not interferring with the pick up.

whippy431 · 11-01-2009, 06:08 PM

this might sound dumb... but could ur cam be backwards... lol...

only say that cuz me n my mechanic did that on my 50 and it sparked n had fuel n kicked.. just would nvr start lol

pitbike120 · 11-01-2009, 06:18 PM

Quote:

Originally Posted by whippy431

this might sound dumb... but could ur cam be backwards... lol...

only say that cuz me n my mechanic did that on my 50 and it sparked n had fuel n kicked.. just would nvr start lol

I have thought about that. I checked it but that dont meen anything. lol but will the cam gear go on if it's backwards. and it is sucking alot of air.

whippy431 · 11-01-2009, 07:42 PM

if its suckin air that prolly ur problem.. where is it suckin air from?

pitbike120 · 11-01-2009, 07:57 PM

its not that it is leaking air. it is sucking real hard through the filter. I've never had a carb sound like that. but I new to this

whippy431 · 11-01-2009, 08:01 PM

idk... im not a mechanic lolz...

im just the rider haha

w650gb500 · 11-01-2009, 09:26 PM

Make sure there is some slack in the throttle cable. If its too tight, it could be holding the slide open.

Just a thought.........................

BORN2RIDE#56 · 11-01-2009, 09:29 PM

Try moving the clip up 1 on the needle...

USERNAME · 11-01-2009, 10:18 PM

Make sure when you put the carb top and slide on that its correctly in the carb. I have done this once or twice and it will not start at all till you make sure that the slide goes all the way in properly. There is a notch on it which makes it sit down further. You have to line it up when you put it on the carb.

Could be this but not sure its worth a try.

USERNAME · 11-01-2009, 10:21 PM

My vm 26mm carb leaks gas out of the overflow when you start it otherwise it stops just so you know.

11-01-2009, 03:14 PM	#1 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Help!!! Me please I have just put in a new race cam from TB in my klx... I have the 143 and stock head. I just put a VM26 on. Now I can't get the bike to start. And i'm pouring gas out the over flow. It has a 190 main and 22.5 pilot. Can some one help. And yes i've checked the timing 3 times. I got it... thank you all!!!!!!! It was the flywheel key. I almost never found it... The flywheel was moving with the shaft so I still had spark but there for my timing was bad off. That is my luck... Thanks again to all!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Kyle Cooper Last edited by pitbike120; 11-04-2009 at 04:34 PM. Reason: got it going

11-01-2009, 03:19 PM	#2 (permalink)
zachvu 1st Gear Member Join Date: Feb 2009 Location: St George, UT Posts: 123 My Mood:	Re: Help!!! Me please move the clip up the slide a notch at a time to allow less gas in the bowl

11-01-2009, 03:22 PM	#3 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Re: Help!!! Me please I have. I have smaller jets. 180, 170, 150. will that help?

11-01-2009, 03:26 PM	#4 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,521 My Mood:	Re: Help!!! Me please You have gas pouring out the over flow , check the float.

11-01-2009, 03:29 PM	#5 (permalink)
zachvu 1st Gear Member Join Date: Feb 2009 Location: St George, UT Posts: 123 My Mood:	Re: Help!!! Me please hmmmm...like pax said, check to make sure the float is functioning properly and that the overflow needle isn't sticking?

11-01-2009, 03:29 PM	#6 (permalink)
mutinytattoo 2nd Gear Member Join Date: Mar 2009 Location: ogden, ut. Posts: 346 My Mood:	Re: Help!!! Me please yea your floats are probably stuck

11-01-2009, 03:30 PM	#7 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Re: Help!!! Me please it only pours out when i'm trying to start the bike

11-01-2009, 03:55 PM	#9 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Re: Help!!! Me please am i missing something. is my pilot to big. i have bruised my foot kicking this dam thing. and i just checked the float it does not seem to be sticking. i cleaned them and the pin any way. and it seems like it is flooding. I cant get it to do any thing.

11-01-2009, 03:56 PM	#10 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,521 My Mood:	Re: Help!!! Me please check it for spark

11-01-2009, 06:08 PM	#12 (permalink)
whippy431 1st Gear Member Join Date: May 2009 Location: Lacombe, LA Posts: 196	Re: Help!!! Me please this might sound dumb... but could ur cam be backwards... lol... only say that cuz me n my mechanic did that on my 50 and it sparked n had fuel n kicked.. just would nvr start lol

11-01-2009, 07:42 PM	#14 (permalink)
whippy431 1st Gear Member Join Date: May 2009 Location: Lacombe, LA Posts: 196	Re: Help!!! Me please if its suckin air that prolly ur problem.. where is it suckin air from?

11-01-2009, 07:57 PM	#15 (permalink)
pitbike120 PM Newbie Join Date: Sep 2009 Location: Silver Point, TN 38582 Posts: 79 My Mood:	Re: Help!!! Me please its not that it is leaking air. it is sucking real hard through the filter. I've never had a carb sound like that. but I new to this

11-01-2009, 08:01 PM	#16 (permalink)
whippy431 1st Gear Member Join Date: May 2009 Location: Lacombe, LA Posts: 196	Re: Help!!! Me please idk... im not a mechanic lolz... im just the rider haha

11-01-2009, 09:26 PM	#17 (permalink)
w650gb500 2nd Gear Member Join Date: Nov 2005 Location: Wilkes-Barre, PA Posts: 458	Re: Help!!! Me please Make sure there is some slack in the throttle cable. If its too tight, it could be holding the slide open. Just a thought.........................

11-01-2009, 09:29 PM	#18 (permalink)
BORN2RIDE#56 3rd Gear Member Join Date: Apr 2008 Location: RIVERSIDE Posts: 3,348 My Mood:	Re: Help!!! Me please Try moving the clip up 1 on the needle...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

11-01-2009, 10:18 PM	#19 (permalink)
USERNAME 2nd Gear Member Join Date: Jul 2006 Location: Monee, IL. Posts: 983	Re: Help!!! Me please Make sure when you put the carb top and slide on that its correctly in the carb. I have done this once or twice and it will not start at all till you make sure that the slide goes all the way in properly. There is a notch on it which makes it sit down further. You have to line it up when you put it on the carb. Could be this but not sure its worth a try.

11-01-2009, 10:21 PM	#20 (permalink)
USERNAME 2nd Gear Member Join Date: Jul 2006 Location: Monee, IL. Posts: 983	Re: Help!!! Me please My vm 26mm carb leaks gas out of the overflow when you start it otherwise it stops just so you know.