Planet Minis

mutinytattoo · 11-05-2009, 07:51 AM

i have a 110. will my axle work on a ktm rear wheel and disc brake setup work on my 110 with no fabing? and cani use my ott brake pedal or do i have to use the ktm one?

223 · 11-05-2009, 08:08 AM

my kltmx build
my kltmx build tenth page very interesting

Busser90
2nd Gear Member
Feedback Score: 0 reviews

Join Date: Jun 2008
Location: Newtown, CT
Posts: 362
Re: my kltmx build

--------------------------------------------------------------------------------

Quote:
Originally Posted by yoyo28gsi
what mod have u do for fit the swingarm on klx frame ?

To get hte KTM swingarm to work you have to cut out the pivot point were the bearings are in the end of the swinger.. after cutting those out. You have to cut the welds on the side of the swing-arm and cut about 1/4 of an inch from the outside edge to the inside edge on each side..

After doing all your cutting you have to bend both sides out (away from eachother) about 3/8-1/2 inch.. then when mocking it together.. the easiest way is to have everything on teh bike.. all put together and make sure your chain and sprockets will line up.. and tack them while its on the bike, making sure you dont melt the plastic peaces that go on the ends..

when i did myn i had put those peaces in the swingarm after cutting them out, and ended up rounding down the edges just so the actual swingarm was holding the pivot point together and made sure it was solid..

Also you have to move the shock mount on the swingarm to the left about 1/2 inch to 3/4 of and inch. but that is fairly easy..

Also i had added a 1/8 inch plate on either side of the shock mount to give it some more beef to hold to and smooth off the top..

The swing-arm conversition isnt bad at all it just takes time and you wanna do it right the first time.

Any more questions, feel free to PM, or email me at Bombsquad250r@Gmail.com

mutinytattoo · 11-05-2009, 08:11 AM

sorry ill be more specific. i have a sano mx swinger and i want to put a ktm rear wheel and brake setup on it. . . wondering how it will work?

223 · 11-05-2009, 08:16 AM

Quote:

Originally Posted by mutinytattoo

sorry ill be more specific. i have a sano mx swinger and i want to put a ktm rear wheel and brake setup on it. . . wondering how it will work?

i dont know how colse it is at all talk too somebody on that theard i linked they always trying that kind of stuff

mutinytattoo · 11-05-2009, 08:28 AM

Quote:

Originally Posted by 223

i dont know how colse it is at all talk too somebody on that theard i linked they always trying that kind of stuff

k well thanks. i sent that guy a pm so hopefully i get some help cause i am wanting to buy this setup asap

mutinytattoo · 11-05-2009, 09:12 AM

if anyone else can help me i would appreciate it, thanks

11-05-2009, 07:51 AM	#1 (permalink)
mutinytattoo 2nd Gear Member Join Date: Mar 2009 Location: ogden, ut. Posts: 342 My Mood:	ktm rear setup on my 110?? i have a 110. will my axle work on a ktm rear wheel and disc brake setup work on my 110 with no fabing? and cani use my ott brake pedal or do i have to use the ktm one? Last edited by mutinytattoo; 11-05-2009 at 07:54 AM.

11-05-2009, 08:08 AM	#2 (permalink)
223 2nd Gear Member Join Date: Jan 2008 Location: oregon Posts: 972 My Mood:	Re: ktm rear setup on my 110?? my kltmx build my kltmx build tenth page very interesting Busser90 2nd Gear Member Feedback Score: 0 reviews Join Date: Jun 2008 Location: Newtown, CT Posts: 362 Re: my kltmx build -------------------------------------------------------------------------------- Quote: Originally Posted by yoyo28gsi what mod have u do for fit the swingarm on klx frame ? To get hte KTM swingarm to work you have to cut out the pivot point were the bearings are in the end of the swinger.. after cutting those out. You have to cut the welds on the side of the swing-arm and cut about 1/4 of an inch from the outside edge to the inside edge on each side.. After doing all your cutting you have to bend both sides out (away from eachother) about 3/8-1/2 inch.. then when mocking it together.. the easiest way is to have everything on teh bike.. all put together and make sure your chain and sprockets will line up.. and tack them while its on the bike, making sure you dont melt the plastic peaces that go on the ends.. when i did myn i had put those peaces in the swingarm after cutting them out, and ended up rounding down the edges just so the actual swingarm was holding the pivot point together and made sure it was solid.. Also you have to move the shock mount on the swingarm to the left about 1/2 inch to 3/4 of and inch. but that is fairly easy.. Also i had added a 1/8 inch plate on either side of the shock mount to give it some more beef to hold to and smooth off the top.. The swing-arm conversition isnt bad at all it just takes time and you wanna do it right the first time. Any more questions, feel free to PM, or email me at Bombsquad250r@Gmail.com

11-05-2009, 08:11 AM	#3 (permalink)
mutinytattoo 2nd Gear Member Join Date: Mar 2009 Location: ogden, ut. Posts: 342 My Mood:	Re: ktm rear setup on my 110?? sorry ill be more specific. i have a sano mx swinger and i want to put a ktm rear wheel and brake setup on it. . . wondering how it will work?

11-05-2009, 09:12 AM	#6 (permalink)
mutinytattoo 2nd Gear Member Join Date: Mar 2009 Location: ogden, ut. Posts: 342 My Mood:	Re: ktm rear setup on my 110?? if anyone else can help me i would appreciate it, thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)