Planet Minis

SunValleyMX · 11-01-2009, 10:40 AM

So ive been building my engine up a little bit with a 143 kit and need some help timing it. I have an inner rotor kit (pretty sure its chinese made) and I was wondering if anyone knows where the timing marks are on it. Ive never done it with any aftermarket ignition system. Heres a pic of it

SunValleyMX · 11-01-2009, 10:42 AM

Or do I just install the head when its at TDC and then line up the mark on the cam gear?

JohnnyB · 11-01-2009, 12:31 PM

I'd check it like this ....

- Remove the crank shaft nut and see where the key way is pointed with the inner rotor ..

- Then where it would be pointed if the stk flywheel were installed ..

If I remember correctly ..., on a honda irk ... The flywheel key way usually points twords the middle of the head .. But .., it may be different with the kawi one is positioned ???

SunValleyMX · 11-01-2009, 02:40 PM

Quote:

Originally Posted by JohnnyB

I'd check it like this ....

- Remove the crank shaft nut and see where the key way is pointed with the inner rotor ..

- Then where it would be pointed if the stk flywheel were installed ..

If I remember correctly ..., on a honda irk ... The flywheel key way usually points twords the middle of the head .. But .., it may be different with the kawi one is positioned ???

Thats a great idea! Luckily I have another 110 in the garage with a stock ignition so I can just pop the cover off, line up the marks, and see where the key way is. Sweet! Thank you

JohnnyB · 11-01-2009, 08:26 PM

Quote:

Originally Posted by SunValleyMX

Thats a great idea! Luckily I have another 110 in the garage with a stock ignition so I can just pop the cover off, line up the marks, and see where the key way is. Sweet! Thank you

No problem .., glad to help out ...

11-01-2009, 10:40 AM	#1 (permalink)
SunValleyMX 2nd Gear Member Join Date: Feb 2009 Location: Queen Creek, AZ Posts: 296 My Mood:	Need some help timing my engine w/ inner rotor So ive been building my engine up a little bit with a 143 kit and need some help timing it. I have an inner rotor kit (pretty sure its chinese made) and I was wondering if anyone knows where the timing marks are on it. Ive never done it with any aftermarket ignition system. Heres a pic of it

11-01-2009, 10:42 AM	#2 (permalink)
SunValleyMX 2nd Gear Member Join Date: Feb 2009 Location: Queen Creek, AZ Posts: 296 My Mood:	Re: Need some help timing my engine w/ inner rotor Or do I just install the head when its at TDC and then line up the mark on the cam gear?

11-01-2009, 12:31 PM	#3 (permalink)
JohnnyB 3rd Gear Member Join Date: Nov 2003 Location: CT . aaaaaah .... heh heh heh .. Posts: 4,929 My Mood:	Re: Need some help timing my engine w/ inner rotor I'd check it like this .... - Remove the crank shaft nut and see where the key way is pointed with the inner rotor .. - Then where it would be pointed if the stk flywheel were installed .. If I remember correctly ..., on a honda irk ... The flywheel key way usually points twords the middle of the head .. But .., it may be different with the kawi one is positioned ???

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)