Planet Minis

firepower354 · 08-21-2009, 01:10 PM

The just-a-little-smaller brother of the 192 is now (*) available at FPM. V2 head, 28mm carb on the trick new rear-facing intake, and a completely gone through needle bearing YX160. Remote oil filter, 6-disk clutch, ignition modded for easier starting and max power. Actual timing light used, even

Everything gets stripped bare, inspected, and carefully assembled. Engines will be test run through the gears, heat cycled, drained and shipped to the buyer.

$1150 shipped (48 states), for a custom built killer.

*I'm booking bench time for mid-September, right now, but have one 184 I can ship late next week.

firepower354 · 08-22-2009, 10:24 PM

$900 shipped with a ported YX stock head and 28mm carb kit. Still gonna rip

50rider340 · 08-23-2009, 09:27 AM

Terry just is unstoppable the guy is a motor making robot machine lol.

klxrider245 · 08-23-2009, 12:07 PM

have you put this motor on the dyno yet?

firepower354 · 08-23-2009, 08:17 PM

Nope, and I won't likely do so...

Without duplicating the exact installed scenario, like pipe, carb, jetting, fuel, air conditions, filter, etc, it's just a number. It's a proven combo, with a nice broad torque curve. You won't likely be pulling the end off throttle cables with this one

kawasakicoby125 · 08-23-2009, 08:24 PM

lol, these motors are unbelivable! haha, i have a friend who wants this for his 50 with zochs, and a billitwear swinger. lol, he will be on his head more than the bike!

up4da4nal · 08-24-2009, 12:12 AM

ordered mineeee

klxrider245 · 08-24-2009, 01:21 PM

wow just might have to go 184 instead of 192, it seems like it be more controlable on the track

firepower354 · 08-24-2009, 01:26 PM

Minor difference in feel, with the 184 coming on a little softer (like getting hit with a baseball bat instead of a lead pipe...) Otherwise, very similar power. 192 has more compression and takes a little more boot sole to fire up. 222 is gonna have to be bumped.lol

up4da4nal · 08-24-2009, 01:26 PM

Quote:

Originally Posted by klxrider245

wow just might have to go 184 instead of 192, it seems like it be more controlable on the track

x2 plus you can go bigger but cant go back to smaller easy

firepower354 · 08-24-2009, 01:29 PM

You can drop as small as 125, or up to 201, without splitting the cases. Different jugs. I just like the 178/184/192 versions best.

The 184 can not be bored further, it needs a jug swap. The 192 can be bored to 66mm (195) for an available piston.

96Justin · 08-24-2009, 01:32 PM

what would shipping to calgary, alberta, canada be on one of your motors? Theres not much of a mini scene here and its tough getting anyone to do motor work around here

firepower354 · 08-24-2009, 01:35 PM

About $90-100 for shipping, USPS Priority.
Sno-Cat mechanics ain't up to wrenching hot rods?

klxrider245 · 08-24-2009, 01:53 PM

Quote:

Originally Posted by up4da4nal

x2 plus you can go bigger but cant go back to smaller easy

huh never heard of that b4? of course you can go smaller if you want lol you just get a smaller bore

MpR · 08-24-2009, 02:13 PM

Quote:

Originally Posted by up4da4nal

x2 plus you can go bigger but cant go back to smaller easy

squid.

doopsx3 · 08-24-2009, 02:19 PM

Quote:

Originally Posted by firepower354

About $90-100 for shipping, USPS Priority.
Sno-Cat mechanics ain't up to wrenching hot rods?

this thing looks more stable in the turns than a 10" bike

96Justin · 08-24-2009, 04:05 PM

haha good ol sno-cats! Those things will chew threw anything, I drove one a few times when I worked at a ski resort here

100 bucks is more than fair, ill be giving you a shout for sure over the winter....id rather give you my money and a get a motor that I know will run properly than take my chances with someone local here

firepower354 · 11-13-2009, 02:34 PM

Here's one, in a MUCH nicer display stand than my Folger's can

It belongs to a customer in the Netherlands. Zoomy, he says

chasetheface123 · 11-13-2009, 02:49 PM

Lookin good terry! Hey I almost came by for a suprise visit today, my dads picking up fam at the airport again..

slimbo · 11-13-2009, 07:31 PM

Quote:

Originally Posted by firepower354

Here's one, in a MUCH nicer display stand than my Folger's can

hope that has some kind of internal disk set up inside those drum brakes... may a parachute for a safety measure...

08-21-2009, 01:10 PM	#1 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 11,002 My Mood:	184 Firepower Crate Motor The just-a-little-smaller brother of the 192 is now () available at FPM. V2 head, 28mm carb on the trick new rear-facing intake, and a completely gone through needle bearing YX160. Remote oil filter, 6-disk clutch, ignition modded for easier starting and max power. Actual timing light used, even Everything gets stripped bare, inspected, and carefully assembled. Engines will be test run through the gears, heat cycled, drained and shipped to the buyer. $1150 shipped (48 states), for a custom built killer. I'm booking bench time for mid-September, right now, but have one 184 I can ship late next week. __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories.

08-22-2009, 10:24 PM	#2 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 11,002 My Mood:	Re: 184 Firepower Crate Motor $900 shipped with a ported YX stock head and 28mm carb kit. Still gonna rip __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories.

08-23-2009, 09:27 AM	#3 (permalink)
50rider340 3rd Gear Member Join Date: Mar 2004 Location: CT Posts: 3,083 My Mood:	Re: 184 Firepower Crate Motor Terry just is unstoppable the guy is a motor making robot machine lol.

08-23-2009, 12:07 PM	#4 (permalink)
klxrider245 3rd Gear Member Join Date: Nov 2004 Location: RIVERSIDE Posts: 1,017	Re: 184 Firepower Crate Motor have you put this motor on the dyno yet?

08-23-2009, 08:17 PM	#5 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 11,002 My Mood:	Re: 184 Firepower Crate Motor Nope, and I won't likely do so... Without duplicating the exact installed scenario, like pipe, carb, jetting, fuel, air conditions, filter, etc, it's just a number. It's a proven combo, with a nice broad torque curve. You won't likely be pulling the end off throttle cables with this one __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories.

08-23-2009, 08:24 PM	#6 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,356 My Mood:	Re: 184 Firepower Crate Motor lol, these motors are unbelivable! haha, i have a friend who wants this for his 50 with zochs, and a billitwear swinger. lol, he will be on his head more than the bike!

08-24-2009, 12:12 AM	#7 (permalink)
up4da4nal 2nd Gear Member Join Date: Dec 2008 Location: killafornia Posts: 442 My Mood:	Re: 184 Firepower Crate Motor ordered mineeee

08-24-2009, 01:21 PM	#8 (permalink)
klxrider245 3rd Gear Member Join Date: Nov 2004 Location: RIVERSIDE Posts: 1,017	Re: 184 Firepower Crate Motor wow just might have to go 184 instead of 192, it seems like it be more controlable on the track

08-24-2009, 01:26 PM	#9 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 11,002 My Mood:	Re: 184 Firepower Crate Motor Minor difference in feel, with the 184 coming on a little softer (like getting hit with a baseball bat instead of a lead pipe...) Otherwise, very similar power. 192 has more compression and takes a little more boot sole to fire up. 222 is gonna have to be bumped.lol __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories.

08-24-2009, 01:29 PM	#11 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 11,002 My Mood:	Re: 184 Firepower Crate Motor You can drop as small as 125, or up to 201, without splitting the cases. Different jugs. I just like the 178/184/192 versions best. The 184 can not be bored further, it needs a jug swap. The 192 can be bored to 66mm (195) for an available piston. __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories. Last edited by firepower354; 08-24-2009 at 01:33 PM.

08-24-2009, 01:32 PM	#12 (permalink)
96Justin 2nd Gear Member Join Date: Jan 2009 Location: Calgary, AB, Canada Posts: 770 My Mood:	Re: 184 Firepower Crate Motor what would shipping to calgary, alberta, canada be on one of your motors? Theres not much of a mini scene here and its tough getting anyone to do motor work around here

08-24-2009, 01:35 PM	#13 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 11,002 My Mood:	Re: 184 Firepower Crate Motor About $90-100 for shipping, USPS Priority. Sno-Cat mechanics ain't up to wrenching hot rods? __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories. Last edited by firepower354; 08-24-2009 at 01:38 PM.

08-24-2009, 04:05 PM	#17 (permalink)
96Justin 2nd Gear Member Join Date: Jan 2009 Location: Calgary, AB, Canada Posts: 770 My Mood:	Re: 184 Firepower Crate Motor haha good ol sno-cats! Those things will chew threw anything, I drove one a few times when I worked at a ski resort here 100 bucks is more than fair, ill be giving you a shout for sure over the winter....id rather give you my money and a get a motor that I know will run properly than take my chances with someone local here

11-13-2009, 02:34 PM	#18 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 11,002 My Mood:	Re: 184 Firepower Crate Motor Here's one, in a MUCH nicer display stand than my Folger's can It belongs to a customer in the Netherlands. Zoomy, he says __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories. Last edited by firepower354; 11-13-2009 at 07:33 PM.

11-13-2009, 02:49 PM	#19 (permalink)
chasetheface123 Chuck Norris for president! Join Date: Nov 2007 Location: Boyne City Michigan Posts: 4,816 My Mood:	Re: 184 Firepower Crate Motor Lookin good terry! Hey I almost came by for a suprise visit today, my dads picking up fam at the airport again..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)