Planet Minis

G2Moto · 06-15-2009, 10:07 AM

I have a few of these front ends available. These are a direct fit for the "standard" China type midsize bikes and will fit the KLX/DRZ 110 with our modified bearing (available for an additional 40.00).
This is a SWEET front end! These fork are very plush and the hub is a very nice looking piece. These are the same froks that our sponsored G2moto racers are using to win.
Priced at 564.00 to move! Shipping is 40.00 (ground)
I'll get these on the website later. Until then, contact me via PM or mike@g2moto.com....Also, matching rear wheel sets are available for an additional 115.00 (15mm axle)

Kit includes:

48mm Fast Ace AS01 USD forks - Each leg is compression and rebound adjustable. Black Titanium Nitride Coated lower Tubes. Comp clickers on the bottom/Rebound clickers at the top (These give forks Zokes a run for the money)
Billet Triple Clamps
14" CNC/Billet Black annodized aluminum hub/spoke/rim wheel
Complete Hydraulic Front Brake system with Small Master Cylinder and lever
210mm Brake rotor
Taper Style Tall Aluminum Fat Bars
Axle/nut
Wheel Spacers
Bearings (Klx conversion bearings 40.00 extra)

G2Moto · 06-15-2009, 08:54 PM

Here's a new short clip of Kyle Davis using this same front end (this past weekend). He's been using the same front end all year and has been up front and hitting everything on the tracks:

Kyle Davis on his G2moto with stock suspension

G2Moto · 06-18-2009, 07:10 AM

2 left! If you are thinking about forks/ front end for less than a grand, this is your answer. These forks are very plush and have a great overall feel.

dirtslammer · 06-23-2009, 07:46 AM

Sweet!....do you have as01s for the r4?

G2Moto · 06-24-2009, 01:54 PM

Quote:

Originally Posted by dirtslammer

Sweet!....do you have as01s for the r4?

No, these only fit the the midsize bikes and the KLX/DRZ 110.

J Pezzy · 06-24-2009, 02:10 PM

Whats the difference between these and the ones Pitster Pro uses? From what I can see they are the same right?

G2Moto · 06-25-2009, 10:28 AM

Quote:

Originally Posted by J Pezzy

Whats the difference between these and the ones Pitster Pro uses? From what I can see they are the same right?

These are not the same as the fork that Pitster uses. I tested several forks when designing the G2moto midsize bike (including the DNMs, ZLs - The fork that most of the other companies use, like Pitster, OGM, SSR, and and few other forks). These forks (as01) were the best that I tested. They were very similiar to zokes in performance.

dirtslammer · 06-27-2009, 07:04 AM

Quote:

Originally Posted by G2Moto

No, these only fit the the midsize bikes and the KLX/DRZ 110.

Ok thanks. Yea, I have these forks on my g2moto R1. They feel as good as the forks on my 250

G2Moto · 06-29-2009, 12:33 PM

Yes, these forks are very nice. For the price, I think they are the best value out there.

Also, the billet/CNC hubs are sweet! They look as nice as hubs that cost hundreds more.

redirt78 · 07-09-2009, 10:09 AM

so the only thing i would need is the $40 bearing kit from you and i can mount to my klx?

G2Moto · 07-10-2009, 05:48 AM

Quote:

Originally Posted by redirt78

so the only thing i would need is the $40 bearing kit from you and i can mount to my klx?

yes....and a tire. Or, you can modify the bearing that comes with the kit at a local machine shop. I charge the 40.00 extra to cover my costs to do the modification.

These forks are sweet!

G2Moto · 09-08-2009, 09:37 PM

I got a few more in...price lowered to 525.00!

jcpitbikes · 09-13-2009, 05:37 PM

Bump for slammin price and a great guy that loves chicken

skipbuysparts · 09-14-2009, 02:38 PM

how much for front end with rear wheel and rear shock shipped to oregon

G2Moto · 09-20-2009, 09:59 PM

Quote:

Originally Posted by skipbuysparts

how much for front end with rear wheel and rear shock shipped to oregon

Skip,
Please give a report when you get your front end installed....I think you're going to like it!
Thanks,
Mike

skipbuysparts · 09-21-2009, 06:15 AM

Quote:

Originally Posted by G2Moto

Skip,
Please give a report when you get your front end installed....I think you're going to like it!
Thanks,
Mike

hi mike I will they are going to be here thursday I should ride by sunday

G2Moto · 01-14-2010, 06:18 AM

I have some more in stock. Priced at 525.00 for a complete front end!

redirt78 · 01-14-2010, 09:24 AM

thanks for getting back to me about the front end setup, still not too sure which way im going to go but i will know shortly. free bump for now

skipbuysparts · 01-14-2010, 12:30 PM

hi mike I still need the seal for my front wheel and I would like to get a set of bearings and races for the head set

thanks

G2Moto · 01-14-2010, 06:31 PM

Redirt - sounds good. I havbe them in stock and ready to go.

Skip, i saw your post in the other thread that you need wheels too.....I can get the bearings and seals out to you with the wheels if you want everything.
Email me at mike@g2moto or pm me and we'll get you set up.
Thanks,
MIke

06-15-2009, 10:07 AM	#1 (permalink)
G2Moto Advertiser Join Date: May 2007 Location: New Jersey Posts: 831	Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes I have a few of these front ends available. These are a direct fit for the "standard" China type midsize bikes and will fit the KLX/DRZ 110 with our modified bearing (available for an additional 40.00). This is a SWEET front end! These fork are very plush and the hub is a very nice looking piece. These are the same froks that our sponsored G2moto racers are using to win. Priced at 564.00 to move! Shipping is 40.00 (ground) I'll get these on the website later. Until then, contact me via PM or mike@g2moto.com....Also, matching rear wheel sets are available for an additional 115.00 (15mm axle) Kit includes: 48mm Fast Ace AS01 USD forks - Each leg is compression and rebound adjustable. Black Titanium Nitride Coated lower Tubes. Comp clickers on the bottom/Rebound clickers at the top (These give forks Zokes a run for the money) Billet Triple Clamps 14" CNC/Billet Black annodized aluminum hub/spoke/rim wheel Complete Hydraulic Front Brake system with Small Master Cylinder and lever 210mm Brake rotor Taper Style Tall Aluminum Fat Bars Axle/nut Wheel Spacers Bearings (Klx conversion bearings 40.00 extra) __________________ www.g2moto.com Last edited by G2Moto; 06-23-2009 at 06:43 PM.

06-15-2009, 08:54 PM	#2 (permalink)
G2Moto Advertiser Join Date: May 2007 Location: New Jersey Posts: 831	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes Here's a new short clip of Kyle Davis using this same front end (this past weekend). He's been using the same front end all year and has been up front and hitting everything on the tracks: Kyle Davis on his G2moto with stock suspension __________________ www.g2moto.com Last edited by G2Moto; 06-18-2009 at 07:02 AM.

06-18-2009, 07:10 AM	#3 (permalink)
G2Moto Advertiser Join Date: May 2007 Location: New Jersey Posts: 831	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes 2 left! If you are thinking about forks/ front end for less than a grand, this is your answer. These forks are very plush and have a great overall feel. __________________ www.g2moto.com

06-23-2009, 07:46 AM	#4 (permalink)
dirtslammer PM Newbie Join Date: Sep 2007 Posts: 82	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes Sweet!....do you have as01s for the r4?

06-24-2009, 02:10 PM	#6 (permalink)
J Pezzy 3rd Gear Member Join Date: Oct 2008 Location: vancouver Wa Posts: 1,171	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes Whats the difference between these and the ones Pitster Pro uses? From what I can see they are the same right?

06-29-2009, 12:33 PM	#9 (permalink)
G2Moto Advertiser Join Date: May 2007 Location: New Jersey Posts: 831	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes Yes, these forks are very nice. For the price, I think they are the best value out there. Also, the billet/CNC hubs are sweet! They look as nice as hubs that cost hundreds more. __________________ www.g2moto.com

07-09-2009, 10:09 AM	#10 (permalink)
redirt78 3rd Gear Member Join Date: May 2009 Location: Dry Branch, Georgia.... off in the cut Posts: 1,382	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes so the only thing i would need is the $40 bearing kit from you and i can mount to my klx?

09-08-2009, 09:37 PM	#12 (permalink)
G2Moto Advertiser Join Date: May 2007 Location: New Jersey Posts: 831	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes I got a few more in...price lowered to 525.00! __________________ www.g2moto.com

09-13-2009, 05:37 PM	#13 (permalink)
jcpitbikes 1st Gear Member Join Date: Dec 2005 Posts: 110	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes Bump for slammin price and a great guy that loves chicken

09-14-2009, 02:38 PM	#14 (permalink)
skipbuysparts 1st Gear Member Join Date: Feb 2009 Location: coos bay oregon Posts: 138 My Mood:	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes how much for front end with rear wheel and rear shock shipped to oregon

01-14-2010, 06:18 AM	#17 (permalink)
G2Moto Advertiser Join Date: May 2007 Location: New Jersey Posts: 831	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes I have some more in stock. Priced at 525.00 for a complete front end! __________________ www.g2moto.com

01-14-2010, 09:24 AM	#18 (permalink)
redirt78 3rd Gear Member Join Date: May 2009 Location: Dry Branch, Georgia.... off in the cut Posts: 1,382	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes thanks for getting back to me about the front end setup, still not too sure which way im going to go but i will know shortly. free bump for now

01-14-2010, 12:30 PM	#19 (permalink)
skipbuysparts 1st Gear Member Join Date: Feb 2009 Location: coos bay oregon Posts: 138 My Mood:	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes hi mike I still need the seal for my front wheel and I would like to get a set of bearings and races for the head set thanks

01-14-2010, 06:31 PM	#20 (permalink)
G2Moto Advertiser Join Date: May 2007 Location: New Jersey Posts: 831	Re: Complete Front End Kits - AS01/Billet hub for China Midsize/KLX/DRZ110 bikes Redirt - sounds good. I havbe them in stock and ready to go. Skip, i saw your post in the other thread that you need wheels too.....I can get the bearings and seals out to you with the wheels if you want everything. Email me at mike@g2moto or pm me and we'll get you set up. Thanks, MIke __________________ www.g2moto.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)