Planet Minis

kawasakicoby125 · 10-28-2009, 10:12 PM

it was stuck in my intake valve cover. it has threads, and at the in the end it has a notch. i never ran the v2, just put it on, turned the motor ovrer by hand to find out that my stock yx piston doesnt clear. what do u guys think it is. i cant figure it out. its not the tapped adjuster, both are still in the head.

firepower354 · 10-28-2009, 10:15 PM

Busted tappet adjuster. Used head? Somebody not telling you something about it's past?

Matified · 10-28-2009, 10:17 PM

If the valves hit, there IS something wrong, either it has a s25 cam, or something broken.

a V2 will clear the stock pitson with the supplied cam

Matified · 10-28-2009, 10:18 PM

I have seen this happen many times, when the nut comes loose and is ran , the adjuster backs out , hits the cover enough times and breaks, the owner loses power , sees the problem and fixes it, most find all the parts before running it.

kawasakicoby125 · 10-28-2009, 10:18 PM

there both in there fpm.

dougtrip · 10-28-2009, 10:19 PM

yea with the stock v2 cam you should be clear to go but that is definately a rocker adjuster

kawasakicoby125 · 10-28-2009, 10:20 PM

Quote:

Originally Posted by Matified

If the valves hit, there IS something wrong, either it has a s25 cam, or something broken.

what is wrong with it? even if it had an s25 why would what ever it was break. used for like 3 motos, and no decomp

kawasakicoby125 · 10-28-2009, 10:21 PM

just to clarify, the rocker adjuster is the adjuster at the top of the valve spring right?

Matified · 10-28-2009, 10:30 PM

Quote:

Originally Posted by kawasakicoby125

what is wrong with it? even if it had an s25 why would what ever it was break. used for like 3 motos, and no decomp

an s25 will be close , some have cleared some will not??,

IF both of your adjusters are there, this was from an earlier failure and somehow it finally came to a head (pun intended)

kawasakicoby125 · 10-28-2009, 10:31 PM

haha. ok ill ask chasetheface again what cam it has in it.

Matified · 10-28-2009, 10:32 PM

Quote:

Originally Posted by kawasakicoby125

just to clarify, the rocker adjuster is the adjuster at the top of the valve spring right?

yes, and they both should have the tops with the slot in them.

Xare50 · 10-28-2009, 10:33 PM

yup sometime called set screw heres were it sould be this is a square headded
crf50 type but you'll get the idea
http://www.cyclepedia.com/wp-content...8/crf50_62.jpg

kawasakicoby125 · 10-28-2009, 10:34 PM

ok. those are both in there. so i guess it was from before

AngryDirtbikers17 · 10-29-2009, 12:43 AM

whats it taste like

cetris · 10-29-2009, 06:45 AM

Kinda like chicken, only oilier.

Quote:

Originally Posted by AngryDirtbikers17

whats it taste like

firepower354 · 10-29-2009, 07:51 AM

Quote:

Originally Posted by kawasakicoby125

haha. ok ill ask chasetheface again what cam it has in it.

Ahhhhh, pretty sure we got this one figured out.
I mailed Chase a couple YX adjusters last week...

kawasakicoby125 · 10-29-2009, 08:00 AM

i bought the head from him on the 10th. i dont know what it is

chasetheface123 · 10-30-2009, 05:07 PM

Unless i dropped this in there somehow........... With my luck, make sure theirs nothing else in there...

Blackwoodz · 10-30-2009, 05:15 PM

Quote:

Originally Posted by chasetheface123

Unless i dropped this in there somehow........... With my luck, make sure theirs nothing else in there...

How could you not know you lost a tappet?
No wonder you were in such a hurry to sell that head...

chasetheface123 · 10-30-2009, 05:19 PM

Quote:

Originally Posted by Blackwoodz

How could you not know you lost a tappet?
No wonder you were in such a hurry to sell that head...

Im not on here to sell people **** or scam them by any means. Hell i cant even remember what i ate for lunch yesterday! My dad checked over the head and got it all boxed up so he may have something to do with it, but im not pointing any fingers. I pm'd coby tho.

10-28-2009, 10:12 PM	#1 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,357 My Mood:	Found this in my v2, what is it? it was stuck in my intake valve cover. it has threads, and at the in the end it has a notch. i never ran the v2, just put it on, turned the motor ovrer by hand to find out that my stock yx piston doesnt clear. what do u guys think it is. i cant figure it out. its not the tapped adjuster, both are still in the head.

10-28-2009, 10:15 PM	#2 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 11,005 My Mood:	Re: Found this in my v2, what is it? Busted tappet adjuster. Used head? Somebody not telling you something about it's past? __________________ If it has my name on it I did it;) FirepowerMinis.com Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Pitster/Piranha/Thumpstar bikes, parts, engines and accessories. Last edited by firepower354; 10-29-2009 at 07:49 AM.

10-28-2009, 10:17 PM	#3 (permalink)
Matified Pitster Employee Join Date: Feb 2008 Location: USA Posts: 1,888	Re: Found this in my v2, what is it? If the valves hit, there IS something wrong, either it has a s25 cam, or something broken. a V2 will clear the stock pitson with the supplied cam Last edited by Matified; 10-28-2009 at 10:24 PM.

10-28-2009, 10:18 PM	#4 (permalink)
Matified Pitster Employee Join Date: Feb 2008 Location: USA Posts: 1,888	Re: Found this in my v2, what is it? I have seen this happen many times, when the nut comes loose and is ran , the adjuster backs out , hits the cover enough times and breaks, the owner loses power , sees the problem and fixes it, most find all the parts before running it. Last edited by Matified; 10-28-2009 at 11:08 PM.

10-28-2009, 10:18 PM	#5 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,357 My Mood:	Re: Found this in my v2, what is it? there both in there fpm.

10-28-2009, 10:19 PM	#6 (permalink)
dougtrip 3rd Gear Member Join Date: Dec 2005 Location: North East Ohio Posts: 1,919	Re: Found this in my v2, what is it? yea with the stock v2 cam you should be clear to go but that is definately a rocker adjuster

10-28-2009, 10:21 PM	#8 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,357 My Mood:	Re: Found this in my v2, what is it? just to clarify, the rocker adjuster is the adjuster at the top of the valve spring right?

10-28-2009, 10:31 PM	#10 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,357 My Mood:	Re: Found this in my v2, what is it? haha. ok ill ask chasetheface again what cam it has in it.

10-28-2009, 10:33 PM	#12 (permalink)
Xare50 2nd Gear Member Join Date: Apr 2009 Location: stockton Posts: 403 My Mood:	Re: Found this in my v2, what is it? yup sometime called set screw heres were it sould be this is a square headded crf50 type but you'll get the idea http://www.cyclepedia.com/wp-content...8/crf50_62.jpg

10-28-2009, 10:34 PM	#13 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,357 My Mood:	Re: Found this in my v2, what is it? ok. those are both in there. so i guess it was from before

10-29-2009, 12:43 AM	#14 (permalink)
AngryDirtbikers17 1st Gear Member Join Date: Aug 2008 Location: manchester,NH Posts: 221	Re: Found this in my v2, what is it? whats it taste like

10-29-2009, 08:00 AM	#17 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,357 My Mood:	Re: Found this in my v2, what is it? i bought the head from him on the 10th. i dont know what it is

10-30-2009, 05:07 PM	#18 (permalink)
chasetheface123 Chuck Norris for president! Join Date: Nov 2007 Location: Boyne City Michigan Posts: 4,817 My Mood:	Re: Found this in my v2, what is it? Unless i dropped this in there somehow........... With my luck, make sure theirs nothing else in there...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)