Planet Minis

leirhiht · 11-01-2009, 02:17 PM

hi i have a crf50 frame with a brand new 86cc engine, i bought a 1/4 turn throttle for it and i was wondering if someone could take a look at this pic.
my question should the throttle valve be sitting as high as it is?

the pic is kinda bad. but the throttle vale is black if you can see that....thats how it sits when throttle isnt twisted...

doopsx3 · 11-01-2009, 02:21 PM

looks like u need a longer cable

leirhiht · 11-01-2009, 02:33 PM

Quote:

Originally Posted by doopsx3

looks like u need a longer cable

i cant start it up right now so i dont know how itll work like this. how far should that throttle valve be to the bottom of the carb?

507 brett · 11-01-2009, 02:38 PM

try taking it out and turning it 180 degrees. there should be a groove on one side and a slit on the other.. the groove goes all the way down the slide and shout line up with an alignment tab on the inside of the carb. the slit lines up with the idle screw inside the carb. when they are switched (or when the slides turned wrong) the tab holds the slide up.

leirhiht · 11-01-2009, 02:41 PM

Quote:

Originally Posted by 507 brett

try taking it out and turning it 180 degrees. there should be a groove on one side and a slit on the other.. the groove goes all the way down the slide and shout line up with an alignment tab on the inside of the carb. the slit lines up with the idle screw inside the carb. when they are switched (or when the slides turned wrong) the tab holds the slide up.

ya i tried that earlier, didnt work unfortunetly.the place i bought the cable and throttle from said it would work for my carb....sux

but i still havent started it yet, its not all ready. but just by looking at it, its not supposed to be like that right??

11-01-2009, 02:17 PM	#1 (permalink)
leirhiht 1st Gear Member Join Date: Sep 2009 Location: DALLAS, TEXAS Posts: 107	throttle help hi i have a crf50 frame with a brand new 86cc engine, i bought a 1/4 turn throttle for it and i was wondering if someone could take a look at this pic. my question should the throttle valve be sitting as high as it is? the pic is kinda bad. but the throttle vale is black if you can see that....thats how it sits when throttle isnt twisted... Attached Thumbnails

11-01-2009, 02:21 PM	#2 (permalink)
doopsx3 3rd Gear Member Join Date: Aug 2008 Location: San Diego Posts: 3,926 My Mood:	Re: throttle help looks like u need a longer cable

11-01-2009, 02:38 PM	#4 (permalink)
507 brett 3rd Gear Member Join Date: Jan 2007 Location: mt. pleasant, NC Posts: 2,406	Re: throttle help try taking it out and turning it 180 degrees. there should be a groove on one side and a slit on the other.. the groove goes all the way down the slide and shout line up with an alignment tab on the inside of the carb. the slit lines up with the idle screw inside the carb. when they are switched (or when the slides turned wrong) the tab holds the slide up.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)