Planet Minis

85atc70 · 06-07-2009, 09:56 PM

So i newly acquired an 06 ttr50 and was wondering good places to get parts.
What were the best...
Who had some....
Do any parts interchange with a crf.....
And anything else i should know about this bike....
Is the kickstart conversion good? The electric start is super heavy..!

YFZRider69 · 06-08-2009, 07:06 PM

There is a kick start kit for it but it is way expensive. There around 350-400. It only saves a couple of pounds. I don't think it's worth it for the price but that's my opinion. I have the gytr exhaust with the jet kit and it made quite a big difference. I also have a clamp on k&n.

85atc70 · 06-08-2009, 07:36 PM

what size is your filter?
Do these things have any bottom end?
What pipe? Is the k&n better then the gytr foam filter? This bike is more for top end, but no wheelies!

lol
Back to the crf haha
What should i check on the bike?

YFZRider69 · 06-08-2009, 07:40 PM

I can't remember the part number for the air filter but it is the same size as the one used on the crf. Just look on ebay. I got mine for like 24 bucks for a brand new one. I have the gytr and it made a good difference from stock. My cousin has a crf and I dust him. There are quite a few different exhausts that you can get for the ttr. Just depends on what brand you like.

85atc70 · 06-08-2009, 08:04 PM

ill go gytr just cuz i can...

lol i love yammies
But what exhaust will give the best bottom end? I ordered the gytr graphics and i got some blue rims on the way. Just need a bigger main jet, pipe, bars and filter. It will be ready.
How hard is it to get the ttr90 forks on..?

YFZRider69 · 06-08-2009, 08:07 PM

The gytr exhaust gave me a pretty good bottom end compared to stock. I haven't tried to put the ttr90 forks on. I just put stiffer springs on the front and back until I can get a different shock and forks. I would get the gytr jet kit. I got mine off of ebay for about 30 bucks, it comes with the main jets and a different needle. The stock needle isn't adjustable. And for bars I am pretty sure the triple clamp for the crf is the same as the ttr. I would look in the crf parts section and pick up some stuff from there.

85atc70 · 06-08-2009, 08:11 PM

can you wheelie with whatever set up you have?
Cool, i have a crf clamp, just need bars.
How many jets are in that kit?

YFZRider69 · 06-08-2009, 08:12 PM

Ya I can wheelie the way it is. I think it comes with 4 main jets and the needle.

85atc70 · 06-08-2009, 08:17 PM

so gimme the rundown on your bike as it currently sits please...lol
I need something to mold mine like

YFZRider69 · 06-08-2009, 08:22 PM

I have gytr exhaust, k&n filter, gytr jet kit, gytr skid plate, gytr chain guide, gytr timing cover, gytr tappet covers, gytr tall bar kit, gytr stiffer springs for front and back, and I just put some new starcross tires on it. Here is a picture minus the tires. I just put them on today. It also doesn't have the gytr stuff on the motor. These pictures were taken a while ago.

85atc70 · 06-08-2009, 08:33 PM

your bike is sexy! no homo doe. lol
Mine will never be that clean. But pretty close lol. I love that exhaust...
Whered you get it?

YFZRider69 · 06-08-2009, 08:34 PM

I got it from the local bike shop. They have a closeout closet and that's where I got all the gytr stuff from. The exhaust was normally 270 and I got it for 120. I got about 650 bucks worth of gytr stuff for about 230 dollars. Everything was at least half off. And they were running a sale where there was no sales tax. So it was a great deal.

85atc70 · 06-08-2009, 08:37 PM

god you got lucky.
I guess ebays my best bet. Crf exhausts wont fit it?

YFZRider69 · 06-08-2009, 08:38 PM

I think you can put a crf exhaust on but you have to do some modifying. I would just get a ttr exhaust. It looks a lot better with the new tires. The stock ones are ugly.

85atc70 · 06-08-2009, 08:58 PM

its still really nice. you still have the e-start?

YFZRider69 · 06-08-2009, 08:59 PM

Ya I still have the e-start. The kicker is to expensive for me to justify getting one. I would rather put a big bore kit or something else on it for more power.

85atc70 · 06-08-2009, 09:57 PM

Sweet. So really just a filter and pipe fix the bottom end lacking?

YFZRider69 · 06-08-2009, 09:58 PM

Ya it made a pretty good difference. I would get the jet kit to. The needle that comes with it is adjustable and the stock one isn't.

85atc70 · 06-08-2009, 10:04 PM

just ordered it along with the gytr filter...

YFZRider69 · 06-08-2009, 10:06 PM

Right on. I think the 2 brothers exhaust are pretty good to, as well as the yoshimura. Just preference on what brand you like. I wanted to gytr mine out that's why I went with that one. I need to order a new backfender, when I do it will be getting some new graphics. I found some pretty nice One industries DC graphics with a seat cover for 65 bucks on ebay.

06-07-2009, 09:56 PM	#1 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	compatibility between ttr50 and....? So i newly acquired an 06 ttr50 and was wondering good places to get parts. What were the best... Who had some.... Do any parts interchange with a crf..... And anything else i should know about this bike.... Is the kickstart conversion good? The electric start is super heavy..! Last edited by 85atc70; 06-08-2009 at 07:36 PM.

06-08-2009, 07:06 PM	#2 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? There is a kick start kit for it but it is way expensive. There around 350-400. It only saves a couple of pounds. I don't think it's worth it for the price but that's my opinion. I have the gytr exhaust with the jet kit and it made quite a big difference. I also have a clamp on k&n.

06-08-2009, 07:36 PM	#3 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	Re: compatibility between ttr50 and....? what size is your filter? Do these things have any bottom end? What pipe? Is the k&n better then the gytr foam filter? This bike is more for top end, but no wheelies! lol Back to the crf haha What should i check on the bike?

06-08-2009, 07:40 PM	#4 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? I can't remember the part number for the air filter but it is the same size as the one used on the crf. Just look on ebay. I got mine for like 24 bucks for a brand new one. I have the gytr and it made a good difference from stock. My cousin has a crf and I dust him. There are quite a few different exhausts that you can get for the ttr. Just depends on what brand you like.

06-08-2009, 08:04 PM	#5 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	Re: compatibility between ttr50 and....? ill go gytr just cuz i can... lol i love yammies But what exhaust will give the best bottom end? I ordered the gytr graphics and i got some blue rims on the way. Just need a bigger main jet, pipe, bars and filter. It will be ready. How hard is it to get the ttr90 forks on..?

06-08-2009, 08:07 PM	#6 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? The gytr exhaust gave me a pretty good bottom end compared to stock. I haven't tried to put the ttr90 forks on. I just put stiffer springs on the front and back until I can get a different shock and forks. I would get the gytr jet kit. I got mine off of ebay for about 30 bucks, it comes with the main jets and a different needle. The stock needle isn't adjustable. And for bars I am pretty sure the triple clamp for the crf is the same as the ttr. I would look in the crf parts section and pick up some stuff from there.

06-08-2009, 08:11 PM	#7 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	Re: compatibility between ttr50 and....? can you wheelie with whatever set up you have? Cool, i have a crf clamp, just need bars. How many jets are in that kit?

06-08-2009, 08:12 PM	#8 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? Ya I can wheelie the way it is. I think it comes with 4 main jets and the needle.

06-08-2009, 08:17 PM	#9 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	Re: compatibility between ttr50 and....? so gimme the rundown on your bike as it currently sits please...lol I need something to mold mine like

06-08-2009, 08:22 PM	#10 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? I have gytr exhaust, k&n filter, gytr jet kit, gytr skid plate, gytr chain guide, gytr timing cover, gytr tappet covers, gytr tall bar kit, gytr stiffer springs for front and back, and I just put some new starcross tires on it. Here is a picture minus the tires. I just put them on today. It also doesn't have the gytr stuff on the motor. These pictures were taken a while ago.

06-08-2009, 08:33 PM	#11 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	Re: compatibility between ttr50 and....? your bike is sexy! no homo doe. lol Mine will never be that clean. But pretty close lol. I love that exhaust... Whered you get it?

06-08-2009, 08:34 PM	#12 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? I got it from the local bike shop. They have a closeout closet and that's where I got all the gytr stuff from. The exhaust was normally 270 and I got it for 120. I got about 650 bucks worth of gytr stuff for about 230 dollars. Everything was at least half off. And they were running a sale where there was no sales tax. So it was a great deal.

06-08-2009, 08:37 PM	#13 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	Re: compatibility between ttr50 and....? god you got lucky. I guess ebays my best bet. Crf exhausts wont fit it?

06-08-2009, 08:38 PM	#14 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? I think you can put a crf exhaust on but you have to do some modifying. I would just get a ttr exhaust. It looks a lot better with the new tires. The stock ones are ugly.

06-08-2009, 08:58 PM	#15 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	Re: compatibility between ttr50 and....? its still really nice. you still have the e-start?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

06-08-2009, 08:59 PM	#16 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? Ya I still have the e-start. The kicker is to expensive for me to justify getting one. I would rather put a big bore kit or something else on it for more power.

06-08-2009, 09:57 PM	#17 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	Re: compatibility between ttr50 and....? Sweet. So really just a filter and pipe fix the bottom end lacking?

06-08-2009, 09:58 PM	#18 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? Ya it made a pretty good difference. I would get the jet kit to. The needle that comes with it is adjustable and the stock one isn't.

06-08-2009, 10:04 PM	#19 (permalink)
85atc70 2nd Gear Member Join Date: Jun 2008 Location: Tucson, AZ Posts: 482	Re: compatibility between ttr50 and....? just ordered it along with the gytr filter...

06-08-2009, 10:06 PM	#20 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 62 My Mood:	Re: compatibility between ttr50 and....? Right on. I think the 2 brothers exhaust are pretty good to, as well as the yoshimura. Just preference on what brand you like. I wanted to gytr mine out that's why I went with that one. I need to order a new backfender, when I do it will be getting some new graphics. I found some pretty nice One industries DC graphics with a seat cover for 65 bucks on ebay.