Planet Minis

dragginmytaco · 10-12-2009, 07:54 PM

will crf50 tall bar kits work on my 06 ttr50? if not where is the best place to get tall bars for it?

R3CKL3SS · 10-12-2009, 08:04 PM

im not sure. you can find bars here http://www.faster-minis.com/minibike_parts_ttr50.html or ebay

YFZRider69 · 10-12-2009, 08:24 PM

Ya, the crf tripple clamp is the same as the ttr. So you can buy either kit.

dragginmytaco · 10-12-2009, 08:52 PM

he!! yeh..thanks bro thats all i needed to know..i like this forum already..ya'll are fast to respond..will alot of the crf parts swap over to the ttr?

.kyle · 10-13-2009, 04:56 AM

Quote:

Originally Posted by dragginmytaco

he!! yeh..thanks bro thats all i needed to know..i like this forum already..ya'll are fast to respond..will alot of the crf parts swap over to the ttr?

You asked the question for me. lol

Would love a ttr50, just a shame there aren't many parts for them - unless it turns out a fair few crf50 parts will fit.

Might be worth asking in the crf50 section as well, maybe?

dragginmytaco · 10-13-2009, 08:47 PM

maybe so..figured some1 with a ttr had tryed it since the crf and xr parts are soo easy to find..

TTR50E · 10-13-2009, 09:51 PM

+1. A list of what popular mods can be swapped between the CRF and TTR would be AWESOME!!! I am afraid this might be as hard as finding a "Ford/Chevy" guy though

.

ttrfiddy-racer · 10-15-2009, 09:19 PM

no they wont fit if you want the electric start to work also because it is connected to the throttle and the crf doesnt have one, unless u wanna to the ol push n' start it wont work

justjeeps · 10-15-2009, 10:09 PM

its not hard to solder two wires to a kill switch

ttrfiddy-racer · 10-15-2009, 11:52 PM

i was jjust sayin,

dragginmytaco · 10-17-2009, 09:42 AM

yeh im sure its not too hard to wire up a momentary toggle or zip-tie a little push button to it somewhere..i got a chance to look at a crf and a ttr side by side and alot of it looks as if it would swap fairly easily..

YFZRider69 · 10-27-2009, 03:35 PM

Quote:

Originally Posted by ttrfiddy-racer

no they wont fit if you want the electric start to work also because it is connected to the throttle and the crf doesnt have one, unless u wanna to the ol push n' start it wont work

Yes they will fit. The electric start is hooked to the brake not the throttle and the tall bar kit comes with a new cable. I did it and it worked fine.

crf50187 · 10-27-2009, 03:55 PM

Quote:

Originally Posted by dragginmytaco

he!! yeh..thanks bro thats all i needed to know..i like this forum already..ya'll are fast to respond..will alot of the crf parts swap over to the ttr?

I know the motors wont swap but I heard they make a conversion kit for the front fender to make it in to two pieces, and check out gytr.

YFZRider69 · 10-27-2009, 03:56 PM

There is a guy that sells the conversion kit on ebay for about 35 bucks, it comes with the bracket, number plate and a front fender.

10-12-2009, 07:54 PM	#1 (permalink)
dragginmytaco PM Newbie Join Date: Oct 2009 Location: picayune MS Posts: 6	tall bars will crf50 tall bar kits work on my 06 ttr50? if not where is the best place to get tall bars for it?

10-12-2009, 08:04 PM	#2 (permalink)
R3CKL3SS 2nd Gear Member Join Date: Aug 2009 Location: PA NY Posts: 463 My Mood:	Re: tall bars im not sure. you can find bars here http://www.faster-minis.com/minibike_parts_ttr50.html or ebay

10-12-2009, 08:24 PM	#3 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 61 My Mood:	Re: tall bars Ya, the crf tripple clamp is the same as the ttr. So you can buy either kit.

10-12-2009, 08:52 PM	#4 (permalink)
dragginmytaco PM Newbie Join Date: Oct 2009 Location: picayune MS Posts: 6	Re: tall bars he!! yeh..thanks bro thats all i needed to know..i like this forum already..ya'll are fast to respond..will alot of the crf parts swap over to the ttr?

10-13-2009, 08:47 PM	#6 (permalink)
dragginmytaco PM Newbie Join Date: Oct 2009 Location: picayune MS Posts: 6	Re: tall bars maybe so..figured some1 with a ttr had tryed it since the crf and xr parts are soo easy to find..

10-13-2009, 09:51 PM	#7 (permalink)
TTR50E PM Newbie Join Date: Oct 2009 Location: Aliso Viejo, CA Posts: 18 My Mood:	Re: tall bars +1. A list of what popular mods can be swapped between the CRF and TTR would be AWESOME!!! I am afraid this might be as hard as finding a "Ford/Chevy" guy though.

10-15-2009, 09:19 PM	#8 (permalink)
ttrfiddy-racer PM Newbie Join Date: Oct 2009 Location: kentucky Posts: 38 My Mood:	Re: tall bars no they wont fit if you want the electric start to work also because it is connected to the throttle and the crf doesnt have one, unless u wanna to the ol push n' start it wont work

10-15-2009, 10:09 PM	#9 (permalink)
justjeeps PM Newbie Join Date: Jan 2009 Location: Australia Posts: 24 My Mood:	Re: tall bars its not hard to solder two wires to a kill switch

10-15-2009, 11:52 PM	#10 (permalink)
ttrfiddy-racer PM Newbie Join Date: Oct 2009 Location: kentucky Posts: 38 My Mood:	Re: tall bars i was jjust sayin,

10-17-2009, 09:42 AM	#11 (permalink)
dragginmytaco PM Newbie Join Date: Oct 2009 Location: picayune MS Posts: 6	Re: tall bars yeh im sure its not too hard to wire up a momentary toggle or zip-tie a little push button to it somewhere..i got a chance to look at a crf and a ttr side by side and alot of it looks as if it would swap fairly easily..

10-27-2009, 03:56 PM	#14 (permalink)
YFZRider69 PM Newbie Join Date: Mar 2009 Location: Puyallup, Washington Posts: 61 My Mood:	Re: tall bars There is a guy that sells the conversion kit on ebay for about 35 bucks, it comes with the bracket, number plate and a front fender.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)