Planet Minis

kxrider425 · 09-15-2009, 04:55 PM

Man my ttr 125 is officially unridable now. My track is like beach sand (mini southwick haha) and the bike is slow anyways (like 7-8 horsepower) and with the engine the way it is performing its even worse. I dont know what exactly it is. I need a top end because compared to a friends ttr125 its super super slow, so I will probably just get the bbr150 kit. Or used if anyone has one?

Heres my other problem: There is no power (maybe like 2 hp) whenever I am feathering the clutch or 5 seconds after I let the clutch out. The power kicks in later. Its just like its slipping the WHOLE god damn time. I am sick and tired of it and I think it just needs new plates but I am not sure. Does anyone have a link of what I need?!

Thanks!

Oh and one more little problem, I have no clue how to put this stuff on...but I am not going to pay to have someone install it its not a race bike.

kawasakicoby125 · 09-15-2009, 05:10 PM

is there any ticking or a sound that might make you thing there is a chink of metal down there? like the basket broke. u might just have to open it up and take a look see.

yzrcr73 · 09-15-2009, 05:24 PM

sounds like clutch to me

kxrider425 · 09-15-2009, 06:49 PM

Quote:

Originally Posted by kawasakicoby125

is there any ticking or a sound that might make you thing there is a chink of metal down there? like the basket broke. u might just have to open it up and take a look see.

No I dont think so. Even if I pull the gas full throttle it seems like the power doesnt come right away. It just revs.

kawasakicoby125 · 09-15-2009, 06:49 PM

thats all clutch. springs and plates.

kxrider425 · 09-15-2009, 07:08 PM

Quote:

Originally Posted by kawasakicoby125

thats all clutch. springs and plates.

Ok thanks....I am looking at the barnet clutch kit. So just the plates and springs? How hard is it ot put in?

Also I am going to put the bbr150 kit in there and the lightened flywheel. Anything else I should do while I have the engine open. I ride this thing really really hard btw.

Any info or instructions how to do all this?

kawasakicoby125 · 09-15-2009, 07:14 PM

It sounds like the springs and plates. Possibly the pressure plate, but u have to open it up to see. When ur in there make sure your crank is in good condition, top ends arent very hard, its probabuly the same as any pitbike motor, except you will need to take the motor out and tip in on its side so when you take the cam chain off it doest fall into the cases. Just be careful. Shouldnt be too hard.

09-15-2009, 04:55 PM	#1 (permalink)
kxrider425 3rd Gear Member Join Date: Mar 2009 Location: Arroyo Grande, California Posts: 1,187 My Mood:	TTR 125 dying on me Man my ttr 125 is officially unridable now. My track is like beach sand (mini southwick haha) and the bike is slow anyways (like 7-8 horsepower) and with the engine the way it is performing its even worse. I dont know what exactly it is. I need a top end because compared to a friends ttr125 its super super slow, so I will probably just get the bbr150 kit. Or used if anyone has one? Heres my other problem: There is no power (maybe like 2 hp) whenever I am feathering the clutch or 5 seconds after I let the clutch out. The power kicks in later. Its just like its slipping the WHOLE god damn time. I am sick and tired of it and I think it just needs new plates but I am not sure. Does anyone have a link of what I need?! Thanks! Oh and one more little problem, I have no clue how to put this stuff on...but I am not going to pay to have someone install it its not a race bike.

09-15-2009, 05:10 PM	#2 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,355 My Mood:	Re: TTR 125 dying on me is there any ticking or a sound that might make you thing there is a chink of metal down there? like the basket broke. u might just have to open it up and take a look see.

09-15-2009, 05:24 PM	#3 (permalink)
yzrcr73 1st Gear Member Join Date: Aug 2008 Location: Straight out of Mahwah,NJ Posts: 241 My Mood:	Re: TTR 125 dying on me sounds like clutch to me

09-15-2009, 06:49 PM	#5 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,355 My Mood:	Re: TTR 125 dying on me thats all clutch. springs and plates.

09-15-2009, 07:14 PM	#7 (permalink)
kawasakicoby125 3rd Gear Member Join Date: Jul 2008 Location: Lynnwood, WA Posts: 2,355 My Mood:	Re: TTR 125 dying on me It sounds like the springs and plates. Possibly the pressure plate, but u have to open it up to see. When ur in there make sure your crank is in good condition, top ends arent very hard, its probabuly the same as any pitbike motor, except you will need to take the motor out and tip in on its side so when you take the cam chain off it doest fall into the cases. Just be careful. Shouldnt be too hard.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)