Planet Minis

jigracing · 11-01-2009, 10:23 AM

First ten bikes posted get in. (12" rear wheel only)
(this is the last MOTM for 09, December will be Midsize of the Year voting)

KLJ#24 · 11-01-2009, 10:58 AM

MOFF SFR 150 SM

Engine setup:
New model Yx150
TB V2 racehead with a Takegawa S35 cam
TB Rear facing inlet manifold
Mikuni VM26 carb
Doma 94db exhaust system.

Chassis:
Marzoochi shiver replica Forks
Fastace Rearshock
Mobster Tubeless Alloy wheels
Sava MC 31 racing soft tires for the dry races
Dunlop TT72 for wet races
Floating front discbrake can't remember what make

Other Stuff:
Renthal Kevlar grips
Zap Clutch lever
Sticker kit by JJW designs (love it)

jcurbs311 · 11-01-2009, 04:13 PM

more to come

minirider54 · 11-01-2009, 04:22 PM

Momo · 11-01-2009, 05:41 PM

Hereby my Honda Ape 200cc.
Took me some time to finish, but it is finally done. Somewhere on the site there is a thread when I was building it.

It started as a standard 50cc Ape. I bought a 200cc liquid cooled engine, being told it would fit straight in. NOT! So the details are:

200cc Lifan liquid cooled engine
modified frame: bent the front tube to fit the engine in, removed old engine brackets and welded on new ones; redrilled the swingarm pivot hole to align it with the front sprocket. Added two supports that lock into the old holes for support
Honda Sonic 125cc radiator, at the rear because no room in front (and looks cool). Added a fan, it's always on for extra cooling.
KSR front end, made a aluminum axle for the triple tree, because the Ape bearings are a size smaller than the KSR's
Wavey disc brakes, in front a bigger size than standard (calipers standard KSR), these really work (standard drums are nothing special)
Locally made exhaust, that goes from small to big ID
Modified KSR swingarm: +4", by aluminum extensions, removed top brace and added bottom brace, had to take off 2mm on each side of the bushings to make it fit the frame
Kitaco big $ seat, must have on a budget build like this! (Came with the standard bike)
chromed KSR wheels with 120 tires
Home made alu spacers and other small stuff to make everything fit
16/28 sprockets. Ordered a 18-teeth sprocket, but the spline is too small for the shaft. I need some extra teeth for increased speed, the engine is more than strong enough to handle it. Any suggestions where to get 17 or 18 teeth sprocket?
standard paint for that low-profile look, had to cut some plastic to make the carb and radiator hoses fit

All that on a budget of about $3300

50WHIP · 11-01-2009, 06:09 PM

Here we go

Chassis
V-3
ZOKES
BBR REAR DISC KIT
HAYES FRONT BRAKES
BRIDGESTONE 402&403 TIRES

MOTOR
150+R
PORTED HEAD AND INTAKE
PWK28 CARB
LIGHTENED FLYWHEEL
AMR REV BOX
4SPD WITH QUIK SHIFT
TAKEGAWA 6DISC CLUTCH

CONTROLS & ACC.
WORKS CONNECTION PRO PERCH CLUTCH
JOKER BILLET THROTTLE
CRF150R BEND RENTHALS
RENTHAL GRIPS
SDG SEAT
MAGIK S.C GRAPHICS

The picture quality isn't that good but I guess that's why I'm not a photographer.
[IMG]

[/IMG]
[IMG]

[IMG]
[IMG]

[/IMG]

cma033 · 11-01-2009, 06:28 PM

HERES MINE

klx1695 · 11-01-2009, 06:28 PM

2007 klx110
-tb 165
-v2 head
-vm26mm carb
-full bigminis stage 3 rear end
-dual pro circuits
-takegawa clutch cover and clutch
- many more

klx1695 · 11-01-2009, 07:01 PM

hollywood213 · 11-01-2009, 07:07 PM

heres my KLXR before pics : ( one with graphics one after graphics.. now has black rims, different swinger and black marzocchi forks! wish i coulda got the updated pics in!! but ill give her a try anyways

briansX19haulsass · 11-01-2009, 07:48 PM

I no you guys arent used to seeing these but they are the same motors that are in yours

This is my 100% custom X19 super pocket bike
Lots and Lots of mods
It has a 160cc KRP motor in it with all the extra goodies.
Hope you guys like it.

steve711 · 11-01-2009, 10:36 PM

This is my 12'' Klx who was ridden by Dany Riverin,he won the Marshfield ''Rockstar class ''2009 and finished 2nd at the Master of minis Championship 2008.He won also the 2009 Montreal SX Pitbike class.

BIKE DESCRIPTION :

4th gear shift drum
modified crankshaft(stock stroke)
HD output shaft
Takegawa cable clutch
178cc scut bore with d-comp camshaft
V-2 head porting by NDBSPORTS
Takegawa+r manifold
28 d-slide Carb
K&N air filter
Bump start
FMF Ti exhaust

FRONT SUSPENSION:
KX 65 forks revalve by FEAL suspension
TRI-STAR triple clamp
KX 65 front wheel /hub powdered coat black
KX 65 OEM front brake with ARC lever

REAR SUSPENSION:
REEG MX rear suspension kit,special shock tower
ELKA shock
REEG MX black hub,black rim,HD spokes
REEG MX complete brake kit
40th rear sprocket

MISC:
GUTS racing tall seat,white seat cover
RENTHAL bars & grips
ASV lever with F3 pro perch with quick adjust
White UFO plastics
LGM graphics
KX 60 kickstart
SANO skid plate
REEG MX footpeg mount with Fastway Pegs
IMS shifter
Chain roller
DID gold chain
SILVER powdered coat frame

benthepro · 11-02-2009, 04:54 AM

some sik bikes there im hoping to get my BBR build done in time for next month

briansX19haulsass · 11-02-2009, 05:12 AM

well thats good, now I am not the only street bike.....

bigbike · 11-02-2009, 07:08 AM

Quote:

Originally Posted by jcurbs311

more to come

This is a super clean bike like how the seat and the frame looks

jcurbs311 · 11-02-2009, 09:52 AM

Quote:

Originally Posted by bigbike

This is a super clean bike like how the seat and the frame looks

thanks guy

SHADE · 11-02-2009, 12:23 PM

Some sick bikes, 711 or 311 hmmm

jcurbs311 · 11-02-2009, 12:25 PM

Quote:

Originally Posted by SHADE

Some sick bikes, 711 or 311 hmmm

thanks bud

yotaman450 · 11-02-2009, 12:33 PM

Quote:

Originally Posted by steve711

Here's mine of the TEAM GAGNON/NDBSPORTS race bike.

bike is sick! seen it in person, my question is when is it coming back to the MoM series???

nelson28 · 11-02-2009, 07:10 PM

hollywoods bike is def. the sickest ride around. hes got my vote for sure!

11-01-2009, 10:23 AM	#1 (permalink)
jigracing Super Moderator Join Date: Jan 2004 Location: Hesperia, Ca Posts: 3,265 My Mood:	Midsize of the Month November 2009 First ten bikes posted get in. (12" rear wheel only) (this is the last MOTM for 09, December will be Midsize of the Year voting) __________________ Scott

11-01-2009, 10:58 AM	#2 (permalink)
KLJ#24 PM Newbie Join Date: Jun 2008 Location: Denmark Posts: 30 My Mood:	Re: Midsize of the Month November 2009 MOFF SFR 150 SM Engine setup: New model Yx150 TB V2 racehead with a Takegawa S35 cam TB Rear facing inlet manifold Mikuni VM26 carb Doma 94db exhaust system. Chassis: Marzoochi shiver replica Forks Fastace Rearshock Mobster Tubeless Alloy wheels Sava MC 31 racing soft tires for the dry races Dunlop TT72 for wet races Floating front discbrake can't remember what make Other Stuff: Renthal Kevlar grips Zap Clutch lever Sticker kit by JJW designs (love it)

11-01-2009, 04:13 PM	#3 (permalink)
jcurbs311 1st Gear Member Join Date: Nov 2008 Location: charlton mass Posts: 221 My Mood:	Re: Midsize of the Month November 2009 more to come Last edited by jcurbs311; 11-01-2009 at 04:19 PM.

11-01-2009, 04:22 PM	#4 (permalink)
minirider54 3rd Gear Member Join Date: Aug 2007 Location: CT Posts: 2,084	Re: Midsize of the Month November 2009

11-01-2009, 05:41 PM	#5 (permalink)
Momo 1st Gear Member Join Date: Apr 2008 Location: Thailand Posts: 119 My Mood:	Re: Midsize of the Month November 2009 Hereby my Honda Ape 200cc. Took me some time to finish, but it is finally done. Somewhere on the site there is a thread when I was building it. It started as a standard 50cc Ape. I bought a 200cc liquid cooled engine, being told it would fit straight in. NOT! So the details are: 200cc Lifan liquid cooled engine modified frame: bent the front tube to fit the engine in, removed old engine brackets and welded on new ones; redrilled the swingarm pivot hole to align it with the front sprocket. Added two supports that lock into the old holes for support Honda Sonic 125cc radiator, at the rear because no room in front (and looks cool). Added a fan, it's always on for extra cooling. KSR front end, made a aluminum axle for the triple tree, because the Ape bearings are a size smaller than the KSR's Wavey disc brakes, in front a bigger size than standard (calipers standard KSR), these really work (standard drums are nothing special) Locally made exhaust, that goes from small to big ID Modified KSR swingarm: +4", by aluminum extensions, removed top brace and added bottom brace, had to take off 2mm on each side of the bushings to make it fit the frame Kitaco big $ seat, must have on a budget build like this! (Came with the standard bike) chromed KSR wheels with 120 tires Home made alu spacers and other small stuff to make everything fit 16/28 sprockets. Ordered a 18-teeth sprocket, but the spline is too small for the shaft. I need some extra teeth for increased speed, the engine is more than strong enough to handle it. Any suggestions where to get 17 or 18 teeth sprocket? standard paint for that low-profile look, had to cut some plastic to make the carb and radiator hoses fit All that on a budget of about $3300 Attached Thumbnails Last edited by Momo; 11-02-2009 at 07:02 AM. Reason: Update pics

View Poll Results: Vote for Midsize of the Month November 2009
KLJ#24	18	6.74%
jcurbs311	78	29.21%
minirider54	7	2.62%
Momo	15	5.62%
50WHIP	40	14.98%
cma033	15	5.62%
klx1695	10	3.75%
hollywood213	8	3.00%
briansX19haulsass	5	1.87%
steve711	71	26.59%
Voters: 267. You may not vote on this poll

11-01-2009, 06:09 PM	#6 (permalink)
50WHIP 3rd Gear Member Join Date: Apr 2005 Location: INDIANA PA. Posts: 1,991	Re: Midsize of the Month November 2009 Here we go Chassis V-3 ZOKES BBR REAR DISC KIT HAYES FRONT BRAKES BRIDGESTONE 402&403 TIRES MOTOR 150+R PORTED HEAD AND INTAKE PWK28 CARB LIGHTENED FLYWHEEL AMR REV BOX 4SPD WITH QUIK SHIFT TAKEGAWA 6DISC CLUTCH CONTROLS & ACC. WORKS CONNECTION PRO PERCH CLUTCH JOKER BILLET THROTTLE CRF150R BEND RENTHALS RENTHAL GRIPS SDG SEAT MAGIK S.C GRAPHICS The picture quality isn't that good but I guess that's why I'm not a photographer. [IMG][/IMG] [IMG][/IMG] [IMG][IMG] [IMG][/IMG] Attached Thumbnails Last edited by 50WHIP; 11-02-2009 at 06:07 PM.

11-01-2009, 06:28 PM	#7 (permalink)
cma033 2nd Gear Member Join Date: Sep 2008 Posts: 306	Re: Midsize of the Month November 2009 HERES MINE

11-01-2009, 06:28 PM	#8 (permalink)
klx1695 1st Gear Member Join Date: Jul 2008 Location: jefferson iowa Posts: 107	Re: Midsize of the Month November 2009 2007 klx110 -tb 165 -v2 head -vm26mm carb -full bigminis stage 3 rear end -dual pro circuits -takegawa clutch cover and clutch - many more Attached Thumbnails

11-01-2009, 07:01 PM	#9 (permalink)
klx1695 1st Gear Member Join Date: Jul 2008 Location: jefferson iowa Posts: 107	Re: Midsize of the Month November 2009

11-01-2009, 07:07 PM	#10 (permalink)
hollywood213 2nd Gear Member Join Date: Feb 2008 Location: Pittsburgh, PA Posts: 971 My Mood:	Re: Midsize of the Month November 2009 heres my KLXR before pics : ( one with graphics one after graphics.. now has black rims, different swinger and black marzocchi forks! wish i coulda got the updated pics in!! but ill give her a try anyways

11-01-2009, 07:48 PM	#11 (permalink)
briansX19haulsass PM Newbie Join Date: Feb 2009 Location: St.Charles Posts: 93	Re: Midsize of the Month November 2009 I no you guys arent used to seeing these but they are the same motors that are in yours This is my 100% custom X19 super pocket bike Lots and Lots of mods It has a 160cc KRP motor in it with all the extra goodies. Hope you guys like it. Attached Thumbnails

11-01-2009, 10:36 PM	#12 (permalink)
steve711 2nd Gear Member Join Date: Sep 2005 Location: qc,canada Posts: 354	Re: Midsize of the Month November 2009 This is my 12'' Klx who was ridden by Dany Riverin,he won the Marshfield ''Rockstar class ''2009 and finished 2nd at the Master of minis Championship 2008.He won also the 2009 Montreal SX Pitbike class. BIKE DESCRIPTION : 4th gear shift drum modified crankshaft(stock stroke) HD output shaft Takegawa cable clutch 178cc scut bore with d-comp camshaft V-2 head porting by NDBSPORTS Takegawa+r manifold 28 d-slide Carb K&N air filter Bump start FMF Ti exhaust FRONT SUSPENSION: KX 65 forks revalve by FEAL suspension TRI-STAR triple clamp KX 65 front wheel /hub powdered coat black KX 65 OEM front brake with ARC lever REAR SUSPENSION: REEG MX rear suspension kit,special shock tower ELKA shock REEG MX black hub,black rim,HD spokes REEG MX complete brake kit 40th rear sprocket MISC: GUTS racing tall seat,white seat cover RENTHAL bars & grips ASV lever with F3 pro perch with quick adjust White UFO plastics LGM graphics KX 60 kickstart SANO skid plate REEG MX footpeg mount with Fastway Pegs IMS shifter Chain roller DID gold chain SILVER powdered coat frame Last edited by steve711; 11-08-2009 at 11:19 PM.

11-02-2009, 04:54 AM	#13 (permalink)
benthepro 2nd Gear Member Join Date: Nov 2007 Location: over the warter in the good old uk Posts: 310 My Mood:	Re: Midsize of the Month November 2009 some sik bikes there im hoping to get my BBR build done in time for next month

11-02-2009, 05:12 AM	#14 (permalink)
briansX19haulsass PM Newbie Join Date: Feb 2009 Location: St.Charles Posts: 93	Re: Midsize of the Month November 2009 well thats good, now I am not the only street bike.....

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

11-02-2009, 12:23 PM	#17 (permalink)
SHADE 3rd Gear Member Join Date: Jan 2005 Location: So*Cal Posts: 6,187 My Mood:	Re: Midsize of the Month November 2009 Some sick bikes, 711 or 311 hmmm

11-02-2009, 07:10 PM	#20 (permalink)
nelson28 2nd Gear Member Join Date: Dec 2008 Location: mount pleasant pa Posts: 641 My Mood:	Re: Midsize of the Month November 2009 hollywoods bike is def. the sickest ride around. hes got my vote for sure!