Planet Minis

wytecraka · 11-26-2009, 03:45 PM

will the sdg or whatever style hub work on a crf70? im interested in a set of wheels from ooracing but the mega wides are only available in 32 hole so have to use a diff hub.

doopsx3 · 11-26-2009, 03:50 PM

sdg ssr are disc brake usually

wytecraka · 11-26-2009, 04:06 PM

but the axle and sprockets will line up and b square? could i use a disk brake kit just for the caliper brackets or would i have to make my own and weld tabs to the forks?
thanks

doopsx3 · 11-26-2009, 04:09 PM

you would probably have to use different bearings or adapters....China wheels are normally 15mm and the Honda is smaller...12mm axle I think....why do you want to use China wheels....WRP or Warp9 might make the wheel you need

wytecraka · 11-26-2009, 04:31 PM

its plated and i want to run a 110 or 120 scooter tire so i'd need a 2.5 or 3.0 if the 2.15 wont work. i think the 2.15 will work, but just checking my options. i'd really like to do the 2.5 front and the 3.5 rear just for the looks of it but not sure if it would clear the swing arm.

doopsx3 · 11-26-2009, 04:34 PM

I have a 2.15 fr and 2.5 rear on my ST90 'Tard project bike and the 2.5 would never fit on the front....it is close quarters with the 2.15

wytecraka · 11-26-2009, 04:50 PM

hmmm. well that sucks, what about the rear, do you think anything more than a 2.5 would clear the stock swing arm with a 120 or 130 rear?

doopsx3 · 11-26-2009, 05:06 PM

IDK do not have a 70 and I used a big bike style swingarm with my ST90
rear

front

wytecraka · 11-26-2009, 05:09 PM

what size tires u runnin?

doopsx3 · 11-26-2009, 05:18 PM

120/80-12 R Dunlop TT92
100/90-12 Fr

wytecraka · 11-26-2009, 05:23 PM

aight, well i have hope that the 110s will work fine with the 2.15s and that will save me a lot of hassle with fitting disks.
appreciate your help.

doopsx3 · 11-26-2009, 05:27 PM

well ya could just change out the whole front end and upgrade to disc brakes...the least expensive set-up would be the GPX China forks ...been told after ya change the fluid they are okay...not Zokes but okay

11-26-2009, 03:45 PM	#1 (permalink)
wytecraka PM Newbie Join Date: Mar 2007 Location: baton rouge Posts: 40	sdg, ssr, wheels will the sdg or whatever style hub work on a crf70? im interested in a set of wheels from ooracing but the mega wides are only available in 32 hole so have to use a diff hub.

11-26-2009, 03:50 PM	#2 (permalink)
doopsx3 3rd Gear Member Join Date: Aug 2008 Location: San Diego Posts: 4,730 My Mood:	Re: sdg, ssr, wheels sdg ssr are disc brake usually

11-26-2009, 04:06 PM	#3 (permalink)
wytecraka PM Newbie Join Date: Mar 2007 Location: baton rouge Posts: 40	Re: sdg, ssr, wheels but the axle and sprockets will line up and b square? could i use a disk brake kit just for the caliper brackets or would i have to make my own and weld tabs to the forks? thanks

11-26-2009, 04:09 PM	#4 (permalink)
doopsx3 3rd Gear Member Join Date: Aug 2008 Location: San Diego Posts: 4,730 My Mood:	Re: sdg, ssr, wheels you would probably have to use different bearings or adapters....China wheels are normally 15mm and the Honda is smaller...12mm axle I think....why do you want to use China wheels....WRP or Warp9 might make the wheel you need

11-26-2009, 04:31 PM	#5 (permalink)
wytecraka PM Newbie Join Date: Mar 2007 Location: baton rouge Posts: 40	Re: sdg, ssr, wheels its plated and i want to run a 110 or 120 scooter tire so i'd need a 2.5 or 3.0 if the 2.15 wont work. i think the 2.15 will work, but just checking my options. i'd really like to do the 2.5 front and the 3.5 rear just for the looks of it but not sure if it would clear the swing arm.

11-26-2009, 04:34 PM	#6 (permalink)
doopsx3 3rd Gear Member Join Date: Aug 2008 Location: San Diego Posts: 4,730 My Mood:	Re: sdg, ssr, wheels I have a 2.15 fr and 2.5 rear on my ST90 'Tard project bike and the 2.5 would never fit on the front....it is close quarters with the 2.15

11-26-2009, 04:50 PM	#7 (permalink)
wytecraka PM Newbie Join Date: Mar 2007 Location: baton rouge Posts: 40	Re: sdg, ssr, wheels hmmm. well that sucks, what about the rear, do you think anything more than a 2.5 would clear the stock swing arm with a 120 or 130 rear?

11-26-2009, 05:06 PM	#8 (permalink)
doopsx3 3rd Gear Member Join Date: Aug 2008 Location: San Diego Posts: 4,730 My Mood:	Re: sdg, ssr, wheels IDK do not have a 70 and I used a big bike style swingarm with my ST90 rear front

11-26-2009, 05:09 PM	#9 (permalink)
wytecraka PM Newbie Join Date: Mar 2007 Location: baton rouge Posts: 40	Re: sdg, ssr, wheels what size tires u runnin?

11-26-2009, 05:18 PM	#10 (permalink)
doopsx3 3rd Gear Member Join Date: Aug 2008 Location: San Diego Posts: 4,730 My Mood:	Re: sdg, ssr, wheels 120/80-12 R Dunlop TT92 100/90-12 Fr

11-26-2009, 05:23 PM	#11 (permalink)
wytecraka PM Newbie Join Date: Mar 2007 Location: baton rouge Posts: 40	Re: sdg, ssr, wheels aight, well i have hope that the 110s will work fine with the 2.15s and that will save me a lot of hassle with fitting disks. appreciate your help.

11-26-2009, 05:27 PM	#12 (permalink)
doopsx3 3rd Gear Member Join Date: Aug 2008 Location: San Diego Posts: 4,730 My Mood:	Re: sdg, ssr, wheels well ya could just change out the whole front end and upgrade to disc brakes...the least expensive set-up would be the GPX China forks ...been told after ya change the fluid they are okay...not Zokes but okay

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)