Planet Minis

Sincityshooter13 · 06-08-2009, 10:32 AM

im curently running a 2" swinger, i shock, and bbr sp5 forks.

i wanna use the 50stunt hand brake, but the bottom part of my swinger is square tubing.. if i put the hand brake on the upper part of the swinger and move the brake arm back a few splines, would it work ok?

or am i better off selling the swinger and forks, and put on the stock swing with i shock and stock forks with 1" fork legs

50-STUNT · 06-08-2009, 10:48 AM

i think you could attach it to the top bar...but i dont know how good its gunna work like that!

fiddys4life · 06-08-2009, 11:10 AM

you could just sell the rear swinger and replace it with a stocker. No need to sell off the sp-5's.

96Justin · 06-08-2009, 11:55 AM

or just keep your setup and fabricate up a new bracket that attaches to your square swinger...ill check my comp might still have pics of the one I made for the superpro swinger to allow the 50 stunt hand brake

Sincityshooter13 · 06-08-2009, 12:11 PM

Quote:

Originally Posted by 96Justin

or just keep your setup and fabricate up a new bracket that attaches to your square swinger...ill check my comp might still have pics of the one I made for the superpro swinger to allow the 50 stunt hand brake

if you could please

Sincityshooter13 · 06-08-2009, 12:13 PM

Quote:

Originally Posted by fiddys4life

you could just sell the rear swinger and replace it with a stocker. No need to sell off the sp-5's.

i have the stock swing laying around, i just think it will be looking like a prerunner or a chopper cus the rear would be lower

50-STUNT · 06-08-2009, 12:22 PM

it shouldnt be lower..it should just be shorter! u have a +2 inch swinger rite?...its 2 inches longer...i think there the same height..i may be wrong though!

Sincityshooter13 · 06-09-2009, 01:09 AM

itll be a little lower because of the angle the swinger is with the i shock

tt-r420 · 06-09-2009, 01:11 AM

what about using a 70 swinger?

d.t.f . · 06-12-2009, 05:39 AM

why not just drop the forks a little bit at the triples to level it off?

06-08-2009, 10:32 AM	#1 (permalink)
Sincityshooter13 1st Gear Member Join Date: May 2009 Location: Las Vegas Posts: 105	stock swinger forks? im curently running a 2" swinger, i shock, and bbr sp5 forks. i wanna use the 50stunt hand brake, but the bottom part of my swinger is square tubing.. if i put the hand brake on the upper part of the swinger and move the brake arm back a few splines, would it work ok? or am i better off selling the swinger and forks, and put on the stock swing with i shock and stock forks with 1" fork legs Attached Thumbnails

06-08-2009, 10:48 AM	#2 (permalink)
50-STUNT 2nd Gear Member Join Date: May 2009 Location: M.A. Posts: 721	Re: stock swinger forks? i think you could attach it to the top bar...but i dont know how good its gunna work like that!

06-08-2009, 11:10 AM	#3 (permalink)
fiddys4life 2nd Gear Member Join Date: Jun 2008 Location: Durango, CO Posts: 337	Re: stock swinger forks? you could just sell the rear swinger and replace it with a stocker. No need to sell off the sp-5's.

06-08-2009, 11:55 AM	#4 (permalink)
96Justin 2nd Gear Member Join Date: Jan 2009 Location: Calgary, AB, Canada Posts: 770 My Mood:	Re: stock swinger forks? or just keep your setup and fabricate up a new bracket that attaches to your square swinger...ill check my comp might still have pics of the one I made for the superpro swinger to allow the 50 stunt hand brake

06-08-2009, 12:22 PM	#7 (permalink)
50-STUNT 2nd Gear Member Join Date: May 2009 Location: M.A. Posts: 721	Re: stock swinger forks? it shouldnt be lower..it should just be shorter! u have a +2 inch swinger rite?...its 2 inches longer...i think there the same height..i may be wrong though!

06-09-2009, 01:09 AM	#8 (permalink)
Sincityshooter13 1st Gear Member Join Date: May 2009 Location: Las Vegas Posts: 105	Re: stock swinger forks? itll be a little lower because of the angle the swinger is with the i shock

06-09-2009, 01:11 AM	#9 (permalink)
tt-r420 2nd Gear Member Join Date: Aug 2007 Location: Santa Barbara, CA Posts: 576	Re: stock swinger forks? what about using a 70 swinger?

06-12-2009, 05:39 AM	#10 (permalink)
d.t.f . PM Newbie Join Date: May 2009 Location: dub b, massachusetts Posts: 60	Re: stock swinger forks? why not just drop the forks a little bit at the triples to level it off?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)