Planet Minis

fatcaaat · 01-25-2008, 08:23 AM

Used and cheap and I have various motor parts I can trade if intestested.

Complete CT70 Head...needs valve job
Lifan 120 crank
xTreme 55.5 or 57mm crank (don't know the size)
Takegawa super head oil takeoff new
New 22mm carb (says mikuni)
China flywheel new
GPX Head, valves new never run
GPX cylinder and piston never run
New 57mm piston w 13mm pin
Used xTreme Head (think it has 24/21 valves)
Set of unused Lifan 120 cases with Oil Pump and studs (no clutch side)
Stock 6v piston and Cylinder at 75cc fresh bore and +.25 piston...maybe an hour on it.

firepower354 · 01-25-2008, 02:27 PM

Can you press one apart to install a shorter rod? If so, I have a cheap option for you...

fatcaaat · 01-25-2008, 02:32 PM

I don't have any shorter rods to run on it. I could be convinced to run the china crank, but I need stock cylinder height and stock xr50 deck.

firepower354 · 01-25-2008, 02:39 PM

Got'cha. I used a beefy 91mm rod on one of the 50mm strokers I have and on that Tak I rebuilt. Took 2 base gaskets to put it at zero deck, no sweat. I have another new rod and crank to make a short decker out of, but I just haven't got time to do the press apart and assembly.

p3racer · 01-25-2008, 07:52 PM

I got a Takegawa 50mm crank for sale asking 150.00 shipped for it

01-25-2008, 08:23 AM	#1 (permalink)
fatcaaat 3rd Gear Member Join Date: Sep 2004 Location: Arlington, VA Posts: 3,985	WTB: Trail bikes 51mm crankshaft Used and cheap and I have various motor parts I can trade if intestested. Complete CT70 Head...needs valve job Lifan 120 crank xTreme 55.5 or 57mm crank (don't know the size) Takegawa super head oil takeoff new New 22mm carb (says mikuni) China flywheel new GPX Head, valves new never run GPX cylinder and piston never run New 57mm piston w 13mm pin Used xTreme Head (think it has 24/21 valves) Set of unused Lifan 120 cases with Oil Pump and studs (no clutch side) Stock 6v piston and Cylinder at 75cc fresh bore and +.25 piston...maybe an hour on it.

01-25-2008, 02:27 PM	#2 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 12,324 My Mood:	Re: WTB: Trail bikes 51mm crankshaft Can you press one apart to install a shorter rod? If so, I have a cheap option for you... __________________ If it has my name on it I did it;) FirepowerMinis.com 810-237-9537 M-F 9-6 Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Piranha/Medina/Thumpstar bikes, parts, engines and accessories.

01-25-2008, 02:32 PM	#3 (permalink)
fatcaaat 3rd Gear Member Join Date: Sep 2004 Location: Arlington, VA Posts: 3,985	Re: WTB: Trail bikes 51mm crankshaft I don't have any shorter rods to run on it. I could be convinced to run the china crank, but I need stock cylinder height and stock xr50 deck.

01-25-2008, 02:39 PM	#4 (permalink)
firepower354 Advertiser Join Date: Oct 2006 Location: Flint MI Posts: 12,324 My Mood:	Re: WTB: Trail bikes 51mm crankshaft Got'cha. I used a beefy 91mm rod on one of the 50mm strokers I have and on that Tak I rebuilt. Took 2 base gaskets to put it at zero deck, no sweat. I have another new rod and crank to make a short decker out of, but I just haven't got time to do the press apart and assembly. __________________ If it has my name on it I did it;) FirepowerMinis.com 810-237-9537 M-F 9-6 Custom FPM parts and engines. Parts and service for all makes. Honda Trail Bikes parts and accessories. Piranha/Medina/Thumpstar bikes, parts, engines and accessories.

01-25-2008, 07:52 PM	#5 (permalink)
p3racer Founding Member Join Date: Sep 2003 Location: FLORIDA Posts: 6,285	Re: WTB: Trail bikes 51mm crankshaft I got a Takegawa 50mm crank for sale asking 150.00 shipped for it

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)