Planet Minis

alexficco · 04-20-2009, 10:50 PM

Possibly up for sale is a 1974 topaz orange ct70 in pretty good condition. I've been working on it very slowly for a few years and it still needs some minor things to make it 100% complete.

Spec's:
`1974
`Topaz Orange Color.
`Brand new never run 95cc engine built by fatcaat. It has a media blasted xr70 head with a cylinder marked 49CC. Honda 3 down tranny. Trailbikes Manual clutch. Lightened Gpx? flywheel. Mikuni 24mm carb.
`Painted black stock wheels with cleaned up silver hubs and brand new michelin tires and brand new tubes.
`Fmf 4.1 Crf50 pipe. I have the stock pipe also, so for the right price ill sell it with the fmf.
`only just over 1000 original miles on the body.

The needs:
`Fork Oil and steering head bearings
`On the rear brake, the little gear that the brake arm attaches to snapped, so it needs on of those.
`Possibly some wiring/ bulbs? Its a 12v motor with a 6v bike so you need something to make it work. When i rode it with the stock 70cc motor, all the lights and horn worked.
`Turn signals? If your state requires that.
I think thats it

If you add up all this stuff on ebay/ dr atv its really not that much money for all of this.

The Bads:
`two tiny rips in the seat cover
`a couple of paint chips here and there.
`Grips are useable but one is kinda messed up on the end.

So like i said, it's in pretty good shape considering its over 30 years old. I do have the title for it and it was registered in california a few years back. It had cali plates on it when i got it. I saw a stocker on here for i think $1200 a while back in similar condition SO MAKE AND OFFER ON ROLLER MOTOR OR COMPLETE

Here are some bad pics off my phone, and the bike is not all together!

alexficco · 04-29-2009, 07:36 PM

bump

LTrain74 · 05-01-2009, 02:11 AM

This may be a dumb question but will ct70 wheels fit my k1 z50?

alexficco · 05-05-2009, 12:07 AM

bump.

alexficco · 05-12-2009, 02:51 PM

trade motors? i think i might go with a 160...

alexficco · 05-25-2009, 10:59 PM

bump need this gone. just bought a zuma! had two flake buyers on ebay!

alexficco · 06-01-2009, 12:36 AM

make an offer its just sitting here. have too many bikes

alexficco · 06-03-2009, 08:49 PM

bump

alexficco · 07-22-2009, 12:14 PM

bump. motor/ roller part?

CrawlerD · 07-22-2009, 04:24 PM

pms (2) sent

alexficco · 07-26-2009, 09:18 PM

bump

alexficco · 07-31-2009, 05:20 PM

bump

jpct70 · 07-31-2009, 09:32 PM

pm sent

alexficco · 09-08-2009, 09:54 PM

bump. any offers for complete or roller or motor? tired of looking at this thing while the zuma gets ridden haha

hydroman-420 · 09-09-2009, 05:26 AM

will you part OUT?

ishi · 09-09-2009, 11:48 AM

I would be interested in the rack and pipe if you end up parting it out.

c

alexficco · 09-12-2009, 02:50 AM

rather not part because i dont know what most of the parts are worth. make some offers tho for complete, 4.1, or roller/motor

alexficco · 09-13-2009, 09:26 PM

Bump

alexficco · 09-15-2009, 11:17 PM

bump

alexficco · 09-25-2009, 01:27 PM

bump. make me an offer its just sitting here!

04-20-2009, 10:50 PM	#1 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	74 ct70 Possibly up for sale is a 1974 topaz orange ct70 in pretty good condition. I've been working on it very slowly for a few years and it still needs some minor things to make it 100% complete. Spec's: `1974 `Topaz Orange Color. `Brand new never run 95cc engine built by fatcaat. It has a media blasted xr70 head with a cylinder marked 49CC. Honda 3 down tranny. Trailbikes Manual clutch. Lightened Gpx? flywheel. Mikuni 24mm carb. `Painted black stock wheels with cleaned up silver hubs and brand new michelin tires and brand new tubes. `Fmf 4.1 Crf50 pipe. I have the stock pipe also, so for the right price ill sell it with the fmf. `only just over 1000 original miles on the body. The needs: `Fork Oil and steering head bearings `On the rear brake, the little gear that the brake arm attaches to snapped, so it needs on of those. `Possibly some wiring/ bulbs? Its a 12v motor with a 6v bike so you need something to make it work. When i rode it with the stock 70cc motor, all the lights and horn worked. `Turn signals? If your state requires that. I think thats it If you add up all this stuff on ebay/ dr atv its really not that much money for all of this. The Bads: `two tiny rips in the seat cover `a couple of paint chips here and there. `Grips are useable but one is kinda messed up on the end. So like i said, it's in pretty good shape considering its over 30 years old. I do have the title for it and it was registered in california a few years back. It had cali plates on it when i got it. I saw a stocker on here for i think $1200 a while back in similar condition SO MAKE AND OFFER ON ROLLER MOTOR OR COMPLETE Here are some bad pics off my phone, and the bike is not all together! Last edited by alexficco; 09-13-2009 at 09:27 PM.

04-29-2009, 07:36 PM	#2 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump

05-01-2009, 02:11 AM	#3 (permalink)
LTrain74 PM Newbie Join Date: Apr 2009 Location: Auburn, wa Posts: 3	Re: 74 ct70 This may be a dumb question but will ct70 wheels fit my k1 z50?

05-05-2009, 12:07 AM	#4 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump.

05-12-2009, 02:51 PM	#5 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 trade motors? i think i might go with a 160...

05-25-2009, 10:59 PM	#6 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump need this gone. just bought a zuma! had two flake buyers on ebay!

06-01-2009, 12:36 AM	#7 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 make an offer its just sitting here. have too many bikes

06-03-2009, 08:49 PM	#8 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump

07-22-2009, 12:14 PM	#9 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump. motor/ roller part?

07-22-2009, 04:24 PM	#10 (permalink)
CrawlerD 1st Gear Member Join Date: May 2008 Location: Sin City Posts: 645	Re: 74 ct70 pms (2) sent

07-26-2009, 09:18 PM	#11 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump

07-31-2009, 05:20 PM	#12 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump

07-31-2009, 09:32 PM	#13 (permalink)
jpct70 PM Newbie Join Date: Jul 2009 Posts: 3	Re: 74 ct70 pm sent

09-08-2009, 09:54 PM	#14 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump. any offers for complete or roller or motor? tired of looking at this thing while the zuma gets ridden haha

09-09-2009, 05:26 AM	#15 (permalink)
hydroman-420 2nd Gear Member Join Date: Dec 2008 Location: stamford,ct Posts: 413 My Mood:	Re: 74 ct70 will you part OUT?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

09-09-2009, 11:48 AM	#16 (permalink)
ishi PM Newbie Join Date: Jul 2009 Posts: 19	Re: 74 ct70 I would be interested in the rack and pipe if you end up parting it out. c

09-12-2009, 02:50 AM	#17 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 rather not part because i dont know what most of the parts are worth. make some offers tho for complete, 4.1, or roller/motor

09-13-2009, 09:26 PM	#18 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 Bump

09-15-2009, 11:17 PM	#19 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump

09-25-2009, 01:27 PM	#20 (permalink)
alexficco 3rd Gear Member Join Date: Dec 2006 Location: Gardnerville, NV Posts: 1,277	Re: 74 ct70 bump. make me an offer its just sitting here!