Planet Minis

EddieNewYork · 09-22-2009, 07:35 PM

Selling a brand new set of G'craft 55mm offset triples for the ZB.

$450 shipped in the CONUS.

Thanks for looking.

Eddie

--X-- · 09-23-2009, 02:36 PM

Do you know if this will work with NSR rims and the 30mm NSR forks? I have the fork legs and rims already, so I need to find a triple, brake mount and front brake set up.

big pete · 09-23-2009, 03:41 PM

This triple is made for that setup. It'll give you enough clearance if you run a big bore motor. Here's a pic of my old ZB with the same triple clamp

EddieNewYork · 09-23-2009, 04:03 PM

Quote:

Originally Posted by Dutch

Do you know if this will work with NSR rims and the 30mm NSR forks? I have the fork legs and rims already, so I need to find a triple, brake mount and front brake set up.

Yes, they are designed for 30mm NSR fork legs as Pete mentioned.

supernes550 · 09-23-2009, 04:55 PM

Quote:

Originally Posted by Dutch

Do you know if this will work with NSR rims and the 30mm NSR forks? I have the fork legs and rims already, so I need to find a triple, brake mount and front brake set up.

Those triples are off the bike Pete posted up. Christian, if you want a nice brake set up to go along with Eddie's triples check this out. http://www.planetminis.com/f58/bremb...et-132745.html

big pete · 09-23-2009, 10:53 PM

Btw, the bike was never saw the street. It was put together and then parted out.

EddieNewYork · 09-24-2009, 02:00 AM

Pete, were those the short NSR forks (same size as synapse) you have in that pic? Did you ever buy those fork risers?

--X-- · 09-24-2009, 05:37 AM

Pete, my forks and rims look exactly like the ones on your ZB. I've even polished my fork legs like those too.
Eddie, sounds like those are exactly what I'm looking for, but I have to sell a couple things around here before I'll have the extra cash. Now that wakeboarding season is over and I'm closing up our lake lot this weekend I should have some extra cash to put towards my super slow going street Z build. It honestly might take me a week or two to come up with the cash, but if you still have them then, I'll probably take them.

Nesto, I saw you post that earlier, and would LOVE to pick that set-up up, but I'm currently scraping by for these triples, so the brake isn't in the cards yet.

I bought another '91 CT earlier this week, and I need to figure out what I'm going to do with that too.

Thanks, guys for the info so far. Oh, do any of you know of a spacer/speedo piece (not sure what they are called) that can be used with NSR rims that would work with a CT speedo? My plan was possibly to strip off the lights off the CT I bought and use them on my street Z. Just not sure how I'll do the rims or speedo.

big pete · 09-24-2009, 12:02 PM

Quote:

Originally Posted by EddieNewYork

Pete, were those the short NSR forks (same size as synapse) you have in that pic? Did you ever buy those fork risers?

They were the shorter forks. I didn't see the need to run the spacers since I felt the triples gave enough clearance.

RySem · 09-24-2009, 08:09 PM

Quote:

Originally Posted by big pete

They were the shorter forks. I didn't see the need to run the spacers since I felt the triples gave enough clearance.

Good to know now...I was under the impression that the forks were 2004 when I bought them. Am I heading for disaster with these forks and stock triples?

09-22-2009, 07:35 PM	#1 (permalink)
EddieNewYork Buck Fifteen Join Date: Oct 2007 Location: Los Angeles, CA Posts: 1,913 My Mood:	FS: ZB50 G'craft Triple Clamps Selling a brand new set of G'craft 55mm offset triples for the ZB. $450 shipped in the CONUS. Thanks for looking. Eddie Attached Thumbnails

09-23-2009, 02:36 PM	#2 (permalink)
--X-- 2nd Gear Member Join Date: Mar 2006 Location: New Lenox, IL Posts: 567 My Mood:	Re: FS: ZB50 G'craft Triple Clamps Do you know if this will work with NSR rims and the 30mm NSR forks? I have the fork legs and rims already, so I need to find a triple, brake mount and front brake set up.

09-23-2009, 03:41 PM	#3 (permalink)
big pete 2nd Gear Member Join Date: Apr 2008 Location: Norcal Posts: 866	Re: FS: ZB50 G'craft Triple Clamps This triple is made for that setup. It'll give you enough clearance if you run a big bore motor. Here's a pic of my old ZB with the same triple clamp

09-23-2009, 10:53 PM	#6 (permalink)
big pete 2nd Gear Member Join Date: Apr 2008 Location: Norcal Posts: 866	Re: FS: ZB50 G'craft Triple Clamps Btw, the bike was never saw the street. It was put together and then parted out.

09-24-2009, 02:00 AM	#7 (permalink)
EddieNewYork Buck Fifteen Join Date: Oct 2007 Location: Los Angeles, CA Posts: 1,913 My Mood:	Re: FS: ZB50 G'craft Triple Clamps Pete, were those the short NSR forks (same size as synapse) you have in that pic? Did you ever buy those fork risers? Last edited by EddieNewYork; 09-24-2009 at 02:10 AM.

09-24-2009, 05:37 AM	#8 (permalink)
--X-- 2nd Gear Member Join Date: Mar 2006 Location: New Lenox, IL Posts: 567 My Mood:	Re: FS: ZB50 G'craft Triple Clamps Pete, my forks and rims look exactly like the ones on your ZB. I've even polished my fork legs like those too. Eddie, sounds like those are exactly what I'm looking for, but I have to sell a couple things around here before I'll have the extra cash. Now that wakeboarding season is over and I'm closing up our lake lot this weekend I should have some extra cash to put towards my super slow going street Z build. It honestly might take me a week or two to come up with the cash, but if you still have them then, I'll probably take them. Nesto, I saw you post that earlier, and would LOVE to pick that set-up up, but I'm currently scraping by for these triples, so the brake isn't in the cards yet. I bought another '91 CT earlier this week, and I need to figure out what I'm going to do with that too. Thanks, guys for the info so far. Oh, do any of you know of a spacer/speedo piece (not sure what they are called) that can be used with NSR rims that would work with a CT speedo? My plan was possibly to strip off the lights off the CT I bought and use them on my street Z. Just not sure how I'll do the rims or speedo.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)