Planet Minis

RySem · 10-18-2009, 10:06 AM

I have accumulated a bunch of bikes and parts lately and would like to move some along. I'll get some other pics if someone is seriously interested. Here is a list of stuff:

(2) 1971 CT70H's- Candy blue-green. 4spd manual clutch. Both are project bikes. One has the engine off of it, but together. The other has the engine off of it with the top end apart. Both have their original matching engines. One has the hard to find original rear accessory rack on it. $350 each

1971 CT70- Candy sapphire blue. 3spd semiauto. This bike is all apart and is missing a few things. Engine appears to be a good one, but has a kicker welded to the shaft. Good solid frame, great start for a resto. $200 or will part out.

1975 CT70- Mighty green. Missing signal lights and tail light, but all in all a perfect bike for a rider. It will actually clean up pretty decent. It has a nearly flawless seat pan on it too. It's supposedly a runner, but the previous owner did a little funky wiring and said the head needs a heli-coil for the sparkplug hole. I haven't looked into getting this bike running yet, but it kicks over fine and don't foresee any issues. $375

1977 CT70- Orange. Complete bike with all signals intact. Missing the tail light lense but that's about it. Kicks over with compression. Should run no problem. There's a little bit of surface rust here and there, but would clean up easily. Another bike that would be great for a rider. $375

1973 CL70- Red/Silver. Cool street cruiser project. 4spd manual clutch. Missing a couple little things like the center stand, tail light, and signal lights. Kicks over with compression, should run fine. Some pitting in the chrome here and there. The tank is clean inside, but has some dents and was painted orange. $350

1984 ATC70- Just a frame and rear axle $40 and front end (including wheel/tire) $35. I also have the footpeg assembly $20, flywheel $20, flywheel cover $25, and clutch cover $15. Let me know if you need any of this.

1974 ST90- Mighty green. Project bike. Very complete. I have extra wheels, engine, etc for it. Missing seat, airbox, and maybe a couple other odds and ends. $150 without extras, $250 with everything.

Engines: I have many engines here. Most need a rebuild. I have various CT70s, a C70 passport, a CT90, and an ATC70 engine. I will sell them as-is or I can do custom or stock rebuilds. I have a blast cabinet and a machine shop with all of the tools to do the job right. Price varies

Various other parts: just ask.

Shipping is not included in any prices. Prefer local sales for the bikes.

You can contact me by PM or email at admin @ amxmgs.com

TankTheory · 10-18-2009, 12:13 PM

Sell me that luggage rack, have a .6 gal gas tank calls for me needing to carry a small back up and I need that racckk

dfred15 · 10-18-2009, 01:30 PM

do you have titles for any of these bikes?

RySem · 10-18-2009, 06:46 PM

Quote:

Originally Posted by TankTheory

Sell me that luggage rack, have a .6 gal gas tank calls for me needing to carry a small back up and I need that racckk

I'm not too keen on getting rid of it cheap. CHP has repros for like $70.

Quote:

Originally Posted by dfred15

do you have titles for any of these bikes?

No titles...CT doesn't title anything older than 1981. Many states honor a CT bill of sale for that reason, but you'd have to check with your DMV.

Liquid Joe · 10-18-2009, 10:05 PM

do you have any seats? How much shipped to 93277?

RySem · 10-18-2009, 10:18 PM

Quote:

Originally Posted by Liquid Joe

do you have any seats? How much shipped to 93277?

None that I'm selling at this time. I'd like to keep them on the bikes for the time-being.

s_10onbagz · 10-24-2009, 12:13 AM

damn man. you have so many bikes it amazes me. Do you have any good 4 speed trannies or 72cc jugs? how is the atc bottom end and jug looking?

10-18-2009, 10:06 AM	#1 (permalink)
RySem 2nd Gear Member Join Date: May 2008 Location: Oakville, CT Posts: 377	Honda 70's and Parts Galore! I have accumulated a bunch of bikes and parts lately and would like to move some along. I'll get some other pics if someone is seriously interested. Here is a list of stuff: (2) 1971 CT70H's- Candy blue-green. 4spd manual clutch. Both are project bikes. One has the engine off of it, but together. The other has the engine off of it with the top end apart. Both have their original matching engines. One has the hard to find original rear accessory rack on it. $350 each 1971 CT70- Candy sapphire blue. 3spd semiauto. This bike is all apart and is missing a few things. Engine appears to be a good one, but has a kicker welded to the shaft. Good solid frame, great start for a resto. $200 or will part out. 1975 CT70- Mighty green. Missing signal lights and tail light, but all in all a perfect bike for a rider. It will actually clean up pretty decent. It has a nearly flawless seat pan on it too. It's supposedly a runner, but the previous owner did a little funky wiring and said the head needs a heli-coil for the sparkplug hole. I haven't looked into getting this bike running yet, but it kicks over fine and don't foresee any issues. $375 1977 CT70- Orange. Complete bike with all signals intact. Missing the tail light lense but that's about it. Kicks over with compression. Should run no problem. There's a little bit of surface rust here and there, but would clean up easily. Another bike that would be great for a rider. $375 1973 CL70- Red/Silver. Cool street cruiser project. 4spd manual clutch. Missing a couple little things like the center stand, tail light, and signal lights. Kicks over with compression, should run fine. Some pitting in the chrome here and there. The tank is clean inside, but has some dents and was painted orange. $350 1984 ATC70- Just a frame and rear axle $40 and front end (including wheel/tire) $35. I also have the footpeg assembly $20, flywheel $20, flywheel cover $25, and clutch cover $15. Let me know if you need any of this. 1974 ST90- Mighty green. Project bike. Very complete. I have extra wheels, engine, etc for it. Missing seat, airbox, and maybe a couple other odds and ends. $150 without extras, $250 with everything. Engines: I have many engines here. Most need a rebuild. I have various CT70s, a C70 passport, a CT90, and an ATC70 engine. I will sell them as-is or I can do custom or stock rebuilds. I have a blast cabinet and a machine shop with all of the tools to do the job right. Price varies Various other parts: just ask. Shipping is not included in any prices. Prefer local sales for the bikes. You can contact me by PM or email at admin @ amxmgs.com Last edited by RySem; 10-18-2009 at 10:10 AM.

10-18-2009, 12:13 PM	#2 (permalink)
TankTheory 2nd Gear Member Join Date: Jun 2007 Location: .860. Posts: 549 My Mood:	Re: Honda 70's and Parts Galore! Sell me that luggage rack, have a .6 gal gas tank calls for me needing to carry a small back up and I need that racckk

10-18-2009, 01:30 PM	#3 (permalink)
dfred15 2nd Gear Member Join Date: Sep 2006 Location: Holley, New York Posts: 380	Re: Honda 70's and Parts Galore! do you have titles for any of these bikes?

10-18-2009, 10:05 PM	#5 (permalink)
Liquid Joe 2nd Gear Member Join Date: Dec 2007 Location: Visalia, Ca Posts: 341 My Mood:	Re: Honda 70's and Parts Galore! do you have any seats? How much shipped to 93277?

10-24-2009, 12:13 AM	#7 (permalink)
s_10onbagz 3rd Gear Member Join Date: Sep 2007 Location: Connecticut. Posts: 1,550	Re: Honda 70's and Parts Galore! damn man. you have so many bikes it amazes me. Do you have any good 4 speed trannies or 72cc jugs? how is the atc bottom end and jug looking?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)