Planet Minis

goldenboy81 · 07-03-2009, 08:42 PM

These are considered two separate items. You may buy them together or separate.
Email: horan8177@hotmail.com

1. Selling Brand New M6 (M-6) Two Brothers Muffler / Exhaust.
Not a scratch on this baby, never even been mounted, it’s only been taken out of the box (pictures just shows finger prints).
Sold!

2. Selling New (but slightly modified) Header Pipe for Two Brothers M6 (M-6) Yamaha TTR50 Serial # 005-3101H. Got the wrong pipe, tried to mount it on a GPX160cc and had to do some modifications in the process (nothing major). Pipe was heated at the second bend out of the header in order to bend it some (was bent only slightly before I realized the pipe was too short for my setup). See picture for heat marks. I also had to bore out the holes of the plate that holds the exhaust to the header to accommodate larger bolts (see pictures for details). Plate still works fine because nuts hold it tight to header. Worse case, you can get a new plate. Other than that, pipe is in good working order with no scratches. It has never even been ran.
$50 (Shipped)

goldenboy81 · 07-06-2009, 03:56 PM

bump

goldenboy81 · 07-13-2009, 07:48 PM

"Buy It Now" here or on Ebay for $125 (can) or $50 (pipe) shipped. User name on ebay is goldenboy81

121 rating with 100% positive feedback.

johnnyman88 · 07-14-2009, 01:10 AM

will it fit my sdg 50, but i have a gpx 125 on it?? can you sell both for a lower price? price quote to 96720

goldenboy81 · 07-14-2009, 07:16 AM

I'm not sure if it will fit your SDG50, you might want to check with Two Brothers (they have good customer service).
1.800.211.2767 or
Monday - Friday
8:00am - 5:00pm PST
1-714-550-6070
1-800-211-2767

As for the price, this is around a $240 system (with shipping). I have discounted it $75, down to $175 for both, only because I made a slight bend...probably 1/2" on the pipe (which can easily be bent back). Lowest I would go for both would probably be $160 shipped.....($90 off). Hope this helps...

07-03-2009, 08:42 PM	#1 (permalink)
goldenboy81 PM Newbie Join Date: Dec 2008 Location: Denver, Colorado Posts: 28	Two Brothers Exhaust / Muffler and Header Pipe (Brand New) These are considered two separate items. You may buy them together or separate. Email: horan8177@hotmail.com 1. Selling Brand New M6 (M-6) Two Brothers Muffler / Exhaust. Not a scratch on this baby, never even been mounted, it’s only been taken out of the box (pictures just shows finger prints). Sold! 2. Selling New (but slightly modified) Header Pipe for Two Brothers M6 (M-6) Yamaha TTR50 Serial # 005-3101H. Got the wrong pipe, tried to mount it on a GPX160cc and had to do some modifications in the process (nothing major). Pipe was heated at the second bend out of the header in order to bend it some (was bent only slightly before I realized the pipe was too short for my setup). See picture for heat marks. I also had to bore out the holes of the plate that holds the exhaust to the header to accommodate larger bolts (see pictures for details). Plate still works fine because nuts hold it tight to header. Worse case, you can get a new plate. Other than that, pipe is in good working order with no scratches. It has never even been ran. $50 (Shipped) Last edited by goldenboy81; 07-19-2009 at 08:41 PM.

07-06-2009, 03:56 PM	#2 (permalink)
goldenboy81 PM Newbie Join Date: Dec 2008 Location: Denver, Colorado Posts: 28	Re: Two Brothers Exhaust / Muffler and Header Pipe (Brand New) bump

07-13-2009, 07:48 PM	#3 (permalink)
goldenboy81 PM Newbie Join Date: Dec 2008 Location: Denver, Colorado Posts: 28	Re: Two Brothers Exhaust / Muffler and Header Pipe (Brand New) "Buy It Now" here or on Ebay for $125 (can) or $50 (pipe) shipped. User name on ebay is goldenboy81 121 rating with 100% positive feedback.

07-14-2009, 01:10 AM	#4 (permalink)
johnnyman88 1st Gear Member Join Date: May 2009 Posts: 177	Re: Two Brothers Exhaust / Muffler and Header Pipe (Brand New) will it fit my sdg 50, but i have a gpx 125 on it?? can you sell both for a lower price? price quote to 96720

07-14-2009, 07:16 AM	#5 (permalink)
goldenboy81 PM Newbie Join Date: Dec 2008 Location: Denver, Colorado Posts: 28	Re: Two Brothers Exhaust / Muffler and Header Pipe (Brand New) I'm not sure if it will fit your SDG50, you might want to check with Two Brothers (they have good customer service). 1.800.211.2767 or Monday - Friday 8:00am - 5:00pm PST 1-714-550-6070 1-800-211-2767 As for the price, this is around a $240 system (with shipping). I have discounted it $75, down to $175 for both, only because I made a slight bend...probably 1/2" on the pipe (which can easily be bent back). Lowest I would go for both would probably be $160 shipped.....($90 off). Hope this helps...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)