Planet Minis

ballzee99 · 10-07-2009, 12:29 PM

Does anyone know where I can purchase the front motor mounts for a YSR ,XR100 conversion? Or anyone fabricate these for me to save me some time with my build? If someone has a template that would work too. Any help is appreciated. Thanks

Nooblette · 10-08-2009, 11:18 AM

just use the original ysr engine mounts turned 1/4 turn.

ballzee99 · 10-08-2009, 11:43 AM

I have seen people on here fabricate a mount that secures the xr100 motor at two points to the frame. I am looking to duplicate this, but will most likely have to make them myself if no one has a template.

fireman_343 · 10-08-2009, 06:31 PM

If I had a YSR frame to mess with, I would make them also.. but for now all I make are brackets for the NSR.
From the ones I've seen in our club, I believe the guys are only using the one hole and has held up fine. Good luck

ballzee99 · 10-09-2009, 05:15 AM

Quote:

Originally Posted by fireman_343

If I had a YSR frame to mess with, I would make them also.. but for now all I make are brackets for the NSR.
From the ones I've seen in our club, I believe the guys are only using the one hole and has held up fine. Good luck

How thick of steel do you recommend to use for the brackets? What have you been using for the NSR? I am only going to use the single front hole for the mount. Thanks

fireman_343 · 10-12-2009, 08:04 AM

I use 1/4" Alum for my stuff.

I took a closer look at the YXR this weekend and it has a XR80 front down tube welded to the stock YSR one... works great.. then the upper rear bolts right to the YSR stock motor mounts and the bottom ones do not need to be mounted.

10-07-2009, 12:29 PM	#1 (permalink)
ballzee99 PM Newbie Join Date: Nov 2008 Location: MA Posts: 41	YXR Front Motor Mounts Does anyone know where I can purchase the front motor mounts for a YSR ,XR100 conversion? Or anyone fabricate these for me to save me some time with my build? If someone has a template that would work too. Any help is appreciated. Thanks

10-08-2009, 11:18 AM	#2 (permalink)
Nooblette 1st Gear Member Join Date: Apr 2008 Location: Fresno, Ca. Posts: 200	Re: YXR Front Motor Mounts just use the original ysr engine mounts turned 1/4 turn.

10-08-2009, 11:43 AM	#3 (permalink)
ballzee99 PM Newbie Join Date: Nov 2008 Location: MA Posts: 41	Re: YXR Front Motor Mounts I have seen people on here fabricate a mount that secures the xr100 motor at two points to the frame. I am looking to duplicate this, but will most likely have to make them myself if no one has a template.

10-08-2009, 06:31 PM	#4 (permalink)
fireman_343 2nd Gear Member Join Date: Mar 2007 Location: Blacklick Ohio Posts: 358 My Mood:	Re: YXR Front Motor Mounts If I had a YSR frame to mess with, I would make them also.. but for now all I make are brackets for the NSR. From the ones I've seen in our club, I believe the guys are only using the one hole and has held up fine. Good luck

10-12-2009, 08:04 AM	#6 (permalink)
fireman_343 2nd Gear Member Join Date: Mar 2007 Location: Blacklick Ohio Posts: 358 My Mood:	Re: YXR Front Motor Mounts I use 1/4" Alum for my stuff. I took a closer look at the YXR this weekend and it has a XR80 front down tube welded to the stock YSR one... works great.. then the upper rear bolts right to the YSR stock motor mounts and the bottom ones do not need to be mounted.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)