Planet Minis

Clay18 · 04-30-2008, 10:19 AM

There didn't seem to be much interest in the whole bike so I'm just going to part this thing out. Here's the list as far as I can remember...
Prices do not include a 3% paypal fee and shipping

500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working.
700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go.
175 VHM head w/(I believe) high compression insert
25 radiator and hoses
30 swingarm, nuts have been welded in or "fixed" to repair what the factory should have
400 for each set of wheels. These are 2.15" Cyclone 12" rims, Buchanon heavy duty spokes. One set has Sava rain tires and the other Bridgestone BT'601ss, both have plenty of life left in them and come with rotors.
100 front brake assy (03/04 style)
100 rear brake assy (03/04 style)
100 clutch assy
60 Doma pipe
90 26mm carb, 32.5 pilot, 230 main
700 Marzochi Shiver forks w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated)
100 Stock revalved for road racing shock, 85nm Ohlins spring
250 BUD Orange triple clamps w/Easton "fat" bars
40 Acerbis bark busters
50 black tank w/new petcock and gas cap
40 Seat w/KTM FX seat cover in perfect shape
90 Boysen Rad valve w/new reeds
20 Throttle plus cable
30 Spare orange tank
30 airbox and subframe
60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear
20 ASV F3 black clutch lever, has been down but still works great.
25 ASV F1 brand new silver clutch lever, never used
30 CDI, coil and wiring harness (2 sets)
10 kill switch

You can pick and choose on the plastics. The rear is black, but has those small cracks on it where the fender meets the # plates, I have nearly new orange shrouds and then the ones off the OEM KTM, plus organe # plate and front fender. The front fender has some holes drilled in it though for mounting a camera.

If you can think of something I missed, feel free to ask.

TWISTED · 04-30-2008, 11:17 AM

Photos of the forks please. Do the forks include the front brake, front wheel, and clamps?

Clay18 · 04-30-2008, 11:26 AM

The 700 price does not include anything but the forks; but I have everything listed there. These are the aftermarket zoch's...not the stock ones, so they are an upgrade over buying stock ones off a KTM. I paid 1000 for these from Paxracing.

Here's a pic of the bike with the forks on. There was a small amount of scratching where a transponder mount was on, but overall they are in excellent condition.

TWISTED · 04-30-2008, 11:56 AM

Thanks, bike looks really nice.
Did you already sell the original oem KTM front end?
Thanks

What's the price for the complete bike.

Clay18 · 04-30-2008, 12:05 PM

Yup. I was selling the whole bike for 2500, or with a whole spares package that included an engine and rain tires on rims for 3400.

Clay18 · 05-02-2008, 04:39 AM

Current list:
500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working.
700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go.
175 VHM head w/(I believe) high compression insert
25 radiator and hoses
30 swingarm, nuts have been welded in or "fixed" to repair what the factory should have
100 front brake assy (03/04 style)
100 rear brake assy (03/04 style)
100 clutch assy
700 Marzochi Shiver forks w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated)
100 Stock revalved for road racing shock, 85nm Ohlins spring
40 Acerbis bark busters
40 Seat w/KTM FX seat cover in perfect shape
30 Spare orange tank
60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear
25 ASV F1 brand new silver clutch lever, never used
10 kill switch

FastMC · 05-02-2008, 08:49 PM

Clay...Please post up some outside contact info in your add...Thanks...click:http://www.planetminis.com/f10/class...les-78276.html

Clay18 · 05-03-2008, 06:15 AM

Email is clay_n_adams at yahoo dot com

Clay18 · 05-05-2008, 04:09 AM

Current list:

500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working.
700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go.
175 VHM head w/(I believe) high compression insert
100 front brake assy (03/04 style)
100 clutch assy
700 Marzochi Shiver forks w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated)
100 Stock revalved for road racing shock, 600lb Eibach spring
40 Acerbis bark busters
40 Seat w/KTM FX seat cover in perfect shape
30 Spare orange tank
60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear
25 ASV F1 brand new silver clutch lever, never used
10 kill switch
85 Crank. This came out of a near brand new '04. It has about 1 hour on it. It's literally like new
30 Kickstarter

Clay18 · 05-09-2008, 06:23 AM

Feel free to make an offer on anything if you're interested. I may not take it, but I also might.

Clay18 · 05-23-2008, 03:47 AM

Current list:

500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working.
700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go.
100 front brake assy (03/04 style)
100 clutch assy
700 Marzochi Shiver forks (THESE ARE THE UPGRADED AFTERMARKET...NOT KTM OEM!) w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated, also includes the full MX cartridges and springs that came in them)
100 Stock revalved for road racing shock, 600lb Eibach spring
40 Acerbis bark busters
40 Seat w/KTM FX seat cover in perfect shape
30 Spare orange tank
60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear
25 ASV F1 brand new silver clutch lever, never used
10 kill switch
85 Crank. This came out of a near brand new '04. It has about 1 hour on it. It's literally like new
30 Kickstarter

Clay18 · 05-23-2008, 03:47 AM

Current list:

500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working.
700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go.
100 front brake assy (03/04 style)
100 clutch assy
700 Marzochi Shiver forks (THESE ARE THE UPGRADED AFTERMARKET...NOT KTM OEM!) w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated, also includes the full MX cartridges and springs that came in them)
100 Stock revalved for road racing shock, 600lb Eibach spring
40 Acerbis bark busters
40 Seat w/KTM FX seat cover in perfect shape
30 Spare orange tank
60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear
25 ASV F1 brand new silver clutch lever, never used
10 kill switch
85 Crank. This came out of a near brand new '04. It has about 1 hour on it. It's literally like new
30 Kickstarter

507 brett · 05-24-2008, 07:39 AM

pmd you on the frnt brakes

Clay18 · 06-04-2008, 08:20 PM

Dropping 50 off the forks and built engine.

Current list:
650 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go.
100 lever, clutch master cylinder and actuator assy
650 Marzochi Shiver forks w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated, stock cartidge kit and springs included)
100 revalved for road racing shock, 600lb Eibach spring
40 Acerbis orange bark busters
30 Spare orange tank
25 ASV F1 brand new silver clutch lever, never used
10 kill switch
85 Crank. This came out of a near brand new '04. It has about 1 hour on it. It's literally like new
30 Kickstarter

Clay18 · 06-16-2008, 07:46 AM

If anyone wants parts, feel free to make an offer!

smracer · 07-02-2008, 12:18 PM

Please contact me i am interested in your parts not on computer alot call me asap,rich,925 250-9172

xulcuz · 07-02-2008, 02:28 PM

I just need the front brake caliper how much? I dont want the full front brake...

Clay18 · 07-02-2008, 03:47 PM

I don't have the front brake anymore.

smracer, PM me with any needs.

edeslaur · 07-15-2009, 09:39 PM

PM'd
40 Acerbis orange bark busters
25 ASV F1 brand new silver clutch lever, never used

AFROracing · 08-04-2009, 09:39 AM

still parting?
I need a kickstart lever..

04-30-2008, 10:19 AM	#1 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Parting out ktm65, including marzochi shiver forks There didn't seem to be much interest in the whole bike so I'm just going to part this thing out. Here's the list as far as I can remember... Prices do not include a 3% paypal fee and shipping 500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working. 700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go. 175 VHM head w/(I believe) high compression insert 25 radiator and hoses 30 swingarm, nuts have been welded in or "fixed" to repair what the factory should have 400 for each set of wheels. These are 2.15" Cyclone 12" rims, Buchanon heavy duty spokes. One set has Sava rain tires and the other Bridgestone BT'601ss, both have plenty of life left in them and come with rotors. 100 front brake assy (03/04 style) 100 rear brake assy (03/04 style) 100 clutch assy 60 Doma pipe 90 26mm carb, 32.5 pilot, 230 main 700 Marzochi Shiver forks w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated) 100 Stock revalved for road racing shock, 85nm Ohlins spring 250 BUD Orange triple clamps w/Easton "fat" bars 40 Acerbis bark busters 50 black tank w/new petcock and gas cap 40 Seat w/KTM FX seat cover in perfect shape 90 Boysen Rad valve w/new reeds 20 Throttle plus cable 30 Spare orange tank 30 airbox and subframe 60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear 20 ASV F3 black clutch lever, has been down but still works great. 25 ASV F1 brand new silver clutch lever, never used 30 CDI, coil and wiring harness (2 sets) 10 kill switch You can pick and choose on the plastics. The rear is black, but has those small cracks on it where the fender meets the # plates, I have nearly new orange shrouds and then the ones off the OEM KTM, plus organe # plate and front fender. The front fender has some holes drilled in it though for mounting a camera. If you can think of something I missed, feel free to ask.

04-30-2008, 11:17 AM	#2 (permalink)
TWISTED 2nd Gear Member Join Date: Jan 2008 Location: Salem, OR Posts: 689	Re: Parting out ktm65, including marzochi shiver forks Photos of the forks please. Do the forks include the front brake, front wheel, and clamps?

04-30-2008, 11:26 AM	#3 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks The 700 price does not include anything but the forks; but I have everything listed there. These are the aftermarket zoch's...not the stock ones, so they are an upgrade over buying stock ones off a KTM. I paid 1000 for these from Paxracing. Here's a pic of the bike with the forks on. There was a small amount of scratching where a transponder mount was on, but overall they are in excellent condition.

04-30-2008, 11:56 AM	#4 (permalink)
TWISTED 2nd Gear Member Join Date: Jan 2008 Location: Salem, OR Posts: 689	Re: Parting out ktm65, including marzochi shiver forks Thanks, bike looks really nice. Did you already sell the original oem KTM front end? Thanks What's the price for the complete bike.

04-30-2008, 12:05 PM	#5 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks Yup. I was selling the whole bike for 2500, or with a whole spares package that included an engine and rain tires on rims for 3400.

05-02-2008, 04:39 AM	#6 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks Current list: 500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working. 700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go. 175 VHM head w/(I believe) high compression insert 25 radiator and hoses 30 swingarm, nuts have been welded in or "fixed" to repair what the factory should have 100 front brake assy (03/04 style) 100 rear brake assy (03/04 style) 100 clutch assy 700 Marzochi Shiver forks w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated) 100 Stock revalved for road racing shock, 85nm Ohlins spring 40 Acerbis bark busters 40 Seat w/KTM FX seat cover in perfect shape 30 Spare orange tank 60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear 25 ASV F1 brand new silver clutch lever, never used 10 kill switch

05-02-2008, 08:49 PM	#7 (permalink)
FastMC Sporting the Merkin Join Date: Mar 2004 Location: boston area Posts: 5,072 My Mood:	Re: Parting out ktm65, including marzochi shiver forks Clay...Please post up some outside contact info in your add...Thanks...click:http://www.planetminis.com/f10/class...les-78276.html

05-03-2008, 06:15 AM	#8 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks Email is clay_n_adams at yahoo dot com

05-05-2008, 04:09 AM	#9 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks Current list: 500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working. 700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go. 175 VHM head w/(I believe) high compression insert 100 front brake assy (03/04 style) 100 clutch assy 700 Marzochi Shiver forks w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated) 100 Stock revalved for road racing shock, 600lb Eibach spring 40 Acerbis bark busters 40 Seat w/KTM FX seat cover in perfect shape 30 Spare orange tank 60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear 25 ASV F1 brand new silver clutch lever, never used 10 kill switch 85 Crank. This came out of a near brand new '04. It has about 1 hour on it. It's literally like new 30 Kickstarter

05-09-2008, 06:23 AM	#10 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks Feel free to make an offer on anything if you're interested. I may not take it, but I also might.

05-23-2008, 03:47 AM	#11 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks Current list: 500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working. 700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go. 100 front brake assy (03/04 style) 100 clutch assy 700 Marzochi Shiver forks (THESE ARE THE UPGRADED AFTERMARKET...NOT KTM OEM!) w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated, also includes the full MX cartridges and springs that came in them) 100 Stock revalved for road racing shock, 600lb Eibach spring 40 Acerbis bark busters 40 Seat w/KTM FX seat cover in perfect shape 30 Spare orange tank 60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear 25 ASV F1 brand new silver clutch lever, never used 10 kill switch 85 Crank. This came out of a near brand new '04. It has about 1 hour on it. It's literally like new 30 Kickstarter

05-23-2008, 03:47 AM	#12 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks Current list: 500 spare stock engine (will sell top and bottom apart) Needs a new stator but I will include a working spare. Is missing the pressure plate on the clutch but otherwise completely intact and working. 700 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go. 100 front brake assy (03/04 style) 100 clutch assy 700 Marzochi Shiver forks (THESE ARE THE UPGRADED AFTERMARKET...NOT KTM OEM!) w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated, also includes the full MX cartridges and springs that came in them) 100 Stock revalved for road racing shock, 600lb Eibach spring 40 Acerbis bark busters 40 Seat w/KTM FX seat cover in perfect shape 30 Spare orange tank 60 Sprocket set 13, 14 front, 38, 44, 46, 47, 48, 49, 50 rear 25 ASV F1 brand new silver clutch lever, never used 10 kill switch 85 Crank. This came out of a near brand new '04. It has about 1 hour on it. It's literally like new 30 Kickstarter

05-24-2008, 07:39 AM	#13 (permalink)
507 brett 3rd Gear Member Join Date: Jan 2007 Location: mt. pleasant, NC Posts: 2,406	Re: Parting out ktm65, including marzochi shiver forks pmd you on the frnt brakes

06-04-2008, 08:20 PM	#14 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks Dropping 50 off the forks and built engine. Current list: 650 Fully built by Jbone motorworks engine. That's cases, cylinder and head modified, also includes a coated billet clutch basket. FRESH top end, less than 2hours on it. NOTHING needed, put it in and go. 100 lever, clutch master cylinder and actuator assy 650 Marzochi Shiver forks w/ 700$ full road race revalve, .50 springs (external adjustments, DLC coated, stock cartidge kit and springs included) 100 revalved for road racing shock, 600lb Eibach spring 40 Acerbis orange bark busters 30 Spare orange tank 25 ASV F1 brand new silver clutch lever, never used 10 kill switch 85 Crank. This came out of a near brand new '04. It has about 1 hour on it. It's literally like new 30 Kickstarter

06-16-2008, 07:46 AM	#15 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks If anyone wants parts, feel free to make an offer!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

07-02-2008, 12:18 PM	#16 (permalink)
smracer PM Newbie Join Date: Jul 2008 Posts: 2	Re: Parting out ktm65, including marzochi shiver forks Please contact me i am interested in your parts not on computer alot call me asap,rich,925 250-9172

07-02-2008, 02:28 PM	#17 (permalink)
xulcuz 3rd Gear Member Join Date: Jun 2005 Location: Holland, Michigan Posts: 2,035	Re: Parting out ktm65, including marzochi shiver forks I just need the front brake caliper how much? I dont want the full front brake...

07-02-2008, 03:47 PM	#18 (permalink)
Clay18 1st Gear Member Join Date: Oct 2006 Location: Fuquay Varina, NC Posts: 127	Re: Parting out ktm65, including marzochi shiver forks I don't have the front brake anymore. smracer, PM me with any needs.

07-15-2009, 09:39 PM	#19 (permalink)
edeslaur PM Newbie Join Date: Jul 2009 Posts: 2	Re: Parting out ktm65, including marzochi shiver forks PM'd 40 Acerbis orange bark busters 25 ASV F1 brand new silver clutch lever, never used

08-04-2009, 09:39 AM	#20 (permalink)
AFROracing 1st Gear Member Join Date: Oct 2006 Posts: 103 My Mood:	Re: Parting out ktm65, including marzochi shiver forks still parting? I need a kickstart lever..