Planet Minis

xtreme122 · 10-20-2009, 09:19 PM

im working on a 1984 yz80 and it needs a top end so i pulled the piston and cylinder off only to find that the crank case was filled with fuel so i went to drain it but only a little bit of oil came out and no fuel/oil mix so i pulled the clutch cover off and nothing came out and the crank case is still full and i want to know why it wont drain or how do i drain it?

Paxracing · 10-20-2009, 09:21 PM

flip the bike up size down

xtreme122 · 10-20-2009, 09:25 PM

i was thinking that but didnt know if it would hurt anything and when i reassymble do i need to ad oil back in the center case?

Paxracing · 10-20-2009, 09:27 PM

No, Mix the oil in the gas is all you need.

xtreme122 · 10-20-2009, 09:31 PM

but i do need to put gear oil back in right? and see if you can help me. the bike ran a while back but now it wont start and the crank case was filler with fuel and with everything together i could kick it over by hand. what would you say is wrong, i thunk rings

Paxracing · 10-20-2009, 09:37 PM

Sorry yes put oil in the gear box. , what would you say is wrong I would check piston,,cylinder . rings and reeds

xtreme122 · 10-20-2009, 09:43 PM

the iston and cylinder are good. im gonna put rings in it. how much do reeds go for

Paxracing · 10-20-2009, 09:45 PM

Stock $ 60.00 after market up to a $ 100.00 a set.

10-20-2009, 09:19 PM	#1 (permalink)
xtreme122 2nd Gear Member Join Date: Jul 2006 Location: Bergheim, TX Posts: 439	help!!!!!! im working on a 1984 yz80 and it needs a top end so i pulled the piston and cylinder off only to find that the crank case was filled with fuel so i went to drain it but only a little bit of oil came out and no fuel/oil mix so i pulled the clutch cover off and nothing came out and the crank case is still full and i want to know why it wont drain or how do i drain it?

10-20-2009, 09:21 PM	#2 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,519 My Mood:	Re: help!!!!!! flip the bike up size down

10-20-2009, 09:25 PM	#3 (permalink)
xtreme122 2nd Gear Member Join Date: Jul 2006 Location: Bergheim, TX Posts: 439	Re: help!!!!!! i was thinking that but didnt know if it would hurt anything and when i reassymble do i need to ad oil back in the center case?

10-20-2009, 09:27 PM	#4 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,519 My Mood:	Re: help!!!!!! No, Mix the oil in the gas is all you need.

10-20-2009, 09:31 PM	#5 (permalink)
xtreme122 2nd Gear Member Join Date: Jul 2006 Location: Bergheim, TX Posts: 439	Re: help!!!!!! but i do need to put gear oil back in right? and see if you can help me. the bike ran a while back but now it wont start and the crank case was filler with fuel and with everything together i could kick it over by hand. what would you say is wrong, i thunk rings

10-20-2009, 09:37 PM	#6 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,519 My Mood:	Re: help!!!!!! Sorry yes put oil in the gear box. , what would you say is wrong I would check piston,,cylinder . rings and reeds

10-20-2009, 09:43 PM	#7 (permalink)
xtreme122 2nd Gear Member Join Date: Jul 2006 Location: Bergheim, TX Posts: 439	Re: help!!!!!! the iston and cylinder are good. im gonna put rings in it. how much do reeds go for

10-20-2009, 09:45 PM	#8 (permalink)
Paxracing 3rd Gear Member Join Date: Mar 2004 Location: ca Posts: 5,519 My Mood:	Re: help!!!!!! Stock $ 60.00 after market up to a $ 100.00 a set.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)