Planet Minis

FASTFREAK693 · 10-20-2009, 07:14 PM

Here's a few crappy cell pictures of my K-LXR build.....

05 KLX 110 engine with these mods:

-TB 143
-TB V2 head ported with Takegawa S25 decomp cam
-TB manual clutch cover
-TB 4th gear shift drum
-Takegawa 6 disc clutch, primary gear, and output shaft
-CHP billet 2nd gear and shift star
-VM26 carb with a TB intake (Soon to be a PWK2

-BBR U-flow with K&N filter and outer cover
-Two Bros bump start, dress up kit and shifter
-Red Barron skid plate **modded to fit properly**

09 Pitster Pro LXR 14/12 roller with KLX mounts and these mods:

-modded motor mounts and frame to move engine back a little and reinforce the shock mount. Tire doesn't hit the lower valve cover now!

-VINCO SHOWA

front forks with machined stem and clamps, to accept LXR bearings, # plate, and fender
-ReegMX front hub with an Excel wheel and Bucanon spokes
-Grimica 6 piston front caliper W Galfar wave rotor. Stops on a dime and its light as hell! **Thanks to Minirider54 for the deal on this fork setup!**
-Pitster Pro black LXR plastic kit with Acerbis black CRF150 fork guards
-MAGIKSC Kustoms Hotwheels graphics and # plates made to look like the old X4 I built. **Thanks a million Tyler, your the man!**
-Tag metals mini bend fat bars with ASV C5 shorty clutch lever, and Wirtz throttle

I still want to add a few more things to it like a Takegawa clutch cover and close ratio 4 speed trans, Doma or ??? exhaust, a Fox shock and have the forks and shock tuned by Odi at Feal suspension. Also this winter while the bike is apart I'm going to have the rear hub assembly anodized red, to match the Reeg front hub, and lace up a black Excel wheel to match the front. Some STR colored brake and oil lines, along with their YZF250 rear master cyl. mount.

So far the chassis and engine have been flawless! I ride it 1 or 2 times a week on a 1 mile big bike MX track and haven't had any failures. It handles like no other pitbike I have ever ridden and makes it waaaay easy to ride faster than I ever thought I'd go on one of these. I've suprised a few guys on 250f's at the track

So what do you guys think?

hollywood213 · 10-20-2009, 07:35 PM

uh oh! looks like i got competition!! thast it! as soon as my motor is finished getting put back together i gotta put a new pic up to comepte with this! bike looks tight tho!

FASTFREAK693 · 10-20-2009, 07:39 PM

Quote:

Originally Posted by hollywood213

uh oh! looks like i got competition!! thast it! as soon as my motor is finished getting put back together i gotta put a new pic up to comepte with this! bike looks tight tho!

Thanks for selling minirider54 your Showas so he could trade them to me

I got nothing for you in the motor department. LOL!

hollywood213 · 10-20-2009, 07:40 PM

you do in the looks department!!

FASTFREAK693 · 10-20-2009, 07:43 PM

Quote:

Originally Posted by hollywood213

you do in the looks department!!

Thanks!

Motors win races though

twosmoke30 · 10-20-2009, 07:54 PM

Quote:

Originally Posted by FASTFREAK693

Thanks!

Motors win races though

but looks get trophy girls lol

hollywood213 · 10-20-2009, 08:02 PM

haha true

SUZUKIRM12594 · 10-20-2009, 08:19 PM

That bike is incredible. I had the same U-Flow set up as you but decided to tone down the bulk and just bolted the k&n straight on the carb. That bike would look awesome with a gripper seat cover BTW.

FASTFREAK693 · 10-20-2009, 08:31 PM

Quote:

Originally Posted by SUZUKIRM12594

That bike is incredible. I had the same U-Flow set up as you but decided to tone down the bulk and just bolted the k&n straight on the carb. That bike would look awesome with a gripper seat cover BTW.

Thanks alot!

The U-flow keeps the filter way cleaner than a forward facing one. Only drawback is I had to cut the front fender pretty short to clear it.

I was thinking about a seat cover from PAX but im undecided on the color. Black or Black sides with a YZ Blue center or maybe an all Red one like the TGR bike?

magiksc · 10-20-2009, 09:32 PM

Dang that thing is mean! You said it was gonna be unique but that is freakin' gnarly!

minirider54 · 10-20-2009, 09:38 PM

HoLy Sh!T!!!!! that thing looks sick man...so what do you think of the showas?

FASTFREAK693 · 10-20-2009, 09:42 PM

Here are a few more pictures. (still crappy cell pics)

Matified · 10-20-2009, 11:14 PM

Nice! Looks like LXRs are becomming popular for KLX swaps!!

deegan711 · 10-21-2009, 05:20 AM

looks trick dude

jake16 · 10-21-2009, 05:59 AM

get the doma exhaust

R3CKL3SS · 10-21-2009, 09:55 AM

sick ass bike

Wandell · 10-21-2009, 10:23 AM

Sweet!

FASTFREAK693 · 10-21-2009, 11:17 AM

Quote:

Originally Posted by minirider54

HoLy Sh!T!!!!! that thing looks sick man...so what do you think of the showas?

Those Showa forks are amazing! They make the bike sooooo easy to ride.

FASTFREAK693 · 10-21-2009, 11:18 AM

Quote:

Originally Posted by Matified

Nice! Looks like LXRs are becomming popular for KLX swaps!!

KLX engine conversions eliminate the weak link in the LXR.

mattmoto441 · 10-21-2009, 03:17 PM

looks real GOOD all she needs now is the PC pipe thats Coming for the LXR Bikes!!!

10-20-2009, 07:14 PM	#1 (permalink)
FASTFREAK693 3rd Gear Member Join Date: Nov 2006 Location: LITTLE COMPTON R.I. Posts: 1,790 My Mood:	My K-LXR build so far Here's a few crappy cell pictures of my K-LXR build..... 05 KLX 110 engine with these mods: -TB 143 -TB V2 head ported with Takegawa S25 decomp cam -TB manual clutch cover -TB 4th gear shift drum -Takegawa 6 disc clutch, primary gear, and output shaft -CHP billet 2nd gear and shift star -VM26 carb with a TB intake (Soon to be a PWK2 -BBR U-flow with K&N filter and outer cover -Two Bros bump start, dress up kit and shifter -Red Barron skid plate modded to fit properly 09 Pitster Pro LXR 14/12 roller with KLX mounts and these mods: -modded motor mounts and frame to move engine back a little and reinforce the shock mount. Tire doesn't hit the lower valve cover now! -VINCO SHOWA front forks with machined stem and clamps, to accept LXR bearings, # plate, and fender -ReegMX front hub with an Excel wheel and Bucanon spokes -Grimica 6 piston front caliper W Galfar wave rotor. Stops on a dime and its light as hell! Thanks to Minirider54 for the deal on this fork setup! -Pitster Pro black LXR plastic kit with Acerbis black CRF150 fork guards -MAGIKSC Kustoms Hotwheels graphics and # plates made to look like the old X4 I built. Thanks a million Tyler, your the man! -Tag metals mini bend fat bars with ASV C5 shorty clutch lever, and Wirtz throttle I still want to add a few more things to it like a Takegawa clutch cover and close ratio 4 speed trans, Doma or ??? exhaust, a Fox shock and have the forks and shock tuned by Odi at Feal suspension. Also this winter while the bike is apart I'm going to have the rear hub assembly anodized red, to match the Reeg front hub, and lace up a black Excel wheel to match the front. Some STR colored brake and oil lines, along with their YZF250 rear master cyl. mount. So far the chassis and engine have been flawless! I ride it 1 or 2 times a week on a 1 mile big bike MX track and haven't had any failures. It handles like no other pitbike I have ever ridden and makes it waaaay easy to ride faster than I ever thought I'd go on one of these. I've suprised a few guys on 250f's at the track So what do you guys think? Last edited by FASTFREAK693; 10-20-2009 at 07:45 PM.

10-20-2009, 07:35 PM	#2 (permalink)
hollywood213 2nd Gear Member Join Date: Feb 2008 Location: Pittsburgh, PA Posts: 971 My Mood:	Re: My K-LXR build so far uh oh! looks like i got competition!! thast it! as soon as my motor is finished getting put back together i gotta put a new pic up to comepte with this! bike looks tight tho!

10-20-2009, 07:40 PM	#4 (permalink)
hollywood213 2nd Gear Member Join Date: Feb 2008 Location: Pittsburgh, PA Posts: 971 My Mood:	Re: My K-LXR build so far you do in the looks department!!

10-20-2009, 08:02 PM	#7 (permalink)
hollywood213 2nd Gear Member Join Date: Feb 2008 Location: Pittsburgh, PA Posts: 971 My Mood:	Re: My K-LXR build so far haha true

10-20-2009, 08:19 PM	#8 (permalink)
SUZUKIRM12594 3rd Gear Member Join Date: Jun 2008 Location: Glendale California Posts: 4,540 My Mood:	Re: My K-LXR build so far That bike is incredible. I had the same U-Flow set up as you but decided to tone down the bulk and just bolted the k&n straight on the carb. That bike would look awesome with a gripper seat cover BTW.

10-20-2009, 09:32 PM	#10 (permalink)
magiksc 3rd Gear Member Join Date: Oct 2006 Location: Somewhere between Heaven and Hell... Hemet/Provo Posts: 3,503 My Mood:	Re: My K-LXR build so far Dang that thing is mean! You said it was gonna be unique but that is freakin' gnarly!

10-20-2009, 09:38 PM	#11 (permalink)
minirider54 3rd Gear Member Join Date: Aug 2007 Location: CT Posts: 2,084	Re: My K-LXR build so far HoLy Sh!T!!!!! that thing looks sick man...so what do you think of the showas?

10-20-2009, 09:42 PM	#12 (permalink)
FASTFREAK693 3rd Gear Member Join Date: Nov 2006 Location: LITTLE COMPTON R.I. Posts: 1,790 My Mood:	Re: My K-LXR build so far Here are a few more pictures. (still crappy cell pics)

10-20-2009, 11:14 PM	#13 (permalink)
Matified Pitster Employee Join Date: Feb 2008 Location: USA Posts: 1,887	Re: My K-LXR build so far Nice! Looks like LXRs are becomming popular for KLX swaps!!

10-21-2009, 05:20 AM	#14 (permalink)
deegan711 PM Newbie Join Date: Sep 2008 Location: england Posts: 19	Re: My K-LXR build so far looks trick dude

10-21-2009, 05:59 AM	#15 (permalink)
jake16 2nd Gear Member Join Date: Jul 2008 Location: Dallas TX Posts: 669 My Mood:	Re: My K-LXR build so far get the doma exhaust

10-21-2009, 09:55 AM	#16 (permalink)
R3CKL3SS 2nd Gear Member Join Date: Aug 2009 Location: PA NY Posts: 463 My Mood:	Re: My K-LXR build so far sick ass bike

10-21-2009, 10:23 AM	#17 (permalink)
Wandell 3rd Gear Member Join Date: Jul 2007 Location: Cairo, Georgia Posts: 1,467	Re: My K-LXR build so far Sweet!

10-21-2009, 03:17 PM	#20 (permalink)
mattmoto441 3rd Gear Member Join Date: Sep 2004 Location: unknown Posts: 1,891 My Mood:	Re: My K-LXR build so far looks real GOOD all she needs now is the PC pipe thats Coming for the LXR Bikes!!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)